52. [X] CN2 difficult to hand solder, extend padds back towards outline\r
Status: Extended RGB 09/24/14\r
\r
-53. [X] Replace R9 with a bead or inductor.\r
+53. [ ] Replace R9 with a bead\r
Status: Replaced R9 with Taiyo Yuden CBC3225T101MR inductor. RGB 09/11/14\r
- Matt, VK5ZM, suggested:\r
-\r
- http://www.digikey.com/product-detail/en/CBC3225T101MR/587-1628-1-ND/1008243\r
+ http://www.digikey.com/product-detail/en/CBC3225T101MR/587-1628-1-ND/1008243\r
Status: Replace in schematic & BOM. Will position on PCB during re-layout. RGB 09/15/14\r
\r
+ DR 30 Sep 2014; Matt, VK5ZM, suggested Taiyo Yuden\r
+ CBC3225T101MR however Glen English suggested this would give\r
+ an inductive kick so lets use a bead for L3. As per Matt's\r
+ suggestion pls move C30 to junction of L3 and D2.\r
+ \r
54. [X] Replace C25, C29, C28 with tants.\r
Status: Switched Ceramics to Tantalum.\r
\r
Risk List\r
---------\r
\r
-1. [ ] Risk: Inductive kick from L3 damaging components on board. \r
+1. [X] Risk: Inductive kick from L3 damaging components on board. \r
Action: Confirm value with Matt, decide on if we should \r
- downgrade to a bead\r
+ downgrade to a bead. (see #53, decn made to use bead).\r
\r
2. [ ] Risk: Untested changes in schematic leading to a major problem\r
in 100 Beta resulting in repair. Action: David to review all\r