\r
Change Log for SM1000-REV-B2\r
\r
+Changes 07/15/2014\r
+\r
\r
1. [X] SW3 holes not big enough.\r
Hole is .5mm. Pin is .6mm. Hole should be 1.0mm per spec sheet. Will change. \r
19. [X] replace J7 & J2 with 0805 0 ohm Rs\r
Jumpers were originally inserted to permit bringing up SM1000 and protecting circuitry from overvoltages and measuring currents. \r
Jumpers replaced with 0 OHM resistors. RGB 07/15/2014\r
+ \r
+20. [X] Added item numbers to this file to facilitate communication. RGB 07/15/2014\r
+\r