+++ /dev/null
-# generated automatically by aclocal 1.11.6 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
-# Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
-[m4_warning([this file was generated for autoconf 2.69.
-You have another version of autoconf. It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
-
-dnl ---------------------------------------------------------------------------
-dnl Author: wxWidgets development team,
-dnl Francesco Montorsi,
-dnl Bob McCown (Mac-testing)
-dnl Creation date: 24/11/2001
-dnl RCS-ID: $Id$
-dnl ---------------------------------------------------------------------------
-
-dnl ===========================================================================
-dnl Table of Contents of this macro file:
-dnl -------------------------------------
-dnl
-dnl SECTION A: wxWidgets main macros
-dnl - WX_CONFIG_OPTIONS
-dnl - WX_CONFIG_CHECK
-dnl - WXRC_CHECK
-dnl - WX_STANDARD_OPTIONS
-dnl - WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS
-dnl - WX_DETECT_STANDARD_OPTION_VALUES
-dnl
-dnl SECTION B: wxWidgets-related utilities
-dnl - WX_LIKE_LIBNAME
-dnl - WX_ARG_ENABLE_YESNOAUTO
-dnl - WX_ARG_WITH_YESNOAUTO
-dnl
-dnl SECTION C: messages to the user
-dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG
-dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN
-dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG_END
-dnl - WX_BOOLOPT_SUMMARY
-dnl
-dnl The special "WX_DEBUG_CONFIGURE" variable can be set to 1 to enable extra
-dnl debug output on stdout from these macros.
-dnl ===========================================================================
-
-
-dnl ---------------------------------------------------------------------------
-dnl Macros for wxWidgets detection. Typically used in configure.in as:
-dnl
-dnl AC_ARG_ENABLE(...)
-dnl AC_ARG_WITH(...)
-dnl ...
-dnl WX_CONFIG_OPTIONS
-dnl ...
-dnl ...
-dnl WX_CONFIG_CHECK([2.6.0], [wxWin=1])
-dnl if test "$wxWin" != 1; then
-dnl AC_MSG_ERROR([
-dnl wxWidgets must be installed on your system
-dnl but wx-config script couldn't be found.
-dnl
-dnl Please check that wx-config is in path, the directory
-dnl where wxWidgets libraries are installed (returned by
-dnl 'wx-config --libs' command) is in LD_LIBRARY_PATH or
-dnl equivalent variable and wxWidgets version is 2.3.4 or above.
-dnl ])
-dnl fi
-dnl CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS"
-dnl CXXFLAGS="$CXXFLAGS $WX_CXXFLAGS_ONLY"
-dnl CFLAGS="$CFLAGS $WX_CFLAGS_ONLY"
-dnl
-dnl LIBS="$LIBS $WX_LIBS"
-dnl
-dnl If you want to support standard --enable-debug/unicode/shared options, you
-dnl may do the following:
-dnl
-dnl ...
-dnl AC_CANONICAL_SYSTEM
-dnl
-dnl # define configure options
-dnl WX_CONFIG_OPTIONS
-dnl WX_STANDARD_OPTIONS([debug,unicode,shared,toolkit,wxshared])
-dnl
-dnl # basic configure checks
-dnl ...
-dnl
-dnl # we want to always have DEBUG==WX_DEBUG and UNICODE==WX_UNICODE
-dnl WX_DEBUG=$DEBUG
-dnl WX_UNICODE=$UNICODE
-dnl
-dnl WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS
-dnl WX_CONFIG_CHECK([2.8.0], [wxWin=1],,[html,core,net,base],[$WXCONFIG_FLAGS])
-dnl WX_DETECT_STANDARD_OPTION_VALUES
-dnl
-dnl # write the output files
-dnl AC_CONFIG_FILES([Makefile ...])
-dnl AC_OUTPUT
-dnl
-dnl # optional: just to show a message to the user
-dnl WX_STANDARD_OPTIONS_SUMMARY_MSG
-dnl
-dnl ---------------------------------------------------------------------------
-
-
-dnl ---------------------------------------------------------------------------
-dnl WX_CONFIG_OPTIONS
-dnl
-dnl adds support for --wx-prefix, --wx-exec-prefix, --with-wxdir and
-dnl --wx-config command line options
-dnl ---------------------------------------------------------------------------
-
-AC_DEFUN([WX_CONFIG_OPTIONS],
-[
- AC_ARG_WITH(wxdir,
- [ --with-wxdir=PATH Use uninstalled version of wxWidgets in PATH],
- [ wx_config_name="$withval/wx-config"
- wx_config_args="--inplace"])
- AC_ARG_WITH(wx-config,
- [ --with-wx-config=CONFIG wx-config script to use (optional)],
- wx_config_name="$withval" )
- AC_ARG_WITH(wx-prefix,
- [ --with-wx-prefix=PREFIX Prefix where wxWidgets is installed (optional)],
- wx_config_prefix="$withval", wx_config_prefix="")
- AC_ARG_WITH(wx-exec-prefix,
- [ --with-wx-exec-prefix=PREFIX
- Exec prefix where wxWidgets is installed (optional)],
- wx_config_exec_prefix="$withval", wx_config_exec_prefix="")
-])
-
-dnl Helper macro for checking if wx version is at least $1.$2.$3, set's
-dnl wx_ver_ok=yes if it is:
-AC_DEFUN([_WX_PRIVATE_CHECK_VERSION],
-[
- wx_ver_ok=""
- if test "x$WX_VERSION" != x ; then
- if test $wx_config_major_version -gt $1; then
- wx_ver_ok=yes
- else
- if test $wx_config_major_version -eq $1; then
- if test $wx_config_minor_version -gt $2; then
- wx_ver_ok=yes
- else
- if test $wx_config_minor_version -eq $2; then
- if test $wx_config_micro_version -ge $3; then
- wx_ver_ok=yes
- fi
- fi
- fi
- fi
- fi
- fi
-])
-
-dnl ---------------------------------------------------------------------------
-dnl WX_CONFIG_CHECK(VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND
-dnl [, WX-LIBS [, ADDITIONAL-WX-CONFIG-FLAGS]]]])
-dnl
-dnl Test for wxWidgets, and define WX_C*FLAGS, WX_LIBS and WX_LIBS_STATIC
-dnl (the latter is for static linking against wxWidgets). Set WX_CONFIG_NAME
-dnl environment variable to override the default name of the wx-config script
-dnl to use. Set WX_CONFIG_PATH to specify the full path to wx-config - in this
-dnl case the macro won't even waste time on tests for its existence.
-dnl
-dnl Optional WX-LIBS argument contains comma- or space-separated list of
-dnl wxWidgets libraries to link against. If it is not specified then WX_LIBS
-dnl and WX_LIBS_STATIC will contain flags to link with all of the core
-dnl wxWidgets libraries.
-dnl
-dnl Optional ADDITIONAL-WX-CONFIG-FLAGS argument is appended to wx-config
-dnl invocation command in present. It can be used to fine-tune lookup of
-dnl best wxWidgets build available.
-dnl
-dnl Example use:
-dnl WX_CONFIG_CHECK([2.6.0], [wxWin=1], [wxWin=0], [html,core,net]
-dnl [--unicode --debug])
-dnl ---------------------------------------------------------------------------
-
-dnl
-dnl Get the cflags and libraries from the wx-config script
-dnl
-AC_DEFUN([WX_CONFIG_CHECK],
-[
- dnl do we have wx-config name: it can be wx-config or wxd-config or ...
- if test x${WX_CONFIG_NAME+set} != xset ; then
- WX_CONFIG_NAME=wx-config
- fi
-
- if test "x$wx_config_name" != x ; then
- WX_CONFIG_NAME="$wx_config_name"
- fi
-
- dnl deal with optional prefixes
- if test x$wx_config_exec_prefix != x ; then
- wx_config_args="$wx_config_args --exec-prefix=$wx_config_exec_prefix"
- WX_LOOKUP_PATH="$wx_config_exec_prefix/bin"
- fi
- if test x$wx_config_prefix != x ; then
- wx_config_args="$wx_config_args --prefix=$wx_config_prefix"
- WX_LOOKUP_PATH="$WX_LOOKUP_PATH:$wx_config_prefix/bin"
- fi
- if test "$cross_compiling" = "yes"; then
- wx_config_args="$wx_config_args --host=$host_alias"
- fi
-
- dnl don't search the PATH if WX_CONFIG_NAME is absolute filename
- if test -x "$WX_CONFIG_NAME" ; then
- AC_MSG_CHECKING(for wx-config)
- WX_CONFIG_PATH="$WX_CONFIG_NAME"
- AC_MSG_RESULT($WX_CONFIG_PATH)
- else
- AC_PATH_PROG(WX_CONFIG_PATH, $WX_CONFIG_NAME, no, "$WX_LOOKUP_PATH:$PATH")
- fi
-
- if test "$WX_CONFIG_PATH" != "no" ; then
- WX_VERSION=""
-
- min_wx_version=ifelse([$1], ,2.2.1,$1)
- if test -z "$5" ; then
- AC_MSG_CHECKING([for wxWidgets version >= $min_wx_version])
- else
- AC_MSG_CHECKING([for wxWidgets version >= $min_wx_version ($5)])
- fi
-
- dnl don't add the libraries ($4) to this variable as this would result in
- dnl an error when it's used with --version below
- WX_CONFIG_WITH_ARGS="$WX_CONFIG_PATH $wx_config_args $5"
-
- WX_VERSION=`$WX_CONFIG_WITH_ARGS --version 2>/dev/null`
- wx_config_major_version=`echo $WX_VERSION | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- wx_config_minor_version=`echo $WX_VERSION | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- wx_config_micro_version=`echo $WX_VERSION | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-
- wx_requested_major_version=`echo $min_wx_version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- wx_requested_minor_version=`echo $min_wx_version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- wx_requested_micro_version=`echo $min_wx_version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-
- _WX_PRIVATE_CHECK_VERSION([$wx_requested_major_version],
- [$wx_requested_minor_version],
- [$wx_requested_micro_version])
-
- if test -n "$wx_ver_ok"; then
- AC_MSG_RESULT(yes (version $WX_VERSION))
- WX_LIBS=`$WX_CONFIG_WITH_ARGS --libs $4`
-
- dnl is this even still appropriate? --static is a real option now
- dnl and WX_CONFIG_WITH_ARGS is likely to contain it if that is
- dnl what the user actually wants, making this redundant at best.
- dnl For now keep it in case anyone actually used it in the past.
- AC_MSG_CHECKING([for wxWidgets static library])
- WX_LIBS_STATIC=`$WX_CONFIG_WITH_ARGS --static --libs $4 2>/dev/null`
- if test "x$WX_LIBS_STATIC" = "x"; then
- AC_MSG_RESULT(no)
- else
- AC_MSG_RESULT(yes)
- fi
-
- dnl starting with version 2.2.6 wx-config has --cppflags argument
- wx_has_cppflags=""
- if test $wx_config_major_version -gt 2; then
- wx_has_cppflags=yes
- else
- if test $wx_config_major_version -eq 2; then
- if test $wx_config_minor_version -gt 2; then
- wx_has_cppflags=yes
- else
- if test $wx_config_minor_version -eq 2; then
- if test $wx_config_micro_version -ge 6; then
- wx_has_cppflags=yes
- fi
- fi
- fi
- fi
- fi
-
- dnl starting with version 2.7.0 wx-config has --rescomp option
- wx_has_rescomp=""
- if test $wx_config_major_version -gt 2; then
- wx_has_rescomp=yes
- else
- if test $wx_config_major_version -eq 2; then
- if test $wx_config_minor_version -ge 7; then
- wx_has_rescomp=yes
- fi
- fi
- fi
- if test "x$wx_has_rescomp" = x ; then
- dnl cannot give any useful info for resource compiler
- WX_RESCOMP=
- else
- WX_RESCOMP=`$WX_CONFIG_WITH_ARGS --rescomp`
- fi
-
- if test "x$wx_has_cppflags" = x ; then
- dnl no choice but to define all flags like CFLAGS
- WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags $4`
- WX_CPPFLAGS=$WX_CFLAGS
- WX_CXXFLAGS=$WX_CFLAGS
-
- WX_CFLAGS_ONLY=$WX_CFLAGS
- WX_CXXFLAGS_ONLY=$WX_CFLAGS
- else
- dnl we have CPPFLAGS included in CFLAGS included in CXXFLAGS
- WX_CPPFLAGS=`$WX_CONFIG_WITH_ARGS --cppflags $4`
- WX_CXXFLAGS=`$WX_CONFIG_WITH_ARGS --cxxflags $4`
- WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags $4`
-
- WX_CFLAGS_ONLY=`echo $WX_CFLAGS | sed "s@^$WX_CPPFLAGS *@@"`
- WX_CXXFLAGS_ONLY=`echo $WX_CXXFLAGS | sed "s@^$WX_CFLAGS *@@"`
- fi
-
- ifelse([$2], , :, [$2])
-
- else
-
- if test "x$WX_VERSION" = x; then
- dnl no wx-config at all
- AC_MSG_RESULT(no)
- else
- AC_MSG_RESULT(no (version $WX_VERSION is not new enough))
- fi
-
- WX_CFLAGS=""
- WX_CPPFLAGS=""
- WX_CXXFLAGS=""
- WX_LIBS=""
- WX_LIBS_STATIC=""
- WX_RESCOMP=""
-
- if test ! -z "$5"; then
-
- wx_error_message="
- The configuration you asked for $PACKAGE_NAME requires a wxWidgets
- build with the following settings:
- $5
- but such build is not available.
-
- To see the wxWidgets builds available on this system, please use
- 'wx-config --list' command. To use the default build, returned by
- 'wx-config --selected-config', use the options with their 'auto'
- default values."
-
- fi
-
- wx_error_message="
- The requested wxWidgets build couldn't be found.
- $wx_error_message
-
- If you still get this error, then check that 'wx-config' is
- in path, the directory where wxWidgets libraries are installed
- (returned by 'wx-config --libs' command) is in LD_LIBRARY_PATH
- or equivalent variable and wxWidgets version is $1 or above."
-
- ifelse([$3], , AC_MSG_ERROR([$wx_error_message]), [$3])
-
- fi
- else
-
- WX_CFLAGS=""
- WX_CPPFLAGS=""
- WX_CXXFLAGS=""
- WX_LIBS=""
- WX_LIBS_STATIC=""
- WX_RESCOMP=""
-
- ifelse([$3], , :, [$3])
-
- fi
-
- AC_SUBST(WX_CPPFLAGS)
- AC_SUBST(WX_CFLAGS)
- AC_SUBST(WX_CXXFLAGS)
- AC_SUBST(WX_CFLAGS_ONLY)
- AC_SUBST(WX_CXXFLAGS_ONLY)
- AC_SUBST(WX_LIBS)
- AC_SUBST(WX_LIBS_STATIC)
- AC_SUBST(WX_VERSION)
- AC_SUBST(WX_RESCOMP)
-
- dnl need to export also WX_VERSION_MINOR and WX_VERSION_MAJOR symbols
- dnl to support wxpresets bakefiles (we export also WX_VERSION_MICRO for completeness):
- WX_VERSION_MAJOR="$wx_config_major_version"
- WX_VERSION_MINOR="$wx_config_minor_version"
- WX_VERSION_MICRO="$wx_config_micro_version"
- AC_SUBST(WX_VERSION_MAJOR)
- AC_SUBST(WX_VERSION_MINOR)
- AC_SUBST(WX_VERSION_MICRO)
-])
-
-dnl ---------------------------------------------------------------------------
-dnl Get information on the wxrc program for making C++, Python and xrs
-dnl resource files.
-dnl
-dnl AC_ARG_ENABLE(...)
-dnl AC_ARG_WITH(...)
-dnl ...
-dnl WX_CONFIG_OPTIONS
-dnl ...
-dnl WX_CONFIG_CHECK(2.6.0, wxWin=1)
-dnl if test "$wxWin" != 1; then
-dnl AC_MSG_ERROR([
-dnl wxWidgets must be installed on your system
-dnl but wx-config script couldn't be found.
-dnl
-dnl Please check that wx-config is in path, the directory
-dnl where wxWidgets libraries are installed (returned by
-dnl 'wx-config --libs' command) is in LD_LIBRARY_PATH or
-dnl equivalent variable and wxWidgets version is 2.6.0 or above.
-dnl ])
-dnl fi
-dnl
-dnl WXRC_CHECK([HAVE_WXRC=1], [HAVE_WXRC=0])
-dnl if test "x$HAVE_WXRC" != x1; then
-dnl AC_MSG_ERROR([
-dnl The wxrc program was not installed or not found.
-dnl
-dnl Please check the wxWidgets installation.
-dnl ])
-dnl fi
-dnl
-dnl CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS"
-dnl CXXFLAGS="$CXXFLAGS $WX_CXXFLAGS_ONLY"
-dnl CFLAGS="$CFLAGS $WX_CFLAGS_ONLY"
-dnl
-dnl LDFLAGS="$LDFLAGS $WX_LIBS"
-dnl ---------------------------------------------------------------------------
-
-dnl ---------------------------------------------------------------------------
-dnl WXRC_CHECK([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
-dnl
-dnl Test for wxWidgets' wxrc program for creating either C++, Python or XRS
-dnl resources. The variable WXRC will be set and substituted in the configure
-dnl script and Makefiles.
-dnl
-dnl Example use:
-dnl WXRC_CHECK([wxrc=1], [wxrc=0])
-dnl ---------------------------------------------------------------------------
-
-dnl
-dnl wxrc program from the wx-config script
-dnl
-AC_DEFUN([WXRC_CHECK],
-[
- AC_ARG_VAR([WXRC], [Path to wxWidget's wxrc resource compiler])
-
- if test "x$WX_CONFIG_NAME" = x; then
- AC_MSG_ERROR([The wxrc tests must run after wxWidgets test.])
- else
-
- AC_MSG_CHECKING([for wxrc])
-
- if test "x$WXRC" = x ; then
- dnl wx-config --utility is a new addition to wxWidgets:
- _WX_PRIVATE_CHECK_VERSION(2,5,3)
- if test -n "$wx_ver_ok"; then
- WXRC=`$WX_CONFIG_WITH_ARGS --utility=wxrc`
- fi
- fi
-
- if test "x$WXRC" = x ; then
- AC_MSG_RESULT([not found])
- ifelse([$2], , :, [$2])
- else
- AC_MSG_RESULT([$WXRC])
- ifelse([$1], , :, [$1])
- fi
-
- AC_SUBST(WXRC)
- fi
-])
-
-dnl ---------------------------------------------------------------------------
-dnl WX_LIKE_LIBNAME([output-var] [prefix], [name])
-dnl
-dnl Sets the "output-var" variable to the name of a library named with same
-dnl wxWidgets rule.
-dnl E.g. for output-var=='lib', name=='test', prefix='mine', sets
-dnl the $lib variable to:
-dnl 'mine_gtk2ud_test-2.8'
-dnl if WX_PORT=gtk2, WX_UNICODE=1, WX_DEBUG=1 and WX_RELEASE=28
-dnl ---------------------------------------------------------------------------
-AC_DEFUN([WX_LIKE_LIBNAME],
- [
- wx_temp="$2""_""$WX_PORT"
-
- dnl add the [u][d] string
- if test "$WX_UNICODE" = "1"; then
- wx_temp="$wx_temp""u"
- fi
- if test "$WX_DEBUG" = "1"; then
- wx_temp="$wx_temp""d"
- fi
-
- dnl complete the name of the lib
- wx_temp="$wx_temp""_""$3""-$WX_VERSION_MAJOR.$WX_VERSION_MINOR"
-
- dnl save it in the user's variable
- $1=$wx_temp
- ])
-
-dnl ---------------------------------------------------------------------------
-dnl WX_ARG_ENABLE_YESNOAUTO/WX_ARG_WITH_YESNOAUTO
-dnl
-dnl Two little custom macros which define the ENABLE/WITH configure arguments.
-dnl Macro arguments:
-dnl $1 = the name of the --enable / --with feature
-dnl $2 = the name of the variable associated
-dnl $3 = the description of that feature
-dnl $4 = the default value for that feature
-dnl $5 = additional action to do in case option is given with "yes" value
-dnl ---------------------------------------------------------------------------
-AC_DEFUN([WX_ARG_ENABLE_YESNOAUTO],
- [AC_ARG_ENABLE($1,
- AC_HELP_STRING([--enable-$1], [$3 (default is $4)]),
- [], [enableval="$4"])
-
- dnl Show a message to the user about this option
- AC_MSG_CHECKING([for the --enable-$1 option])
- if test "$enableval" = "yes" ; then
- AC_MSG_RESULT([yes])
- $2=1
- $5
- elif test "$enableval" = "no" ; then
- AC_MSG_RESULT([no])
- $2=0
- elif test "$enableval" = "auto" ; then
- AC_MSG_RESULT([will be automatically detected])
- $2="auto"
- else
- AC_MSG_ERROR([
- Unrecognized option value (allowed values: yes, no, auto)
- ])
- fi
- ])
-
-AC_DEFUN([WX_ARG_WITH_YESNOAUTO],
- [AC_ARG_WITH($1,
- AC_HELP_STRING([--with-$1], [$3 (default is $4)]),
- [], [withval="$4"])
-
- dnl Show a message to the user about this option
- AC_MSG_CHECKING([for the --with-$1 option])
- if test "$withval" = "yes" ; then
- AC_MSG_RESULT([yes])
- $2=1
- $5
- dnl NB: by default we don't allow --with-$1=no option
- dnl since it does not make much sense !
- elif test "$6" = "1" -a "$withval" = "no" ; then
- AC_MSG_RESULT([no])
- $2=0
- elif test "$withval" = "auto" ; then
- AC_MSG_RESULT([will be automatically detected])
- $2="auto"
- else
- AC_MSG_ERROR([
- Unrecognized option value (allowed values: yes, auto)
- ])
- fi
- ])
-
-
-dnl ---------------------------------------------------------------------------
-dnl WX_STANDARD_OPTIONS([options-to-add])
-dnl
-dnl Adds to the configure script one or more of the following options:
-dnl --enable-[debug|unicode|shared|wxshared|wxdebug]
-dnl --with-[gtk|msw|motif|x11|mac|dfb]
-dnl --with-wxversion
-dnl Then checks for their presence and eventually set the DEBUG, UNICODE, SHARED,
-dnl PORT, WX_SHARED, WX_DEBUG, variables to one of the "yes", "no", "auto" values.
-dnl
-dnl Note that e.g. UNICODE != WX_UNICODE; the first is the value of the
-dnl --enable-unicode option (in boolean format) while the second indicates
-dnl if wxWidgets was built in Unicode mode (and still is in boolean format).
-dnl ---------------------------------------------------------------------------
-AC_DEFUN([WX_STANDARD_OPTIONS],
- [
-
- dnl the following lines will expand to WX_ARG_ENABLE_YESNOAUTO calls if and only if
- dnl the $1 argument contains respectively the debug,unicode or shared options.
-
- dnl be careful here not to set debug flag if only "wxdebug" was specified
- ifelse(regexp([$1], [\bdebug]), [-1],,
- [WX_ARG_ENABLE_YESNOAUTO([debug], [DEBUG], [Build in debug mode], [auto])])
-
- ifelse(index([$1], [unicode]), [-1],,
- [WX_ARG_ENABLE_YESNOAUTO([unicode], [UNICODE], [Build in Unicode mode], [auto])])
-
- ifelse(regexp([$1], [\bshared]), [-1],,
- [WX_ARG_ENABLE_YESNOAUTO([shared], [SHARED], [Build as shared library], [auto])])
-
- dnl WX_ARG_WITH_YESNOAUTO cannot be used for --with-toolkit since it's an option
- dnl which must be able to accept the auto|gtk1|gtk2|msw|... values
- ifelse(index([$1], [toolkit]), [-1],,
- [
- AC_ARG_WITH([toolkit],
- AC_HELP_STRING([--with-toolkit],
- [Build against a specific wxWidgets toolkit (default is auto)]),
- [], [withval="auto"])
-
- dnl Show a message to the user about this option
- AC_MSG_CHECKING([for the --with-toolkit option])
- if test "$withval" = "auto" ; then
- AC_MSG_RESULT([will be automatically detected])
- TOOLKIT="auto"
- else
- TOOLKIT="$withval"
-
- dnl PORT must be one of the allowed values
- if test "$TOOLKIT" != "gtk1" -a "$TOOLKIT" != "gtk2" -a \
- "$TOOLKIT" != "msw" -a "$TOOLKIT" != "motif" -a \
- "$TOOLKIT" != "osx_carbon" -a "$TOOLKIT" != "osx_cocoa" -a \
- "$TOOLKIT" != "dfb" -a "$TOOLKIT" != "x11"; then
- AC_MSG_ERROR([
- Unrecognized option value (allowed values: auto, gtk1, gtk2, msw, motif, osx_carbon, osx_cocoa, dfb, x11)
- ])
- fi
-
- AC_MSG_RESULT([$TOOLKIT])
- fi
- ])
-
- dnl ****** IMPORTANT *******
- dnl Unlike for the UNICODE setting, you can build your program in
- dnl shared mode against a static build of wxWidgets. Thus we have the
- dnl following option which allows these mixtures. E.g.
- dnl
- dnl ./configure --disable-shared --with-wxshared
- dnl
- dnl will build your library in static mode against the first available
- dnl shared build of wxWidgets.
- dnl
- dnl Note that's not possible to do the viceversa:
- dnl
- dnl ./configure --enable-shared --without-wxshared
- dnl
- dnl Doing so you would try to build your library in shared mode against a static
- dnl build of wxWidgets. This is not possible (you would mix PIC and non PIC code) !
- dnl A check for this combination of options is in WX_DETECT_STANDARD_OPTION_VALUES
- dnl (where we know what 'auto' should be expanded to).
- dnl
- dnl If you try to build something in ANSI mode against a UNICODE build
- dnl of wxWidgets or in RELEASE mode against a DEBUG build of wxWidgets,
- dnl then at best you'll get ton of linking errors !
- dnl ************************
-
- ifelse(index([$1], [wxshared]), [-1],,
- [
- WX_ARG_WITH_YESNOAUTO(
- [wxshared], [WX_SHARED],
- [Force building against a shared build of wxWidgets, even if --disable-shared is given],
- [auto], [], [1])
- ])
-
- dnl Just like for SHARED and WX_SHARED it may happen that some adventurous
- dnl peoples will want to mix a wxWidgets release build with a debug build of
- dnl his app/lib. So, we have both DEBUG and WX_DEBUG variables.
- ifelse(index([$1], [wxdebug]), [-1],,
- [
- WX_ARG_WITH_YESNOAUTO(
- [wxdebug], [WX_DEBUG],
- [Force building against a debug build of wxWidgets, even if --disable-debug is given],
- [auto], [], [1])
- ])
-
- dnl WX_ARG_WITH_YESNOAUTO cannot be used for --with-wxversion since it's an option
- dnl which accepts the "auto|2.6|2.7|2.8|2.9|3.0" etc etc values
- ifelse(index([$1], [wxversion]), [-1],,
- [
- AC_ARG_WITH([wxversion],
- AC_HELP_STRING([--with-wxversion],
- [Build against a specific version of wxWidgets (default is auto)]),
- [], [withval="auto"])
-
- dnl Show a message to the user about this option
- AC_MSG_CHECKING([for the --with-wxversion option])
- if test "$withval" = "auto" ; then
- AC_MSG_RESULT([will be automatically detected])
- WX_RELEASE="auto"
- else
-
- wx_requested_major_version=`echo $withval | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).*/\1/'`
- wx_requested_minor_version=`echo $withval | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).*/\2/'`
-
- dnl both vars above must be exactly 1 digit
- if test "${#wx_requested_major_version}" != "1" -o \
- "${#wx_requested_minor_version}" != "1" ; then
- AC_MSG_ERROR([
- Unrecognized option value (allowed values: auto, 2.6, 2.7, 2.8, 2.9, 3.0)
- ])
- fi
-
- WX_RELEASE="$wx_requested_major_version"".""$wx_requested_minor_version"
- AC_MSG_RESULT([$WX_RELEASE])
- fi
- ])
-
- if test "$WX_DEBUG_CONFIGURE" = "1"; then
- echo "[[dbg]] DEBUG: $DEBUG, WX_DEBUG: $WX_DEBUG"
- echo "[[dbg]] UNICODE: $UNICODE, WX_UNICODE: $WX_UNICODE"
- echo "[[dbg]] SHARED: $SHARED, WX_SHARED: $WX_SHARED"
- echo "[[dbg]] TOOLKIT: $TOOLKIT, WX_TOOLKIT: $WX_TOOLKIT"
- echo "[[dbg]] VERSION: $VERSION, WX_RELEASE: $WX_RELEASE"
- fi
- ])
-
-
-dnl ---------------------------------------------------------------------------
-dnl WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS
-dnl
-dnl Sets the WXCONFIG_FLAGS string using the SHARED,DEBUG,UNICODE variable values
-dnl which are different from "auto".
-dnl Thus this macro needs to be called only once all options have been set.
-dnl ---------------------------------------------------------------------------
-AC_DEFUN([WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS],
- [
- if test "$WX_SHARED" = "1" ; then
- WXCONFIG_FLAGS="--static=no "
- elif test "$WX_SHARED" = "0" ; then
- WXCONFIG_FLAGS="--static=yes "
- fi
-
- if test "$WX_DEBUG" = "1" ; then
- WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--debug=yes "
- elif test "$WX_DEBUG" = "0" ; then
- WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--debug=no "
- fi
-
- dnl The user should have set WX_UNICODE=UNICODE
- if test "$WX_UNICODE" = "1" ; then
- WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--unicode=yes "
- elif test "$WX_UNICODE" = "0" ; then
- WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--unicode=no "
- fi
-
- if test "$TOOLKIT" != "auto" ; then
- WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--toolkit=$TOOLKIT "
- fi
-
- if test "$WX_RELEASE" != "auto" ; then
- WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--version=$WX_RELEASE "
- fi
-
- dnl strip out the last space of the string
- WXCONFIG_FLAGS=${WXCONFIG_FLAGS% }
-
- if test "$WX_DEBUG_CONFIGURE" = "1"; then
- echo "[[dbg]] WXCONFIG_FLAGS: $WXCONFIG_FLAGS"
- fi
- ])
-
-
-dnl ---------------------------------------------------------------------------
-dnl _WX_SELECTEDCONFIG_CHECKFOR([RESULTVAR], [STRING], [MSG]
-dnl [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
-dnl
-dnl Outputs the given MSG. Then searches the given STRING in the wxWidgets
-dnl additional CPP flags and put the result of the search in WX_$RESULTVAR
-dnl also adding the "yes" or "no" message result to MSG.
-dnl ---------------------------------------------------------------------------
-AC_DEFUN([_WX_SELECTEDCONFIG_CHECKFOR],
- [
- if test "$$1" = "auto" ; then
-
- dnl The user does not have particular preferences for this option;
- dnl so we will detect the wxWidgets relative build setting and use it
- AC_MSG_CHECKING([$3])
-
- dnl set WX_$1 variable to 1 if the $WX_SELECTEDCONFIG contains the $2
- dnl string or to 0 otherwise.
- dnl NOTE: 'expr match STRING REGEXP' cannot be used since on Mac it
- dnl doesn't work; we use 'expr STRING : REGEXP' instead
- WX_$1=$(expr "$WX_SELECTEDCONFIG" : ".*$2.*")
-
- if test "$WX_$1" != "0"; then
- WX_$1=1
- AC_MSG_RESULT([yes])
- ifelse([$4], , :, [$4])
- else
- WX_$1=0
- AC_MSG_RESULT([no])
- ifelse([$5], , :, [$5])
- fi
- else
-
- dnl Use the setting given by the user
- WX_$1=$$1
- fi
- ])
-
-dnl ---------------------------------------------------------------------------
-dnl WX_DETECT_STANDARD_OPTION_VALUES
-dnl
-dnl Detects the values of the following variables:
-dnl 1) WX_RELEASE
-dnl 2) WX_UNICODE
-dnl 3) WX_DEBUG
-dnl 4) WX_SHARED (and also WX_STATIC)
-dnl 5) WX_PORT
-dnl from the previously selected wxWidgets build; this macro in fact must be
-dnl called *after* calling the WX_CONFIG_CHECK macro.
-dnl
-dnl Note that the WX_VERSION_MAJOR, WX_VERSION_MINOR symbols are already set
-dnl by WX_CONFIG_CHECK macro
-dnl ---------------------------------------------------------------------------
-AC_DEFUN([WX_DETECT_STANDARD_OPTION_VALUES],
- [
- dnl IMPORTANT: WX_VERSION contains all three major.minor.micro digits,
- dnl while WX_RELEASE only the major.minor ones.
- WX_RELEASE="$WX_VERSION_MAJOR""$WX_VERSION_MINOR"
- if test $WX_RELEASE -lt 26 ; then
-
- AC_MSG_ERROR([
- Cannot detect the wxWidgets configuration for the selected wxWidgets build
- since its version is $WX_VERSION < 2.6.0; please install a newer
- version of wxWidgets.
- ])
- fi
-
- dnl The wx-config we are using understands the "--selected_config"
- dnl option which returns an easy-parseable string !
- WX_SELECTEDCONFIG=$($WX_CONFIG_WITH_ARGS --selected_config)
-
- if test "$WX_DEBUG_CONFIGURE" = "1"; then
- echo "[[dbg]] Using wx-config --selected-config"
- echo "[[dbg]] WX_SELECTEDCONFIG: $WX_SELECTEDCONFIG"
- fi
-
-
- dnl we could test directly for WX_SHARED with a line like:
- dnl _WX_SELECTEDCONFIG_CHECKFOR([SHARED], [shared],
- dnl [if wxWidgets was built in SHARED mode])
- dnl but wx-config --selected-config DOES NOT outputs the 'shared'
- dnl word when wx was built in shared mode; it rather outputs the
- dnl 'static' word when built in static mode.
- if test $WX_SHARED = "1"; then
- STATIC=0
- elif test $WX_SHARED = "0"; then
- STATIC=1
- elif test $WX_SHARED = "auto"; then
- STATIC="auto"
- fi
-
- dnl Now set the WX_UNICODE, WX_DEBUG, WX_STATIC variables
- _WX_SELECTEDCONFIG_CHECKFOR([UNICODE], [unicode],
- [if wxWidgets was built with UNICODE enabled])
- _WX_SELECTEDCONFIG_CHECKFOR([DEBUG], [debug],
- [if wxWidgets was built in DEBUG mode])
- _WX_SELECTEDCONFIG_CHECKFOR([STATIC], [static],
- [if wxWidgets was built in STATIC mode])
-
- dnl init WX_SHARED from WX_STATIC
- if test "$WX_STATIC" != "0"; then
- WX_SHARED=0
- else
- WX_SHARED=1
- fi
-
- AC_SUBST(WX_UNICODE)
- AC_SUBST(WX_DEBUG)
- AC_SUBST(WX_SHARED)
-
- dnl detect the WX_PORT to use
- if test "$TOOLKIT" = "auto" ; then
-
- dnl The user does not have particular preferences for this option;
- dnl so we will detect the wxWidgets relative build setting and use it
- AC_MSG_CHECKING([which wxWidgets toolkit was selected])
-
- WX_GTKPORT1=$(expr "$WX_SELECTEDCONFIG" : ".*gtk1.*")
- WX_GTKPORT2=$(expr "$WX_SELECTEDCONFIG" : ".*gtk2.*")
- WX_MSWPORT=$(expr "$WX_SELECTEDCONFIG" : ".*msw.*")
- WX_MOTIFPORT=$(expr "$WX_SELECTEDCONFIG" : ".*motif.*")
- WX_OSXCOCOAPORT=$(expr "$WX_SELECTEDCONFIG" : ".*osx_cocoa.*")
- WX_OSXCARBONPORT=$(expr "$WX_SELECTEDCONFIG" : ".*osx_carbon.*")
- WX_X11PORT=$(expr "$WX_SELECTEDCONFIG" : ".*x11.*")
- WX_DFBPORT=$(expr "$WX_SELECTEDCONFIG" : ".*dfb.*")
-
- WX_PORT="unknown"
- if test "$WX_GTKPORT1" != "0"; then WX_PORT="gtk1"; fi
- if test "$WX_GTKPORT2" != "0"; then WX_PORT="gtk2"; fi
- if test "$WX_MSWPORT" != "0"; then WX_PORT="msw"; fi
- if test "$WX_MOTIFPORT" != "0"; then WX_PORT="motif"; fi
- if test "$WX_OSXCOCOAPORT" != "0"; then WX_PORT="osx_cocoa"; fi
- if test "$WX_OSXCARBONPORT" != "0"; then WX_PORT="osx_carbon"; fi
- if test "$WX_X11PORT" != "0"; then WX_PORT="x11"; fi
- if test "$WX_DFBPORT" != "0"; then WX_PORT="dfb"; fi
-
- dnl NOTE: backward-compatible check for wx2.8; in wx2.9 the mac
- dnl ports are called 'osx_cocoa' and 'osx_carbon' (see above)
- WX_MACPORT=$(expr "$WX_SELECTEDCONFIG" : ".*mac.*")
- if test "$WX_MACPORT" != "0"; then WX_PORT="mac"; fi
-
- dnl check at least one of the WX_*PORT has been set !
-
- if test "$WX_PORT" = "unknown" ; then
- AC_MSG_ERROR([
- Cannot detect the currently installed wxWidgets port !
- Please check your 'wx-config --cxxflags'...
- ])
- fi
-
- AC_MSG_RESULT([$WX_PORT])
- else
-
- dnl Use the setting given by the user
- if test -z "$TOOLKIT" ; then
- WX_PORT=$TOOLKIT
- else
- dnl try with PORT
- WX_PORT=$PORT
- fi
- fi
-
- AC_SUBST(WX_PORT)
-
- if test "$WX_DEBUG_CONFIGURE" = "1"; then
- echo "[[dbg]] Values of all WX_* options after final detection:"
- echo "[[dbg]] WX_DEBUG: $WX_DEBUG"
- echo "[[dbg]] WX_UNICODE: $WX_UNICODE"
- echo "[[dbg]] WX_SHARED: $WX_SHARED"
- echo "[[dbg]] WX_RELEASE: $WX_RELEASE"
- echo "[[dbg]] WX_PORT: $WX_PORT"
- fi
-
- dnl Avoid problem described in the WX_STANDARD_OPTIONS which happens when
- dnl the user gives the options:
- dnl ./configure --enable-shared --without-wxshared
- dnl or just do
- dnl ./configure --enable-shared
- dnl but there is only a static build of wxWidgets available.
- if test "$WX_SHARED" = "0" -a "$SHARED" = "1"; then
- AC_MSG_ERROR([
- Cannot build shared library against a static build of wxWidgets !
- This error happens because the wxWidgets build which was selected
- has been detected as static while you asked to build $PACKAGE_NAME
- as shared library and this is not possible.
- Use the '--disable-shared' option to build $PACKAGE_NAME
- as static library or '--with-wxshared' to use wxWidgets as shared library.
- ])
- fi
-
- dnl now we can finally update the DEBUG,UNICODE,SHARED options
- dnl to their final values if they were set to 'auto'
- if test "$DEBUG" = "auto"; then
- DEBUG=$WX_DEBUG
- fi
- if test "$UNICODE" = "auto"; then
- UNICODE=$WX_UNICODE
- fi
- if test "$SHARED" = "auto"; then
- SHARED=$WX_SHARED
- fi
- if test "$TOOLKIT" = "auto"; then
- TOOLKIT=$WX_PORT
- fi
-
- dnl in case the user needs a BUILD=debug/release var...
- if test "$DEBUG" = "1"; then
- BUILD="debug"
- elif test "$DEBUG" = "0" -o "$DEBUG" = ""; then
- BUILD="release"
- fi
-
- dnl respect the DEBUG variable adding the optimize/debug flags
- dnl NOTE: the CXXFLAGS are merged together with the CPPFLAGS so we
- dnl don't need to set them, too
- if test "$DEBUG" = "1"; then
- CXXFLAGS="$CXXFLAGS -g -O0"
- CFLAGS="$CFLAGS -g -O0"
- else
- CXXFLAGS="$CXXFLAGS -O2"
- CFLAGS="$CFLAGS -O2"
- fi
- ])
-
-dnl ---------------------------------------------------------------------------
-dnl WX_BOOLOPT_SUMMARY([name of the boolean variable to show summary for],
-dnl [what to print when var is 1],
-dnl [what to print when var is 0])
-dnl
-dnl Prints $2 when variable $1 == 1 and prints $3 when variable $1 == 0.
-dnl This macro mainly exists just to make configure.ac scripts more readable.
-dnl
-dnl NOTE: you need to use the [" my message"] syntax for 2nd and 3rd arguments
-dnl if you want that m4 avoid to throw away the spaces prefixed to the
-dnl argument value.
-dnl ---------------------------------------------------------------------------
-AC_DEFUN([WX_BOOLOPT_SUMMARY],
- [
- if test "x$$1" = "x1" ; then
- echo $2
- elif test "x$$1" = "x0" ; then
- echo $3
- else
- echo "$1 is $$1"
- fi
- ])
-
-dnl ---------------------------------------------------------------------------
-dnl WX_STANDARD_OPTIONS_SUMMARY_MSG
-dnl
-dnl Shows a summary message to the user about the WX_* variable contents.
-dnl This macro is used typically at the end of the configure script.
-dnl ---------------------------------------------------------------------------
-AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG],
- [
- echo
- echo " The wxWidgets build which will be used by $PACKAGE_NAME $PACKAGE_VERSION"
- echo " has the following settings:"
- WX_BOOLOPT_SUMMARY([WX_DEBUG], [" - DEBUG build"], [" - RELEASE build"])
- WX_BOOLOPT_SUMMARY([WX_UNICODE], [" - UNICODE mode"], [" - ANSI mode"])
- WX_BOOLOPT_SUMMARY([WX_SHARED], [" - SHARED mode"], [" - STATIC mode"])
- echo " - VERSION: $WX_VERSION"
- echo " - PORT: $WX_PORT"
- ])
-
-
-dnl ---------------------------------------------------------------------------
-dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN, WX_STANDARD_OPTIONS_SUMMARY_MSG_END
-dnl
-dnl Like WX_STANDARD_OPTIONS_SUMMARY_MSG macro but these two macros also gives info
-dnl about the configuration of the package which used the wxpresets.
-dnl
-dnl Typical usage:
-dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN
-dnl echo " - Package setting 1: $SETTING1"
-dnl echo " - Package setting 2: $SETTING1"
-dnl ...
-dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_END
-dnl
-dnl ---------------------------------------------------------------------------
-AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN],
- [
- echo
- echo " ----------------------------------------------------------------"
- echo " Configuration for $PACKAGE_NAME $PACKAGE_VERSION successfully completed."
- echo " Summary of main configuration settings for $PACKAGE_NAME:"
- WX_BOOLOPT_SUMMARY([DEBUG], [" - DEBUG build"], [" - RELEASE build"])
- WX_BOOLOPT_SUMMARY([UNICODE], [" - UNICODE mode"], [" - ANSI mode"])
- WX_BOOLOPT_SUMMARY([SHARED], [" - SHARED mode"], [" - STATIC mode"])
- ])
-
-AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG_END],
- [
- WX_STANDARD_OPTIONS_SUMMARY_MSG
- echo
- echo " Now, just run make."
- echo " ----------------------------------------------------------------"
- echo
- ])
-
-
-dnl ---------------------------------------------------------------------------
-dnl Deprecated macro wrappers
-dnl ---------------------------------------------------------------------------
-
-AC_DEFUN([AM_OPTIONS_WXCONFIG], [WX_CONFIG_OPTIONS])
-AC_DEFUN([AM_PATH_WXCONFIG], [
- WX_CONFIG_CHECK([$1],[$2],[$3],[$4],[$5])
-])
-AC_DEFUN([AM_PATH_WXRC], [WXRC_CHECK([$1],[$2])])
-
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software
-# Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.11'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.11.6], [],
- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too. Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.6])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 9
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009,
-# 2010, 2011 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 12
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
- [$1], CXX, [depcc="$CXX" am_compiler_list=],
- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], UPC, [depcc="$UPC" am_compiler_list=],
- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- am__universal=false
- m4_case([$1], [CC],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac],
- [CXX],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac])
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok `-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[ --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
- am__nodep='_no'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-AC_SUBST([am__nodep])dnl
-_AM_SUBST_NOTMAKE([am__nodep])dnl
-])
-
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 5
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 16
-
-# This macro actually does too much. Some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out. PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition. After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
-dnl Autoconf wants to disallow AM_ names. We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES(OBJC)],
- [define([AC_PROG_OBJC],
- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
-])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
- [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
-
-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation,
-# Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot. For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Check to see how 'make' treats includes. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation,
-# Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
- [[\\/$]]* | ?:[[\\/]]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
-# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software
-# Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# --------------------
-# Set option NAME. Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[[\\\"\#\$\&\'\`$am_lf]]*)
- AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
- *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
- AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
-esac
-
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- rm -f conftest.file
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
-
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
- AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# --------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball. -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005, 2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-# tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-# $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility. Yes, it's still used
-# in the wild :-( We should find a proper way to deprecate it ...
-AC_SUBST([AMTAR], ['$${TAR-tar}'])
-m4_if([$1], [v7],
- [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
-
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
-
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
projects / freetel-svn-tracking.git / commitdiff