Started implementing change-log items 34-41

RGB 09/15/15

git-svn-id: https://svn.code.sf.net/p/freetel/code@2331 01035d8c-6547-0410-b346-abe4f91aad63

diff --git a/smartmic/SM1000-F/DIL16x300.png b/smartmic/SM1000-F/DIL16x300.png
new file mode 100644 (file)
index 0000000..7138e0d
Binary files /dev/null and b/smartmic/SM1000-F/DIL16x300.png differ

diff --git a/smartmic/SM1000-F/PCB Documentation Check List.docx b/smartmic/SM1000-F/PCB Documentation Check List.docx
new file mode 100644 (file)
index 0000000..fd2db0a
Binary files /dev/null and b/smartmic/SM1000-F/PCB Documentation Check List.docx differ

diff --git a/smartmic/SM1000-F/SM1000-F-change-log.txt b/smartmic/SM1000-F/SM1000-F-change-log.txt
index 5ab6a1562acb819a027cddfa71d7c3caac0b78c0..9b96217ff708d84a4f95212fe9e75b3b89207f8e 100644 (file)
--- a/smartmic/SM1000-F/SM1000-F-change-log.txt
+++ b/smartmic/SM1000-F/SM1000-F-change-log.txt
@@ -1,5 +1,5 @@
 SM1000-E-CHANGE-LOG.TXT\r
-03/30/15 RGB\r
+09/15/15 RGB\r
 \r
 1.  [X]        R       Change PTT sw. to e-switch LC2259OANP.\r
 \r
@@ -116,21 +116,29 @@ SM1000-E-CHANGE-LOG.TXT
                Library & .brd updated. RGB\r
 \r
 \r
-Rev F Ideas\r
+Rev F Changes\r
 -----------\r
 \r
-34 [ ] jumper with series R for mic gain\r
+34 [X] jumper with series R for mic gain\r
+          Will add jmpr and 1/4W 330 Ohm res in parallel with R48.\r
 \r
-35 [ ] consider combining grounds on patch panel as they usually are\r
+35 [X] consider combining grounds on patch panel as they usually are\r
+          Will disconnect CN13-12 from RF-MIC(MIC_GND) and connect to CN12-13 RF_PTT(PTT_GND). More flexibility.\r
 \r
-36 [ ] do all gain pots increase gain when turned CW\r
+36 [X] do all gain pots increase gain when turned CW. \r
+          Mic GAin reversed fixed in 37 below.\r
 \r
-37 [ ] mic gain is wront way around\r
+37 [X] mic gain is wront way around. \r
+          Switched ends of POT to fix direction, increaasing CW.\r
 \r
-38 [ ] increasing arrow on trimmer pot case overlay showing increase direction\r
+38 [X] increasing arrow on trimmer pot case overlay showing increase direction\r
+          Edwin will arrange with enclosure manufacturer.\r
 \r
-39 [ ] http://rfhead.net/?p=582\r
+39 [X] http://rfhead.net/?p=582\r
+          Will add pads to implement this. Will be User change & responsibility.\r
 \r
-40 [ ] larger patch panel?\r
+40 [X] larger patch panel?\r
+         Replacing CN12 with 16pin DIL turret post socket.\r
 \r
-41 [ ] 0805 R48 gain resistors?\r
+41 [X] 0805 R48 gain resistors?\r
+       replace R48 package with 1206 package.\r

diff --git a/smartmic/SM1000-F/SM1000-F.brd b/smartmic/SM1000-F/SM1000-F.brd
index 2b6e63c8e9ff0e3af1d31733a350759a02ada917..835298ff599e6663023f520f3966841994f9fd05 100644 (file)
--- a/smartmic/SM1000-F/SM1000-F.brd
+++ b/smartmic/SM1000-F/SM1000-F.brd
@@ -9,7 +9,7 @@
 <grid distance="0.5" unitdist="mm" unit="mm" style="dots" multiple="1" display="yes" altdistance="0.1" altunitdist="mm" altunit="mm"/>
 <layers>
 <layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
-<layer number="2" name="GND" color="3" fill="1" visible="yes" active="yes"/>
+<layer number="2" name="GND" color="3" fill="1" visible="no" active="yes"/>
 <layer number="3" name="Route3" color="4" fill="3" visible="no" active="no"/>
 <layer number="4" name="Route4" color="1" fill="4" visible="no" active="no"/>
 <layer number="5" name="Route5" color="4" fill="4" visible="no" active="no"/>
@@ -22,32 +22,32 @@
 <layer number="12" name="Route12" color="1" fill="5" visible="no" active="no"/>
 <layer number="13" name="Route13" color="4" fill="5" visible="no" active="no"/>
 <layer number="14" name="Route14" color="1" fill="6" visible="no" active="no"/>
-<layer number="15" name="VDD" color="6" fill="1" visible="yes" active="yes"/>
-<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
+<layer number="15" name="VDD" color="6" fill="1" visible="no" active="yes"/>
+<layer number="16" name="Bottom" color="1" fill="1" visible="no" active="yes"/>
 <layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="19" name="Unrouted" color="6" fill="1" visible="no" active="yes"/>
-<layer number="20" name="Dimension" color="15" fill="1" visible="no" active="yes"/>
+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="22" name="bPlace" color="7" fill="1" visible="no" active="yes"/>
 <layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
-<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="24" name="bOrigins" color="15" fill="1" visible="no" active="yes"/>
 <layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="26" name="bNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="27" name="tValues" color="7" fill="1" visible="no" active="yes"/>
 <layer number="28" name="bValues" color="7" fill="1" visible="no" active="yes"/>
-<layer number="29" name="tStop" color="7" fill="3" visible="yes" active="yes"/>
-<layer number="30" name="bStop" color="7" fill="6" visible="yes" active="yes"/>
-<layer number="31" name="tCream" color="7" fill="4" visible="yes" active="yes"/>
-<layer number="32" name="bCream" color="7" fill="5" visible="yes" active="yes"/>
+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
 <layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
 <layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
 <layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>
 <layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
 <layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
 <layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
-<layer number="39" name="tKeepout" color="4" fill="11" visible="yes" active="yes"/>
-<layer number="40" name="bKeepout" color="1" fill="11" visible="yes" active="yes"/>
+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>
+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>
 <layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>
 <layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>
 <layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>
@@ -101,9 +101,9 @@
 <layer number="130" name="SMDSTROOK" color="7" fill="1" visible="no" active="yes"/>
 <layer number="131" name="tAdjust" color="7" fill="1" visible="no" active="yes"/>
 <layer number="132" name="bAdjust" color="7" fill="1" visible="no" active="yes"/>
-<layer number="144" name="DrillLegend" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="145" name="DrillLegend_01-16" color="2" fill="9" visible="yes" active="yes"/>
-<layer number="146" name="DrillLegend_01-20" color="3" fill="9" visible="yes" active="yes"/>
+<layer number="144" name="DrillLegend" color="7" fill="1" visible="no" active="yes"/>
+<layer number="145" name="DrillLegend_01-16" color="2" fill="9" visible="no" active="yes"/>
+<layer number="146" name="DrillLegend_01-20" color="3" fill="9" visible="no" active="yes"/>
 <layer number="151" name="HeatSink" color="7" fill="1" visible="no" active="yes"/>
 <layer number="199" name="Contour" color="7" fill="1" visible="no" active="yes"/>
 <layer number="200" name="200bmp" color="1" fill="10" visible="no" active="no"/>
@@ -396,7 +396,7 @@ Licensed under TAPR Open Hardware License</text>
 <text x="31.5" y="-2" size="1.27" layer="2" font="vector" ratio="10">L2-GND</text>
 <text x="40.5" y="-2" size="1.27" layer="15" font="vector" ratio="10">L3-VDD-AVDD</text>
 <text x="54" y="-2" size="1.27" layer="16" font="vector" ratio="10">L4-BOTTOM</text>
-<text x="6" y="-2" size="1.27" layer="1" font="vector" ratio="10">01/16/15</text>
+<text x="6" y="-2" size="1.27" layer="1" font="vector" ratio="10">09/15/15</text>
 <text x="0.9" y="66.8" size="1.27" layer="21" ratio="10">PTT</text>
 <text x="1.5" y="77.5" size="1.27" layer="21" ratio="10">POWER</text>
 <text x="62.3" y="93.9" size="1.27" layer="21" ratio="10" rot="R90">SPKR</text>
@@ -1716,10 +1716,10 @@ INFINEON, www.infineon.com/cmc_upload/0/000/010/257/eh_db_5b.pdf</description>
 <circle x="-1.5" y="-2" radius="0.632453125" width="0.15" layer="51"/>
 </package>
 <package name="SOT23-6">
-<wire x1="-1.35" y1="-0.4" x2="-1.35" y2="0.4" width="0.125" layer="21"/>
-<wire x1="1.35" y1="-0.4" x2="1.35" y2="0.4" width="0.125" layer="21"/>
-<wire x1="-1.35" y1="0.4" x2="1.35" y2="0.4" width="0.125" layer="21"/>
-<wire x1="-1.35" y1="-0.4" x2="1.35" y2="-0.4" width="0.125" layer="21"/>
+<wire x1="-1.35" y1="-0.45" x2="-1.35" y2="0.45" width="0.125" layer="21"/>
+<wire x1="1.35" y1="-0.45" x2="1.35" y2="0.45" width="0.125" layer="21"/>
+<wire x1="-1.35" y1="0.45" x2="1.35" y2="0.45" width="0.125" layer="21"/>
+<wire x1="-1.35" y1="-0.45" x2="1.35" y2="-0.45" width="0.125" layer="21"/>
 <smd name="1" x="-0.95" y="-1.2" dx="1.2" dy="0.7" layer="1" rot="R90"/>
 <smd name="6" x="-0.95" y="1.2" dx="1.2" dy="0.7" layer="1" rot="R90"/>
 <smd name="5" x="0" y="1.2" dx="1.2" dy="0.7" layer="1" rot="R90"/>
@@ -1731,15 +1731,7 @@ INFINEON, www.infineon.com/cmc_upload/0/000/010/257/eh_db_5b.pdf</description>
 <wire x1="1.7" y1="2.2" x2="1.7" y2="-2.2" width="0" layer="39"/>
 <wire x1="1.7" y1="-2.2" x2="-1.7" y2="-2.2" width="0" layer="39"/>
 <wire x1="-1.7" y1="-2.2" x2="-1.7" y2="2.2" width="0" layer="39"/>
-<rectangle x1="-1.35" y1="-0.4" x2="-0.85" y2="0.1" layer="21"/>
-<wire x1="-1.4" y1="0.75" x2="1.45" y2="0.75" width="0.15" layer="52"/>
-<wire x1="1.45" y1="0.75" x2="1.45" y2="-0.75" width="0.15" layer="52"/>
-<wire x1="1.45" y1="-0.75" x2="-1.4" y2="-0.75" width="0.15" layer="52"/>
-<wire x1="-1.4" y1="-0.75" x2="-1.4" y2="0.75" width="0.15" layer="52"/>
-<wire x1="-1.4" y1="0.75" x2="1.45" y2="0.75" width="0.15" layer="51"/>
-<wire x1="1.45" y1="0.75" x2="1.45" y2="-0.75" width="0.15" layer="51"/>
-<wire x1="1.45" y1="-0.75" x2="-1.4" y2="-0.75" width="0.15" layer="51"/>
-<wire x1="-1.4" y1="-0.75" x2="-1.4" y2="0.75" width="0.15" layer="51"/>
+<rectangle x1="-1.4" y1="-0.5" x2="-0.9" y2="0" layer="21"/>
 </package>
 <package name="POT3361">
 <smd name="2" x="0" y="3.2" dx="3.3" dy="1.19" layer="1" rot="R90"/>
@@ -1819,11 +1811,6 @@ NS Package M08A</description>
 <rectangle x1="0.39" y1="2" x2="0.88" y2="3.1" layer="51"/>
 <rectangle x1="-0.88" y1="2" x2="-0.39" y2="3.1" layer="51"/>
 <rectangle x1="-2.15" y1="2" x2="-1.66" y2="3.1" layer="51"/>
-<wire x1="-2.5" y1="1" x2="2.5" y2="1" width="0.15" layer="21"/>
-<wire x1="2.5" y1="1" x2="2.5" y2="-1" width="0.15" layer="21"/>
-<wire x1="2.5" y1="-1" x2="-2.5" y2="-1" width="0.15" layer="21"/>
-<wire x1="-2.5" y1="-1" x2="-2.5" y2="1" width="0.15" layer="21"/>
-<circle x="-2" y="-0.5" radius="0.316225" width="0" layer="21"/>
 </package>
 <package name="SM-LP-5001">
 <smd name="1" x="-6.25" y="2.54" dx="2.5" dy="1.5" layer="1"/>
@@ -2421,6 +2408,39 @@ NS Package M08A</description>
 <wire x1="3.5" y1="-1.5" x2="-3.5" y2="-1.5" width="0" layer="39"/>
 <wire x1="-3.5" y1="-1.5" x2="-3.5" y2="1.5" width="0" layer="39"/>
 </package>
+<package name="DIL16X300">
+<pad name="1" x="-8.89" y="-3.81" drill="0.8" diameter="1.6764" shape="square" rot="R180"/>
+<pad name="2" x="-6.35" y="-3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="3" x="-3.81" y="-3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="4" x="-1.27" y="-3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="5" x="1.27" y="-3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="6" x="3.81" y="-3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="7" x="6.35" y="-3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="8" x="8.89" y="-3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="9" x="8.89" y="3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="10" x="6.35" y="3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="11" x="3.81" y="3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="12" x="1.27" y="3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="13" x="-1.27" y="3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="14" x="-3.81" y="3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="15" x="-6.35" y="3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="16" x="-8.89" y="3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<wire x1="-10.16" y1="-5.08" x2="-10.16" y2="-1.27" width="0.15" layer="21"/>
+<wire x1="-10.16" y1="1.27" x2="-10.16" y2="5.08" width="0.15" layer="21"/>
+<wire x1="-10.16" y1="5.08" x2="10.16" y2="5.08" width="0.15" layer="21"/>
+<wire x1="10.16" y1="5.08" x2="10.16" y2="-5.08" width="0.15" layer="21"/>
+<wire x1="10.16" y1="-5.08" x2="-10.16" y2="-5.08" width="0.15" layer="21"/>
+<wire x1="-10.16" y1="-1.27" x2="-10.16" y2="1.27" width="0.15" layer="21" curve="180"/>
+<wire x1="-10.16" y1="5.08" x2="10.16" y2="5.08" width="0" layer="39"/>
+<wire x1="10.16" y1="5.08" x2="10.16" y2="-5.08" width="0" layer="39"/>
+<wire x1="10.16" y1="-5.08" x2="-10.16" y2="-5.08" width="0" layer="39"/>
+<wire x1="-10.16" y1="-5.08" x2="-10.16" y2="5.08" width="0" layer="39"/>
+<text x="-8.89" y="-6.35" size="1" layer="21" ratio="10" rot="R90">1</text>
+<text x="10.16" y="-6.35" size="1" layer="21" ratio="10" rot="R90">8</text>
+<text x="10.16" y="5.588" size="1" layer="21" ratio="10" rot="R90">9</text>
+<text x="-9.144" y="5.334" size="1" layer="21" ratio="10" rot="R90">16</text>
+<text x="-10.5" y="-2" size="1" layer="25" ratio="10" rot="R90">&gt;NAME</text>
+</package>
 </packages>
 </library>
 <library name="_Coherix">
@@ -3538,7 +3558,7 @@ design rules under a new name.</description>
 <attribute name="NAME" x="43.9" y="46.5" size="1.27" layer="25" font="vector" ratio="10" rot="R90"/>
 </element>
 <element name="R53" library="AA-ipc-7351-resistor" package="RESC1005X40AN" value="2.2K,1%" x="55.5" y="47" locked="yes" smashed="yes" rot="R270">
-<attribute name="NAME" x="54.7" y="45.95" size="0.8128" layer="25" font="vector" rot="R90"/>
+<attribute name="NAME" x="54.7" y="45.75" size="0.8128" layer="25" font="vector" rot="R90"/>
 </element>
 <element name="C62" library="AA-ipc-7351-capacitor" package="CAPC1005X60N" value="100nF,25V" x="47.3" y="56.3" locked="yes" smashed="yes" rot="R270">
 <attribute name="NAME" x="48.8325" y="55.475" size="0.8128" layer="25" font="vector" ratio="10" rot="R90"/>
@@ -3855,6 +3875,7 @@ design rules under a new name.</description>
 <attribute name="VALUE" x="7.8" y="10.4" size="1" layer="28" font="vector" ratio="10" rot="MR270"/>
 </element>
 <element name="DRILEGEND" library="drilegend" package="DRILEGEND" value="" x="21.266053125" y="-12.15666875"/>
+<element name="CN13" library="_RoweTel" package="DIL16X300" value="DIL16X300" x="-11.5" y="26"/>
 </elements>
 <signals>
 <signal name="N$2">
@@ -5041,18 +5062,14 @@ design rules under a new name.</description>
 <contactref element="P4" pad="1"/>
 <via x="53.5" y="60" extent="1-16" drill="0.4" diameter="0.8"/>
 <via x="42" y="62" extent="1-16" drill="0.4" diameter="0.8"/>
-<wire x1="51.5" y1="49.5" x2="51.5" y2="56" width="0.2" layer="1"/>
+<wire x1="51.5" y1="54.5" x2="51.5" y2="56" width="0.2" layer="1"/>
 <wire x1="51.5" y1="56" x2="52" y2="56.5" width="0.2" layer="1"/>
-<wire x1="51.5" y1="49.5" x2="51.5" y2="48.5" width="0.2" layer="1"/>
-<via x="51.5" y="48.5" extent="1-16" drill="0.4" diameter="0.8"/>
+<via x="51.5" y="54.5" extent="1-16" drill="0.4" diameter="0.8"/>
 <wire x1="57.9" y1="47.5" x2="57.5" y2="47.5" width="0.2" layer="1"/>
 <via x="56.8" y="47.6" extent="1-16" drill="0.4" diameter="0.8"/>
 <wire x1="57.5" y1="47.5" x2="57.3" y2="47.5" width="0.2" layer="1"/>
 <wire x1="57.3" y1="47.5" x2="56.9" y2="47.5" width="0.2" layer="1"/>
 <wire x1="56.9" y1="47.5" x2="56.8" y2="47.6" width="0.2" layer="1"/>
-<wire x1="52" y1="48" x2="51.5" y2="48.5" width="0.2" layer="16"/>
-<wire x1="52" y1="48" x2="52.4" y2="47.6" width="0.2" layer="16"/>
-<wire x1="52.4" y1="47.6" x2="56.8" y2="47.6" width="0.2" layer="16"/>
 <wire x1="42" y1="62" x2="43.5" y2="60.5" width="0.2" layer="16"/>
 <wire x1="43.5" y1="60.5" x2="51.5" y2="60.5" width="0.2" layer="16"/>
 <wire x1="35.5" y1="68" x2="36" y2="68" width="0.2" layer="1"/>
@@ -5078,6 +5095,13 @@ design rules under a new name.</description>
 <wire x1="52" y1="58.5" x2="53.5" y2="60" width="0.2" layer="1"/>
 <wire x1="51.5" y1="60.5" x2="52" y2="60" width="0.2" layer="16"/>
 <wire x1="52" y1="60" x2="53.5" y2="60" width="0.2" layer="16"/>
+<wire x1="51.5" y1="54.5" x2="51.5" y2="52" width="0.2" layer="16"/>
+<wire x1="55.3" y1="48.5" x2="54.5" y2="49.3" width="0.2" layer="16"/>
+<wire x1="54.5" y1="49.3" x2="53" y2="49.3" width="0.2" layer="16"/>
+<wire x1="53" y1="49.3" x2="51.5" y2="50.8" width="0.2" layer="16"/>
+<wire x1="51.5" y1="50.8" x2="51.5" y2="52" width="0.2" layer="16"/>
+<wire x1="56.8" y1="47.6" x2="56.2" y2="47.6" width="0.2" layer="16"/>
+<wire x1="56.2" y1="47.6" x2="55.3" y2="48.5" width="0.2" layer="16"/>
 </signal>
 <signal name="DAC2_OUT">
 <contactref element="C37" pad="1"/>
@@ -5834,25 +5858,27 @@ design rules under a new name.</description>
 <wire x1="18.9" y1="20.6" x2="19" y2="20.5" width="0.25" layer="1"/>
 </signal>
 <signal name="N$41">
-<contactref element="R42" pad="1"/>
-<contactref element="R42" pad="2"/>
 <contactref element="R53" pad="2"/>
 <contactref element="C54" pad="1"/>
-<via x="54.5" y="49" extent="1-16" drill="0.4" diameter="0.8"/>
-<via x="45" y="49" extent="1-16" drill="0.4" diameter="0.8"/>
+<via x="54" y="48.5" extent="1-16" drill="0.4" diameter="0.8"/>
 <wire x1="55.5" y1="46.5" x2="55" y2="46.5" width="0.2" layer="1"/>
 <wire x1="55" y1="46.5" x2="54.05" y2="47.45" width="0.2" layer="1"/>
 <wire x1="54.05" y1="47.45" x2="53" y2="47.45" width="0.2" layer="1"/>
-<wire x1="54.5" y1="49" x2="54.5" y2="47.9" width="0.2" layer="1"/>
-<wire x1="54.5" y1="47.9" x2="54.05" y2="47.45" width="0.2" layer="1"/>
-<wire x1="54" y1="49.5" x2="54.5" y2="49" width="0.2" layer="16"/>
-<wire x1="44.96" y1="46.3" x2="45" y2="46.34" width="0.3" layer="1"/>
-<wire x1="45" y1="49" x2="45.5" y2="49.5" width="0.2" layer="16"/>
-<wire x1="45.5" y1="49.5" x2="54" y2="49.5" width="0.2" layer="16"/>
-<wire x1="47.5" y1="52.7" x2="47.5" y2="50.5" width="0.2" layer="1"/>
-<wire x1="47.5" y1="50.5" x2="46" y2="49" width="0.2" layer="1"/>
-<wire x1="46" y1="49" x2="45" y2="49" width="0.2" layer="1"/>
-<wire x1="45" y1="46.34" x2="45" y2="49" width="0.2" layer="1"/>
+<contactref element="R42" pad="3"/>
+<contactref element="R42" pad="2"/>
+<wire x1="47.5" y1="47.5" x2="48.5" y2="46.5" width="0.2" layer="1"/>
+<wire x1="48.5" y1="46.5" x2="48.7" y2="46.3" width="0.2" layer="1"/>
+<wire x1="48.7" y1="46.3" x2="50.04" y2="46.3" width="0.2" layer="1"/>
+<via x="47.5" y="49.5" extent="1-16" drill="0.4" diameter="0.8"/>
+<wire x1="47.5" y1="47.5" x2="47.5" y2="49.5" width="0.2" layer="1"/>
+<wire x1="47.5" y1="52.7" x2="47.5" y2="49.5" width="0.2" layer="1"/>
+<wire x1="52.3" y1="49.3" x2="48.5" y2="49.3" width="0.2" layer="16"/>
+<wire x1="48.5" y1="49.3" x2="47.7" y2="49.3" width="0.2" layer="16"/>
+<wire x1="47.7" y1="49.3" x2="47.5" y2="49.5" width="0.2" layer="16"/>
+<wire x1="54" y1="48.5" x2="54" y2="47.5" width="0.2" layer="1"/>
+<wire x1="54" y1="47.5" x2="54.05" y2="47.45" width="0.2" layer="1"/>
+<wire x1="54" y1="48.5" x2="53.1" y2="48.5" width="0.2" layer="16"/>
+<wire x1="53.1" y1="48.5" x2="52.3" y2="49.3" width="0.2" layer="16"/>
 </signal>
 <signal name="N$46">
 <contactref element="R38" pad="1"/>
@@ -6367,7 +6393,6 @@ design rules under a new name.</description>
 <wire x1="50" y1="58.03" x2="50" y2="56.3" width="0.25" layer="1"/>
 </signal>
 <signal name="N$27">
-<contactref element="R42" pad="3"/>
 <contactref element="U9" pad="4"/>
 <contactref element="R29" pad="2"/>
 <contactref element="C54" pad="2"/>
@@ -6378,17 +6403,22 @@ design rules under a new name.</description>
 <wire x1="56" y1="45.8" x2="56.8" y2="45.8" width="0.2" layer="1"/>
 <wire x1="56.8" y1="45.8" x2="57.5" y2="46.5" width="0.2" layer="1"/>
 <wire x1="57.5" y1="46.5" x2="57.9" y2="46.5" width="0.2" layer="1"/>
-<wire x1="52.9" y1="48.7" x2="53.05" y2="48.85" width="0.2" layer="1"/>
-<wire x1="53.05" y1="48.85" x2="53.05" y2="49.45" width="0.2" layer="1"/>
 <wire x1="53.5" y1="46.5" x2="53.45" y2="46.55" width="0.2" layer="1"/>
 <wire x1="53.45" y1="46.55" x2="53" y2="46.55" width="0.2" layer="1"/>
-<wire x1="50.04" y1="46.3" x2="51.3" y2="46.3" width="0.2" layer="1"/>
-<wire x1="51.3" y1="46.3" x2="51.5" y2="46.5" width="0.2" layer="1"/>
-<wire x1="51.5" y1="46.5" x2="51.55" y2="46.55" width="0.2" layer="1"/>
-<wire x1="51.55" y1="46.55" x2="52" y2="46.55" width="0.2" layer="1"/>
-<wire x1="52" y1="46.55" x2="53" y2="46.55" width="0.2" layer="1"/>
-<wire x1="52.9" y1="48.7" x2="52" y2="47.8" width="0.2" layer="1"/>
-<wire x1="52" y1="47.8" x2="52" y2="46.55" width="0.2" layer="1"/>
+<contactref element="R42" pad="1"/>
+<via x="52" y="48.5" extent="1-16" drill="0.4" diameter="0.8"/>
+<wire x1="52" y1="47.5" x2="52" y2="47" width="0.2" layer="1"/>
+<wire x1="52" y1="47" x2="52.45" y2="46.55" width="0.2" layer="1"/>
+<wire x1="52.45" y1="46.55" x2="53" y2="46.55" width="0.2" layer="1"/>
+<wire x1="53.05" y1="49.45" x2="53.05" y2="49.05" width="0.2" layer="1"/>
+<wire x1="53.05" y1="49.05" x2="52.5" y2="48.5" width="0.2" layer="1"/>
+<wire x1="52.5" y1="48.5" x2="52" y2="48.5" width="0.2" layer="1"/>
+<wire x1="52" y1="47.5" x2="52" y2="48.5" width="0.2" layer="1"/>
+<wire x1="52" y1="48.5" x2="45.5" y2="48.5" width="0.2" layer="16"/>
+<wire x1="45.5" y1="48.5" x2="45" y2="49" width="0.2" layer="16"/>
+<wire x1="44.96" y1="46.3" x2="44.96" y2="48.96" width="0.2" layer="1"/>
+<wire x1="44.96" y1="48.96" x2="45" y2="49" width="0.2" layer="1"/>
+<via x="45" y="49" extent="1-16" drill="0.4" diameter="0.8"/>
 </signal>
 <signal name="N$29">
 <contactref element="J3" pad="1"/>
@@ -6830,6 +6860,28 @@ design rules under a new name.</description>
 <approved hash="18,30,940c8111f43e9246"/>
 <approved hash="18,30,abfbf57f6710e618"/>
 <approved hash="19,16,e3b9547f5be2ec24"/>
+<approved hash="18,29,3b305319f2ef2864"/>
+<approved hash="18,29,5fe8205ba05bdfe8"/>
+<approved hash="18,29,fe49c2c52c050f89"/>
+<approved hash="18,29,6cd9576e62b18b8d"/>
+<approved hash="18,29,73463fbc934f9073"/>
+<approved hash="18,29,00cb2dbcdd6a0e55"/>
+<approved hash="18,29,2b01d3f0d08c244d"/>
+<approved hash="18,29,c0eda547d4260489"/>
+<approved hash="18,29,a76301ad5be03c25"/>
+<approved hash="18,29,5f126a9c781b227a"/>
+<approved hash="18,29,f78014e28d644e44"/>
+<approved hash="18,29,2a1282d2a879813f"/>
+<approved hash="18,29,7cc74979301ffd0b"/>
+<approved hash="18,29,a9ed9f25ea122242"/>
+<approved hash="18,29,1e2a4749934c9045"/>
+<approved hash="18,29,3bdba896abd5388a"/>
+<approved hash="18,30,3e5ec714cfd13e98"/>
+<approved hash="7,40,8b0d45f1ff0ccfff"/>
+<approved hash="7,40,9deb45fdff00d915"/>
+<approved hash="7,40,ef15ed17ed17ef15"/>
+<approved hash="7,40,715c0ea3f2a38d5c"/>
+<approved hash="7,40,03f07c0f800ffff0"/>
 <approved hash="3,1,d6d2fe2301e52914"/>
 <approved hash="3,1,1216e3c29f3b6eef"/>
 <approved hash="3,2,00ea953ee9177cc3"/>
@@ -6849,40 +6901,18 @@ design rules under a new name.</description>
 <approved hash="7,39,6771fcf2fcf1ed90"/>
 <approved hash="7,39,9971fef3fcf19dbe"/>
 <approved hash="7,39,8cd38ed18ed18cd3"/>
-<approved hash="7,40,8b0d45f1ff0ccfff"/>
-<approved hash="7,40,9deb45fdff00d915"/>
-<approved hash="7,40,ef15ed17ed17ef15"/>
-<approved hash="7,40,715c0ea3f2a38d5c"/>
-<approved hash="7,40,03f07c0f800ffff0"/>
-<approved hash="18,29,3b305319f2ef2864"/>
-<approved hash="18,29,5fe8205ba05bdfe8"/>
-<approved hash="18,29,fe49c2c52c050f89"/>
-<approved hash="18,29,6cd9576e62b18b8d"/>
-<approved hash="18,29,73463fbc934f9073"/>
-<approved hash="18,29,00cb2dbcdd6a0e55"/>
-<approved hash="18,29,2b01d3f0d08c244d"/>
-<approved hash="18,29,c0eda547d4260489"/>
-<approved hash="18,29,a76301ad5be03c25"/>
-<approved hash="18,29,5f126a9c781b227a"/>
-<approved hash="18,29,f78014e28d644e44"/>
-<approved hash="18,29,2a1282d2a879813f"/>
-<approved hash="18,29,7cc74979301ffd0b"/>
-<approved hash="18,29,a9ed9f25ea122242"/>
-<approved hash="18,29,1e2a4749934c9045"/>
-<approved hash="18,29,3bdba896abd5388a"/>
-<approved hash="18,30,3e5ec714cfd13e98"/>
 <approved hash="4,1,5c780c094c023c72"/>
 <approved hash="4,1,6a12da639e6f5628"/>
 <approved hash="4,1,a07cf5171c84a93f"/>
 <approved hash="4,1,aafc6979f558285c"/>
-<approved hash="4,1,d0424df5a8fd15c6"/>
 <approved hash="4,1,13fa1600be882257"/>
+<approved hash="4,1,d0424df5a8fd15c6"/>
 <approved hash="19,1,7443245b2047705f"/>
 <approved hash="19,1,7603261b2227723f"/>
 <approved hash="19,1,7661267924397421"/>
 <approved hash="19,1,725b2e432a5b7643"/>
-<approved hash="19,1,70792c612e25723d"/>
 <approved hash="19,1,7d05211d29217539"/>
+<approved hash="19,1,70792c612e25723d"/>
 <approved hash="4,2,cc7043b83e2af1e3"/>
 <approved hash="4,2,121691de6c4a3780"/>
 <approved hash="4,15,cc7043b83e2af1e3"/>

diff --git a/smartmic/SM1000-F/SM1000-F.sch b/smartmic/SM1000-F/SM1000-F.sch
index 043ef4195be8d7dcf98abba478ac1db495fcf454..beed9563b96c531559fc051f18b29e3db0c7fab5 100644 (file)
--- a/smartmic/SM1000-F/SM1000-F.sch
+++ b/smartmic/SM1000-F/SM1000-F.sch
@@ -416,10 +416,10 @@ INFINEON, www.infineon.com/cmc_upload/0/000/010/257/eh_db_5b.pdf</description>
 <circle x="-1.5" y="-2" radius="0.632453125" width="0.15" layer="51"/>
 </package>
 <package name="SOT23-6">
-<wire x1="-1.35" y1="-0.4" x2="-1.35" y2="0.4" width="0.125" layer="21"/>
-<wire x1="1.35" y1="-0.4" x2="1.35" y2="0.4" width="0.125" layer="21"/>
-<wire x1="-1.35" y1="0.4" x2="1.35" y2="0.4" width="0.125" layer="21"/>
-<wire x1="-1.35" y1="-0.4" x2="1.35" y2="-0.4" width="0.125" layer="21"/>
+<wire x1="-1.35" y1="-0.45" x2="-1.35" y2="0.45" width="0.125" layer="21"/>
+<wire x1="1.35" y1="-0.45" x2="1.35" y2="0.45" width="0.125" layer="21"/>
+<wire x1="-1.35" y1="0.45" x2="1.35" y2="0.45" width="0.125" layer="21"/>
+<wire x1="-1.35" y1="-0.45" x2="1.35" y2="-0.45" width="0.125" layer="21"/>
 <smd name="1" x="-0.95" y="-1.2" dx="1.2" dy="0.7" layer="1" rot="R90"/>
 <smd name="6" x="-0.95" y="1.2" dx="1.2" dy="0.7" layer="1" rot="R90"/>
 <smd name="5" x="0" y="1.2" dx="1.2" dy="0.7" layer="1" rot="R90"/>
@@ -431,15 +431,7 @@ INFINEON, www.infineon.com/cmc_upload/0/000/010/257/eh_db_5b.pdf</description>
 <wire x1="1.7" y1="2.2" x2="1.7" y2="-2.2" width="0" layer="39"/>
 <wire x1="1.7" y1="-2.2" x2="-1.7" y2="-2.2" width="0" layer="39"/>
 <wire x1="-1.7" y1="-2.2" x2="-1.7" y2="2.2" width="0" layer="39"/>
-<rectangle x1="-1.35" y1="-0.4" x2="-0.85" y2="0.1" layer="21"/>
-<wire x1="-1.4" y1="0.75" x2="1.45" y2="0.75" width="0.15" layer="52"/>
-<wire x1="1.45" y1="0.75" x2="1.45" y2="-0.75" width="0.15" layer="52"/>
-<wire x1="1.45" y1="-0.75" x2="-1.4" y2="-0.75" width="0.15" layer="52"/>
-<wire x1="-1.4" y1="-0.75" x2="-1.4" y2="0.75" width="0.15" layer="52"/>
-<wire x1="-1.4" y1="0.75" x2="1.45" y2="0.75" width="0.15" layer="51"/>
-<wire x1="1.45" y1="0.75" x2="1.45" y2="-0.75" width="0.15" layer="51"/>
-<wire x1="1.45" y1="-0.75" x2="-1.4" y2="-0.75" width="0.15" layer="51"/>
-<wire x1="-1.4" y1="-0.75" x2="-1.4" y2="0.75" width="0.15" layer="51"/>
+<rectangle x1="-1.4" y1="-0.5" x2="-0.9" y2="0" layer="21"/>
 </package>
 <package name="POT3361">
 <smd name="2" x="0" y="3.2" dx="3.3" dy="1.19" layer="1" rot="R90"/>
@@ -538,11 +530,6 @@ NS Package M08A</description>
 <rectangle x1="0.39" y1="2" x2="0.88" y2="3.1" layer="51"/>
 <rectangle x1="-0.88" y1="2" x2="-0.39" y2="3.1" layer="51"/>
 <rectangle x1="-2.15" y1="2" x2="-1.66" y2="3.1" layer="51"/>
-<wire x1="-2.5" y1="1" x2="2.5" y2="1" width="0.15" layer="21"/>
-<wire x1="2.5" y1="1" x2="2.5" y2="-1" width="0.15" layer="21"/>
-<wire x1="2.5" y1="-1" x2="-2.5" y2="-1" width="0.15" layer="21"/>
-<wire x1="-2.5" y1="-1" x2="-2.5" y2="1" width="0.15" layer="21"/>
-<circle x="-2" y="-0.5" radius="0.316225" width="0" layer="21"/>
 </package>
 <package name="MMSOP08">
 <description>&lt;b&gt;Molded Mini Small Outline Package&lt;/b&gt; 8 - Lead (0.118" Wide)&lt;p&gt;
@@ -1171,6 +1158,39 @@ Source: http://cache.national.com/ds/LM/LM386.pdf</description>
 <wire x1="3.5" y1="-1.5" x2="-3.5" y2="-1.5" width="0" layer="39"/>
 <wire x1="-3.5" y1="-1.5" x2="-3.5" y2="1.5" width="0" layer="39"/>
 </package>
+<package name="DIL16X300">
+<pad name="1" x="-8.89" y="-3.81" drill="0.8" diameter="1.6764" shape="square" rot="R180"/>
+<pad name="2" x="-6.35" y="-3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="3" x="-3.81" y="-3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="4" x="-1.27" y="-3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="5" x="1.27" y="-3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="6" x="3.81" y="-3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="7" x="6.35" y="-3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="8" x="8.89" y="-3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="9" x="8.89" y="3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="10" x="6.35" y="3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="11" x="3.81" y="3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="12" x="1.27" y="3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="13" x="-1.27" y="3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="14" x="-3.81" y="3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="15" x="-6.35" y="3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<pad name="16" x="-8.89" y="3.81" drill="0.8" diameter="1.6764" rot="R180"/>
+<wire x1="-10.16" y1="-5.08" x2="-10.16" y2="-1.27" width="0.15" layer="21"/>
+<wire x1="-10.16" y1="1.27" x2="-10.16" y2="5.08" width="0.15" layer="21"/>
+<wire x1="-10.16" y1="5.08" x2="10.16" y2="5.08" width="0.15" layer="21"/>
+<wire x1="10.16" y1="5.08" x2="10.16" y2="-5.08" width="0.15" layer="21"/>
+<wire x1="10.16" y1="-5.08" x2="-10.16" y2="-5.08" width="0.15" layer="21"/>
+<wire x1="-10.16" y1="-1.27" x2="-10.16" y2="1.27" width="0.15" layer="21" curve="180"/>
+<wire x1="-10.16" y1="5.08" x2="10.16" y2="5.08" width="0" layer="39"/>
+<wire x1="10.16" y1="5.08" x2="10.16" y2="-5.08" width="0" layer="39"/>
+<wire x1="10.16" y1="-5.08" x2="-10.16" y2="-5.08" width="0" layer="39"/>
+<wire x1="-10.16" y1="-5.08" x2="-10.16" y2="5.08" width="0" layer="39"/>
+<text x="-8.89" y="-6.35" size="1" layer="21" ratio="10" rot="R90">1</text>
+<text x="10.16" y="-6.35" size="1" layer="21" ratio="10" rot="R90">8</text>
+<text x="10.16" y="5.588" size="1" layer="21" ratio="10" rot="R90">9</text>
+<text x="-9.144" y="5.334" size="1" layer="21" ratio="10" rot="R90">16</text>
+<text x="-10.5" y="-2" size="1" layer="25" ratio="10" rot="R90">&gt;NAME</text>
+</package>
 </packages>
 <symbols>
 <symbol name="CAP-POL">
@@ -1604,8 +1624,8 @@ Source: http://cache.national.com/ds/LM/LM386.pdf</description>
 <wire x1="5.08" y1="-10.16" x2="-5.08" y2="-10.16" width="0.1524" layer="94"/>
 <wire x1="-5.08" y1="-10.16" x2="-5.08" y2="12.7" width="0.1524" layer="94"/>
 <circle x="2.54" y="-7.62" radius="1.016" width="0" layer="94"/>
-<text x="-5.08" y="13.716" size="1.778" layer="95" ratio="10">&gt;NAME</text>
-<text x="-5.08" y="-12.7" size="1.778" layer="96" ratio="10">&gt;VALUE</text>
+<text x="-5.08" y="13.716" size="1.4224" layer="95" ratio="10">&gt;NAME</text>
+<text x="-5.08" y="-12.7" size="1.4224" layer="96" ratio="10">&gt;VALUE</text>
 </symbol>
 <symbol name="TS-026">
 <pin name="1" x="-7.62" y="5.08" visible="pad" length="short"/>
@@ -2616,6 +2636,36 @@ Source: http://cache.national.com/ds/LM/LM386.pdf</description>
 </device>
 </devices>
 </deviceset>
+<deviceset name="DIL16X300" prefix="CN">
+<gates>
+<gate name="G$1" symbol="HRS-A3C-16DA" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="DIL16X300">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="10" pad="10"/>
+<connect gate="G$1" pin="11" pad="11"/>
+<connect gate="G$1" pin="12" pad="12"/>
+<connect gate="G$1" pin="13" pad="13"/>
+<connect gate="G$1" pin="14" pad="14"/>
+<connect gate="G$1" pin="15" pad="15"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+<connect gate="G$1" pin="5" pad="5"/>
+<connect gate="G$1" pin="6" pad="6"/>
+<connect gate="G$1" pin="7" pad="7"/>
+<connect gate="G$1" pin="8" pad="8"/>
+<connect gate="G$1" pin="9" pad="9"/>
+<connect gate="G$1" pin="P16" pad="16"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
 </devicesets>
 </library>
 <library name="_Coherix">
@@ -4581,6 +4631,7 @@ http://www.weartronics.com/</description>
 <part name="D7" library="_RoweTel" deviceset="PESD5ZX" device="" value="DNL"/>
 <part name="V143" library="A-SUPPLY2" deviceset="GND" device=""/>
 <part name="D8" library="_RoweTel" deviceset="PESD5ZX" device="" value="DNL"/>
+<part name="CN13" library="_RoweTel" deviceset="DIL16X300" device=""/>
 </parts>
 <sheets>
 <sheet>
@@ -6706,9 +6757,9 @@ http://www.weartronics.com/</description>
 <attribute name="NAME" x="106.68" y="137.16" size="1.4224" layer="95" ratio="9"/>
 <attribute name="VALUE" x="106.68" y="134.62" size="1.4224" layer="96" ratio="9"/>
 </instance>
-<instance part="R42" gate="G$1" x="129.54" y="147.32" smashed="yes" rot="R90">
-<attribute name="NAME" x="124.46" y="152.4" size="1.4224" layer="95" ratio="9"/>
-<attribute name="VALUE" x="124.46" y="157.48" size="1.4224" layer="96" ratio="9"/>
+<instance part="R42" gate="G$1" x="129.54" y="147.32" smashed="yes" rot="MR90">
+<attribute name="NAME" x="134.62" y="152.4" size="1.4224" layer="95" ratio="9" rot="MR0"/>
+<attribute name="VALUE" x="134.62" y="157.48" size="1.4224" layer="96" ratio="9" rot="MR0"/>
 </instance>
 <instance part="V62" gate="GND" x="111.76" y="109.22" smashed="yes">
 <attribute name="VALUE" x="109.22" y="105.918" size="1.4224" layer="96" ratio="9"/>
@@ -7021,6 +7072,10 @@ http://www.weartronics.com/</description>
 <attribute name="NAME" x="45.72" y="121.92" size="1.4224" layer="95" ratio="10"/>
 <attribute name="VALUE" x="45.72" y="119.38" size="1.4224" layer="96" ratio="10"/>
 </instance>
+<instance part="CN13" gate="G$1" x="368.3" y="182.88" smashed="yes">
+<attribute name="NAME" x="363.22" y="196.596" size="1.4224" layer="95" ratio="10"/>
+<attribute name="VALUE" x="363.22" y="170.18" size="1.4224" layer="96" ratio="10"/>
+</instance>
 </instances>
 <busses>
 </busses>
@@ -7840,18 +7895,18 @@ http://www.weartronics.com/</description>
 </net>
 <net name="N$41" class="0">
 <segment>
-<wire x1="119.38" y1="147.32" x2="121.92" y2="147.32" width="0.1524" layer="91"/>
-<pinref part="R42" gate="G$1" pin="1"/>
-<pinref part="R42" gate="G$1" pin="2"/>
-<wire x1="129.54" y1="152.4" x2="129.54" y2="154.94" width="0.1524" layer="91"/>
 <wire x1="129.54" y1="154.94" x2="119.38" y2="154.94" width="0.1524" layer="91"/>
 <wire x1="119.38" y1="154.94" x2="119.38" y2="147.32" width="0.1524" layer="91"/>
 <pinref part="R53" gate="G$1" pin="2"/>
 <wire x1="119.38" y1="144.78" x2="119.38" y2="147.32" width="0.1524" layer="91"/>
-<junction x="119.38" y="147.32"/>
 <wire x1="129.54" y1="154.94" x2="132.08" y2="154.94" width="0.1524" layer="91"/>
-<junction x="129.54" y="154.94"/>
 <pinref part="C54" gate="G$1" pin="1"/>
+<pinref part="R42" gate="G$1" pin="3"/>
+<wire x1="121.92" y1="147.32" x2="119.38" y2="147.32" width="0.1524" layer="91"/>
+<pinref part="R42" gate="G$1" pin="2"/>
+<wire x1="129.54" y1="152.4" x2="129.54" y2="154.94" width="0.1524" layer="91"/>
+<junction x="129.54" y="154.94"/>
+<junction x="119.38" y="147.32"/>
 </segment>
 </net>
 <net name="N$46" class="0">
@@ -8047,8 +8102,6 @@ http://www.weartronics.com/</description>
 </net>
 <net name="N$27" class="0">
 <segment>
-<pinref part="R42" gate="G$1" pin="3"/>
-<wire x1="137.16" y1="147.32" x2="139.7" y2="147.32" width="0.1524" layer="91"/>
 <pinref part="U9" gate="G$1" pin="OUT"/>
 <pinref part="R29" gate="G$1" pin="2"/>
 <wire x1="139.7" y1="147.32" x2="142.24" y2="147.32" width="0.1524" layer="91"/>
@@ -8056,11 +8109,13 @@ http://www.weartronics.com/</description>
 <wire x1="139.7" y1="129.54" x2="147.32" y2="129.54" width="0.1524" layer="91"/>
 <wire x1="139.7" y1="147.32" x2="139.7" y2="129.54" width="0.1524" layer="91"/>
 <junction x="139.7" y="129.54"/>
-<junction x="139.7" y="147.32"/>
 <pinref part="C54" gate="G$1" pin="2"/>
 <wire x1="142.24" y1="154.94" x2="144.78" y2="154.94" width="0.1524" layer="91"/>
 <wire x1="144.78" y1="154.94" x2="144.78" y2="147.32" width="0.1524" layer="91"/>
 <wire x1="144.78" y1="147.32" x2="142.24" y2="147.32" width="0.1524" layer="91"/>
+<pinref part="R42" gate="G$1" pin="1"/>
+<wire x1="137.16" y1="147.32" x2="139.7" y2="147.32" width="0.1524" layer="91"/>
+<junction x="139.7" y="147.32"/>
 </segment>
 </net>
 <net name="AIN2" class="0">