added some questions after tetsing PTT on a FT-817

git-svn-id: https://svn.code.sf.net/p/freetel/code@1849 01035d8c-6547-0410-b346-abe4f91aad63

diff --git a/smartmic/SM1000-C/Change-Log-C.txt b/smartmic/SM1000-C/Change-Log-C.txt
index aad5d3bf049dc3222d42508c7f5cfa7d22452609..8cb0f90e3fe63c80668937bb3e5a7d868fe70d09 100644 (file)
--- a/smartmic/SM1000-C/Change-Log-C.txt
+++ b/smartmic/SM1000-C/Change-Log-C.txt
@@ -299,7 +299,17 @@ Status:    Researching effect on TPS54329E SW PS chip.     RGB 09/15/14
 \r
 61. LM386 power supply bypassing to remove switcher "washing macine" type noise from ouput audio.  4.7 ohm (rated at 200mA, IIR=0.2W) between VIN and pin 6 U8.  220uF electrolytic between pin 6 and GND.  Both placed near U8.\r
 \r
+62.  Do we want CN9 to disable RJ45 PTT or perhaps have both in parallel?  Do all radios switch PTT to ground?  Or should both ends of LD2 be routed to CN9 and CN14? \r
+\r
 Questions:\r
 1.  SM1000 designed to be operated with 6-16V power supply. Would should recommend 9-15V. Should we recommend PS? Many will operate at 13.8V(rig supply). Do we risk ground loops, etc. using rig supply?\r
 2.  Should C37, C39, C40 be 50V? Or, only caps connected to VIN?\r
 3.  Are you going to supply speaker? Need J4?\r
+\r
+Production Questions:\r
+\r
+1/ How do end users deal with RJ45 patch panel?  Hand solder?\r
+\r
+2/ Do we supply a loud speaker?\r
+\r
+3/ What enclosure do we supply?\r