Added schematic power switch SW3 wiring change(.pngs) to accomodate PCB routing.

Updated SM1000-E-change-log.txt file to reflect update and comments on #27
RGB

git-svn-id: https://svn.code.sf.net/p/freetel/code@2164 01035d8c-6547-0410-b346-abe4f91aad63

diff --git a/smartmic/SM1000-E/PWR-NEW.png b/smartmic/SM1000-E/PWR-NEW.png
new file mode 100644 (file)
index 0000000..b1dec50
Binary files /dev/null and b/smartmic/SM1000-E/PWR-NEW.png differ

diff --git a/smartmic/SM1000-E/PWR-OLD.png b/smartmic/SM1000-E/PWR-OLD.png
new file mode 100644 (file)
index 0000000..77bb832
Binary files /dev/null and b/smartmic/SM1000-E/PWR-OLD.png differ

diff --git a/smartmic/SM1000-E/SM1000-E-change-log.txt b/smartmic/SM1000-E/SM1000-E-change-log.txt
index 74f83a1837a0a0bc6ef20507ad4716a0cb16e5dc..394aaf71884ade1f4e52904ba184f94b95ffa8a6 100644 (file)
--- a/smartmic/SM1000-E/SM1000-E-change-log.txt
+++ b/smartmic/SM1000-E/SM1000-E-change-log.txt
@@ -7,8 +7,8 @@ SM1000-E-CHANGE-LOG.TXT
        \r
 3.  [X]                Change SPKR CONN J4 to CONN-BOOM-XH-2A.\r
 \r
-4.  [ ]                Added part outlines to layer tDocu for documentation.\r
-                       In progress, adding to outlines in time.\r
+4.  [X]                Added part outlines to layer tDocu for documentation.\r
+                       All pars have outline on tplace layer.\r
 \r
 05/18/15\r
 \r
@@ -23,7 +23,7 @@ SM1000-E-CHANGE-LOG.TXT
 7.  [X]                U1, CPU pins extend to the end of the pads.\r
                                Corrected RGB\r
 \r
-8.  [X]                Lad pattern for LEDs too large. I will look into this. RGB\r
+8.  [ ]                Land pattern for LEDs too large. I will look into this. RGB\r
                                Land pattern size recommended by vendor. If too large, need suggestion.  RGB\r
 \r
 9.  [X]                SW5 land pattern too wide. Check specification.\r
@@ -32,7 +32,7 @@ SM1000-E-CHANGE-LOG.TXT
 10. [X]                C32, C59 footprint too short.\r
                                corrected package  RGB\r
 \r
-       11. [X] L1 Land pattern too wide.\r
+11. [X]                L1 Land pattern too wide.\r
                                Corrected package  RGB\r
 \r
 12  [X]                CN4     Bubble after SMT(high temperature)\r
@@ -40,8 +40,8 @@ SM1000-E-CHANGE-LOG.TXT
                                I can change it.(RGB)\r
        *****   Edwin reports other vendors parts do same. Action? RGB\r
 \r
-13. [X]        R46     Easy to break R46 with handling.\r
-                       Add cement after production.\r
+13. [X]                R46     Easy to break R46 with handling.\r
+                               Add cement after production.\r
        *****           Note, I accidently hit and moved pot removing PCB from case. Suggest applying cement prior to soldering RGB\r
 \r
 14. [X]                PCB     Problem reflowing CN10 USB connector.\r
@@ -90,9 +90,12 @@ SM1000-E-CHANGE-LOG.TXT
 \r
 26  [ ]     From Mel: PTT being pulsed low on power up.\r
 \r
-27  [ ]     From Peter VK5APR, DC input connector hole offset down wrt to\r
+27  [X]     From Peter VK5APR, DC input connector hole offset down wrt to\r
             enclosure on his unit.  Is this true on any other\r
             samples, or maybe a 1 off?  RJ45 aperture in enclosure\r
             also slightly offset to left.\r
+                       \r
+       *****           RJ45 and Power connectors are almost perfectly aligned on the units I have.\r
+                               Perhaps a problem when PCBs are assembled into case?   RGB\r
 \r
 28  [ ]        firmware   Check analog speech level in digital mode.\r

diff --git a/smartmic/SM1000-E/SM1000-E.brd b/smartmic/SM1000-E/SM1000-E.brd
index 66ea71eacd7bdedf01d4f8eb26f6398eaa46c912..2983d0546f3416791b964a32bf4d8d78d7688280 100644 (file)
--- a/smartmic/SM1000-E/SM1000-E.brd
+++ b/smartmic/SM1000-E/SM1000-E.brd
@@ -9,7 +9,7 @@
 <grid distance="0.5" unitdist="mm" unit="mm" style="dots" multiple="1" display="yes" altdistance="0.1" altunitdist="mm" altunit="mm"/>
 <layers>
 <layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
-<layer number="2" name="GND" color="3" fill="1" visible="no" active="yes"/>
+<layer number="2" name="GND" color="3" fill="1" visible="yes" active="yes"/>
 <layer number="3" name="Route3" color="4" fill="3" visible="no" active="no"/>
 <layer number="4" name="Route4" color="1" fill="4" visible="no" active="no"/>
 <layer number="5" name="Route5" color="4" fill="4" visible="no" active="no"/>
@@ -23,9 +23,9 @@
 <layer number="13" name="Route13" color="4" fill="5" visible="no" active="no"/>
 <layer number="14" name="Route14" color="1" fill="6" visible="no" active="no"/>
 <layer number="15" name="VDD" color="6" fill="1" visible="no" active="yes"/>
-<layer number="16" name="Bottom" color="1" fill="1" visible="no" active="yes"/>
-<layer number="17" name="Pads" color="2" fill="1" visible="no" active="yes"/>
-<layer number="18" name="Vias" color="2" fill="1" visible="no" active="yes"/>
+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
 <layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
@@ -3464,11 +3464,11 @@ design rules under a new name.</description>
 <element name="P13" library="_Coherix" package="TPAD50" value="TPAD50" x="3.5" y="97" smashed="yes" rot="R180">
 <attribute name="NAME" x="2.9" y="95.2" size="0.8128" layer="25" font="vector"/>
 </element>
-<element name="P14" library="_Coherix" package="TPAD50" value="TPAD50" x="3.5" y="94" smashed="yes">
-<attribute name="NAME" x="2.8" y="92.2" size="0.8128" layer="25" font="vector"/>
+<element name="P14" library="_Coherix" package="TPAD50" value="TPAD50" x="3.5" y="95" smashed="yes">
+<attribute name="NAME" x="2.8" y="93.2" size="0.8128" layer="25" font="vector"/>
 </element>
-<element name="P16" library="_Coherix" package="TPAD50" value="TPAD50" x="6" y="94" smashed="yes">
-<attribute name="NAME" x="5.5" y="92.2" size="0.8128" layer="25" font="vector"/>
+<element name="P16" library="_Coherix" package="TPAD50" value="TPAD50" x="6" y="95" smashed="yes">
+<attribute name="NAME" x="5.5" y="93.2" size="0.8128" layer="25" font="vector"/>
 </element>
 <element name="P18" library="_Coherix" package="TPAD50" value="TPAD50" x="62.7" y="15.9" smashed="yes" rot="R180">
 <attribute name="NAME" x="62.29" y="19.14" size="0.8128" layer="25" font="vector" rot="R270"/>
@@ -3652,7 +3652,7 @@ design rules under a new name.</description>
 </element>
 <element name="SPKR1" library="_RoweTel" package="NOPACKAGE" value="SPKR-HY4004M-001" x="4.5" y="-0.5" locked="yes"/>
 <element name="DRILEGEND" library="drilegend" package="DRILEGEND" value="" x="21.266053125" y="-19.65666875"/>
-<element name="SW3" library="_RoweTel" package="SW-LC2259" value="SW-LC2259EENP" x="-5.5" y="87" rot="R270"/>
+<element name="SW3" library="_RoweTel" package="SW-LC2259" value="SW-LC2259EENP" x="6" y="87" rot="R270"/>
 <element name="SW1" library="_RoweTel" package="SW-LC2259" value="SW-LC2259" x="13" y="71"/>
 <element name="J4" library="_RoweTel" package="CONN-BOOM-XH-2A" value="CONN-BOOM-XH-2A" x="27" y="35.5" rot="R180"/>
 </elements>
@@ -3755,7 +3755,7 @@ design rules under a new name.</description>
 <wire x1="15" y1="75.5" x2="15" y2="75.45" width="0.2" layer="1"/>
 <wire x1="15" y1="75.45" x2="15" y2="74.5" width="0.2" layer="1"/>
 <via x="15" y="74.5" extent="1-16" drill="0.4" diameter="0.8"/>
-<via x="8.5" y="93" extent="1-16" drill="0.4" diameter="0.8"/>
+<via x="7.5" y="94" extent="1-16" drill="0.4" diameter="0.8"/>
 <via x="41.5" y="69.8" extent="1-16" drill="0.6" diameter="0.8"/>
 <via x="32.5" y="73" extent="1-16" drill="0.6" diameter="0.8"/>
 <via x="28.5" y="70.5" extent="1-16" drill="0.6" diameter="0.8"/>
@@ -3772,13 +3772,7 @@ design rules under a new name.</description>
 <via x="29.4" y="54.9" extent="1-16" drill="0.6" diameter="1.27"/>
 <wire x1="29" y1="56.6" x2="30.1" y2="56.6" width="0.8" layer="1"/>
 <wire x1="9.5" y1="92.5" x2="9" y2="92.5" width="0.2" layer="1"/>
-<wire x1="9" y1="92.5" x2="8.5" y2="93" width="0.2" layer="1"/>
 <wire x1="12.5" y1="92.5" x2="13" y2="92.5" width="0.2" layer="1"/>
-<wire x1="3.5" y1="97" x2="5" y2="95.5" width="0.4" layer="1"/>
-<wire x1="5" y1="95.5" x2="6.5" y2="95.5" width="0.4" layer="1"/>
-<wire x1="6.5" y1="95.5" x2="7" y2="95.5" width="0.4" layer="1"/>
-<wire x1="7" y1="95.5" x2="8.5" y2="94" width="0.4" layer="1"/>
-<wire x1="8.5" y1="94" x2="8.5" y2="93" width="0.4" layer="1"/>
 <wire x1="14" y1="93.5" x2="13.5" y2="93.5" width="0.2" layer="1"/>
 <wire x1="13.5" y1="93.5" x2="13.3" y2="93.3" width="0.2" layer="1"/>
 <wire x1="13.3" y1="93.3" x2="13.3" y2="93" width="0.2" layer="1"/>
@@ -3817,6 +3811,14 @@ design rules under a new name.</description>
 <wire x1="33.525" y1="56.6" x2="33.525" y2="58" width="0.8" layer="1"/>
 <wire x1="33.525" y1="54.9" x2="29.4" y2="54.9" width="0.8" layer="1"/>
 <wire x1="32.5" y1="68" x2="32.5" y2="73" width="0.25" layer="1"/>
+<wire x1="7" y1="98.5" x2="4" y2="98.5" width="0.2" layer="1"/>
+<wire x1="4" y1="98.5" x2="3.5" y2="98" width="0.2" layer="1"/>
+<wire x1="3.5" y1="98" x2="3.5" y2="97" width="0.2" layer="1"/>
+<wire x1="9" y1="92.5" x2="8" y2="92.5" width="0.2" layer="1"/>
+<wire x1="8" y1="92.5" x2="7.5" y2="93" width="0.2" layer="1"/>
+<wire x1="7.5" y1="93" x2="7.5" y2="94" width="0.2" layer="1"/>
+<wire x1="7" y1="98.5" x2="7.5" y2="98" width="0.2" layer="1"/>
+<wire x1="7.5" y1="98" x2="7.5" y2="94" width="0.2" layer="1"/>
 <wire x1="32.5" y1="73" x2="37.25" y2="70.75" width="0" layer="19" extent="1-1"/>
 <wire x1="-5" y1="63.5" x2="13" y2="69.75" width="0" layer="19" extent="1-1"/>
 </signal>
@@ -4262,8 +4264,6 @@ design rules under a new name.</description>
 <wire x1="20.05" y1="68.65" x2="18.7" y2="70" width="0" layer="19" extent="1-1"/>
 <wire x1="2.55" y1="68.05" x2="7.3" y2="68.9" width="0" layer="19" extent="16-16"/>
 <wire x1="-5" y1="58.6" x2="3.35" y2="55.1" width="0" layer="19" extent="1-1"/>
-<wire x1="-7.6" y1="92.7" x2="3.5" y2="94" width="0" layer="19" extent="1-1"/>
-<wire x1="-3.4" y1="81.3" x2="-7.6" y2="92.7" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="NRST">
 <contactref element="U1" pad="14"/>
@@ -4464,7 +4464,7 @@ design rules under a new name.</description>
 <wire x1="16.5" y1="85.5" x2="14.5" y2="83.5" width="0.5" layer="1"/>
 <wire x1="14.5" y1="83.5" x2="10.5" y2="83.5" width="0.5" layer="1"/>
 <wire x1="10.5" y1="83.5" x2="9.5" y2="82.5" width="0.5" layer="1"/>
-<wire x1="9.5" y1="82.5" x2="9.5" y2="78" width="0.5" layer="1"/>
+<wire x1="9.5" y1="82.5" x2="9.5" y2="74.5" width="0.5" layer="1"/>
 <wire x1="7.5" y1="58.55" x2="6.65" y2="58.55" width="0.4" layer="1"/>
 <wire x1="6.65" y1="58.55" x2="6.3" y2="58.2" width="0.4" layer="1"/>
 <wire x1="6.3" y1="58.2" x2="5" y2="58.2" width="0.4" layer="1"/>
@@ -4476,20 +4476,19 @@ design rules under a new name.</description>
 <wire x1="19" y1="54.5" x2="17.5" y2="56" width="0.8" layer="1"/>
 <wire x1="7.5" y1="57" x2="7.9" y2="56.6" width="0.8" layer="1"/>
 <wire x1="7.9" y1="56.6" x2="16.9" y2="56.6" width="0.8" layer="1"/>
-<wire x1="16.9" y1="56.6" x2="17.25" y2="56.25" width="0.8" layer="1"/>
+<wire x1="16.9" y1="56.6" x2="17.5" y2="56" width="0.8" layer="1"/>
 <wire x1="19.3" y1="56" x2="17.5" y2="56" width="0.8" layer="1"/>
-<wire x1="17.5" y1="56" x2="17.25" y2="56.25" width="0.8" layer="1"/>
 <wire x1="25.37" y1="42.11" x2="25.26" y2="42" width="0.4" layer="1"/>
 <wire x1="25.26" y1="42" x2="24" y2="42" width="0.4" layer="1"/>
-<wire x1="8.5" y1="67" x2="8.5" y2="62" width="0.4" layer="1"/>
 <via x="8.5" y="62" extent="1-16" drill="0.6" diameter="1.27"/>
+<wire x1="8.5" y1="64.5" x2="8.5" y2="62" width="0.5" layer="1"/>
 <wire x1="8.5" y1="62" x2="7.5" y2="61" width="0.8" layer="16"/>
 <wire x1="7.5" y1="61" x2="7.5" y2="57" width="0.8" layer="16"/>
-<wire x1="8.5" y1="67" x2="4.5" y2="71" width="0.5" layer="1"/>
-<wire x1="4.5" y1="71" x2="4.5" y2="73" width="0.5" layer="1"/>
-<wire x1="4.5" y1="73" x2="9.5" y2="78" width="0.5" layer="1"/>
 <wire x1="16.7" y1="41" x2="17.7" y2="42" width="0.8" layer="1"/>
 <wire x1="17.7" y1="42" x2="24" y2="42" width="0.8" layer="1"/>
+<wire x1="5" y1="68" x2="8.5" y2="64.5" width="0.5" layer="1"/>
+<wire x1="5" y1="68" x2="5" y2="70" width="0.5" layer="1"/>
+<wire x1="5" y1="70" x2="9.5" y2="74.5" width="0.5" layer="1"/>
 </signal>
 <signal name="N$12">
 <contactref element="C8" pad="1"/>
@@ -5090,56 +5089,44 @@ design rules under a new name.</description>
 <contactref element="R39" pad="1"/>
 <contactref element="R21" pad="1"/>
 <contactref element="C63" pad="1"/>
-<wire x1="9.2" y1="80.5" x2="9.2" y2="84" width="1.27" layer="15"/>
-<wire x1="9.2" y1="84" x2="9.2" y2="86" width="1.27" layer="15"/>
-<wire x1="9.2" y1="86" x2="7.7" y2="87.5" width="1.27" layer="15"/>
-<wire x1="7.7" y1="87.5" x2="1.5" y2="87.5" width="1.27" layer="15"/>
 <via x="45.5" y="96.5" extent="1-16" drill="0.6" diameter="0.8"/>
 <wire x1="47.5" y1="96.95" x2="49.25" y2="96.95" width="0.5" layer="1"/>
-<wire x1="20.5" y1="95" x2="10.9" y2="95" width="1.27" layer="15"/>
-<wire x1="1.5" y1="98.5" x2="1.5" y2="91" width="1.27" layer="15"/>
-<wire x1="1.5" y1="91" x2="1.5" y2="87.5" width="1.27" layer="15"/>
-<wire x1="20.5" y1="95" x2="21" y2="95" width="1.27" layer="15"/>
 <wire x1="21" y1="95" x2="22.5" y2="93.5" width="1.27" layer="15"/>
-<wire x1="22.5" y1="93.5" x2="24" y2="93.5" width="1.27" layer="15"/>
 <wire x1="36" y1="96" x2="45" y2="96" width="1.27" layer="15"/>
 <wire x1="45" y1="96" x2="45.5" y2="96.5" width="1.27" layer="15"/>
 <wire x1="47.5" y1="96.95" x2="45.95" y2="96.95" width="0.8" layer="1"/>
 <wire x1="45.95" y1="96.95" x2="45.5" y2="96.5" width="0.8" layer="1"/>
-<wire x1="32" y1="93.5" x2="33.5" y2="93.5" width="1.27" layer="15"/>
 <wire x1="33.5" y1="93.5" x2="36" y2="96" width="1.27" layer="15"/>
-<wire x1="4" y1="70.5" x2="6" y2="68.5" width="1.8" layer="2"/>
-<wire x1="6" y1="68.5" x2="6" y2="60.5" width="1.8" layer="2"/>
+<wire x1="3.5" y1="68.5" x2="6" y2="66" width="1.8" layer="2"/>
+<wire x1="6" y1="66" x2="6" y2="60.5" width="1.8" layer="2"/>
 <wire x1="6" y1="60.5" x2="2" y2="60.5" width="1.8" layer="2"/>
 <wire x1="2" y1="60.5" x2="2" y2="33" width="1.8" layer="2"/>
-<wire x1="2" y1="33" x2="2.5" y2="33" width="1.8" layer="2"/>
 <wire x1="13.5" y1="26.65" x2="13.5" y2="29.5" width="1" layer="1"/>
 <wire x1="13.5" y1="29.5" x2="8" y2="29.5" width="1" layer="1"/>
 <wire x1="8" y1="29.5" x2="6.5" y2="29.5" width="1" layer="1"/>
 <via x="6.5" y="29.5" extent="1-16" drill="0.6" diameter="0.8"/>
 <via x="8" y="29.5" extent="1-16" drill="0.6" diameter="0.8"/>
-<wire x1="2.5" y1="33" x2="6.5" y2="33" width="1.8" layer="2"/>
+<wire x1="2" y1="33" x2="6.5" y2="33" width="1.8" layer="2"/>
 <wire x1="6.5" y1="29.5" x2="8" y2="29.5" width="1.8" layer="2"/>
 <wire x1="6.5" y1="29.5" x2="6.5" y2="33" width="1.8" layer="2"/>
 <wire x1="13.5" y1="29.5" x2="17" y2="29.5" width="1" layer="1"/>
-<wire x1="17" y1="29.5" x2="18" y2="30.5" width="1" layer="1"/>
-<wire x1="18" y1="30.5" x2="18.2" y2="30.7" width="1" layer="1"/>
+<wire x1="17" y1="29.5" x2="18.2" y2="30.7" width="1" layer="1"/>
 <wire x1="18.2" y1="30.7" x2="18.2" y2="38" width="1" layer="1"/>
 <wire x1="18.2" y1="39.5" x2="18.2" y2="38" width="0.5" layer="1"/>
-<wire x1="8" y1="98.5" x2="6" y2="98.5" width="1.27" layer="15"/>
-<wire x1="6" y1="98.5" x2="1.5" y2="98.5" width="1.27" layer="15"/>
-<wire x1="4" y1="70.5" x2="3.5" y2="71" width="1.8" layer="2"/>
-<wire x1="3.5" y1="71" x2="3.5" y2="75.5" width="1.8" layer="2"/>
-<wire x1="3.5" y1="75.5" x2="4.75" y2="76.75" width="1.8" layer="2"/>
-<wire x1="10.9" y1="95" x2="8" y2="95" width="1.27" layer="15"/>
-<wire x1="8" y1="95" x2="8" y2="98.5" width="1.27" layer="15"/>
-<wire x1="24" y1="93.5" x2="32" y2="93.5" width="1.27" layer="15"/>
+<wire x1="22.5" y1="93.5" x2="33.5" y2="93.5" width="1.27" layer="15"/>
 <wire x1="6" y1="97" x2="6" y2="98.5" width="0.4" layer="15"/>
-<contactref element="SW3" pad="4"/>
-<contactref element="SW3" pad="1"/>
-<wire x1="4.75" y1="76.75" x2="9.2" y2="80.5" width="0" layer="19" extent="2-15"/>
-<wire x1="-4.25" y1="84.5" x2="1.5" y2="87.5" width="0" layer="19" extent="1-15"/>
-<wire x1="-6.75" y1="84.5" x2="-4.25" y2="84.5" width="0" layer="19" extent="1-1"/>
+<wire x1="21" y1="95" x2="8" y2="95" width="1.27" layer="15"/>
+<wire x1="8" y1="95" x2="8" y2="98.5" width="1.27" layer="15"/>
+<contactref element="SW3" pad="5"/>
+<contactref element="SW3" pad="2"/>
+<wire x1="8" y1="98.5" x2="1.5" y2="98.5" width="1.27" layer="15"/>
+<wire x1="1.5" y1="98.5" x2="1.5" y2="87" width="1.27" layer="15"/>
+<wire x1="1.5" y1="87" x2="4.75" y2="87" width="1.27" layer="15"/>
+<wire x1="7.25" y1="87" x2="4.75" y2="87" width="1.27" layer="16"/>
+<wire x1="3.5" y1="68.5" x2="2.5" y2="69.5" width="1.8" layer="2"/>
+<wire x1="2.5" y1="69.5" x2="2.5" y2="87" width="1.8" layer="2"/>
+<wire x1="2.5" y1="87" x2="4.75" y2="87" width="1.8" layer="2"/>
+<wire x1="8" y1="98.5" x2="6" y2="98.5" width="0" layer="19" extent="15-15"/>
 </signal>
 <signal name="N$43">
 <contactref element="R50" pad="1"/>
@@ -6264,11 +6251,8 @@ design rules under a new name.</description>
 <wire x1="48.2" y1="33.7" x2="49.5" y2="33.7" width="0.2" layer="1"/>
 </signal>
 <signal name="N$81">
-<contactref element="SW3" pad="2"/>
 <contactref element="D2" pad="C"/>
-<contactref element="SW3" pad="5"/>
 <wire x1="2" y1="30.5" x2="2" y2="57.5" width="1.8" layer="15"/>
-<wire x1="2" y1="75" x2="2" y2="83" width="1.8" layer="15"/>
 <wire x1="2.1" y1="28.05" x2="2.1" y2="29.4" width="0.5" layer="1"/>
 <wire x1="2.1" y1="29.4" x2="2" y2="29.5" width="0.5" layer="1"/>
 <via x="3.7" y="29.5" extent="1-16" drill="0.6" diameter="0.8"/>
@@ -6281,8 +6265,11 @@ design rules under a new name.</description>
 <wire x1="6" y1="67.5" x2="6" y2="62" width="1.8" layer="15"/>
 <wire x1="6" y1="62" x2="2" y2="58" width="1.8" layer="15"/>
 <wire x1="2" y1="58" x2="2" y2="57.5" width="1.8" layer="15"/>
-<wire x1="-6.75" y1="87" x2="-4.25" y2="87" width="0" layer="19" extent="1-1"/>
-<wire x1="2" y1="83" x2="-4.25" y2="87" width="0" layer="19" extent="1-15"/>
+<wire x1="2" y1="84.5" x2="2" y2="75" width="1.8" layer="15"/>
+<contactref element="SW3" pad="4"/>
+<contactref element="SW3" pad="1"/>
+<wire x1="2" y1="84.5" x2="4.75" y2="84.5" width="1.8" layer="15"/>
+<wire x1="7.25" y1="84.5" x2="4.75" y2="84.5" width="1.27" layer="16"/>
 </signal>
 <signal name="N$36">
 <contactref element="U5" pad="2"/>

diff --git a/smartmic/SM1000-E/SM1000-E.sch b/smartmic/SM1000-E/SM1000-E.sch
index 7d8878a1be789c6a59371d1a0856d5bf986531e3..1cbe5ff54f505aa7ab579e4a3dec092ce416d481 100644 (file)
--- a/smartmic/SM1000-E/SM1000-E.sch
+++ b/smartmic/SM1000-E/SM1000-E.sch
@@ -6723,15 +6723,15 @@ http://www.weartronics.com/</description>
 <attribute name="VALUE" x="251.46" y="223.52" size="1.4224" layer="96" ratio="9"/>
 </instance>
 <instance part="SW3" gate="G$1" x="86.36" y="248.92" smashed="yes">
-<attribute name="NAME" x="73.66" y="264.16" size="1.4224" layer="95" ratio="10"/>
-<attribute name="VALUE" x="73.66" y="261.62" size="1.4224" layer="95" ratio="10"/>
+<attribute name="NAME" x="73.66" y="266.7" size="1.4224" layer="95" ratio="10"/>
+<attribute name="VALUE" x="73.66" y="264.16" size="1.4224" layer="95" ratio="10"/>
 </instance>
 <instance part="J4" gate="G$1" x="111.76" y="45.72" smashed="yes" rot="R90">
 <attribute name="NAME" x="109.22" y="38.1" size="1.4224" layer="95" ratio="10"/>
 <attribute name="VALUE" x="96.52" y="35.56" size="1.4224" layer="95" ratio="10"/>
 </instance>
-<instance part="V121" gate="GND" x="91.44" y="233.68" smashed="yes">
-<attribute name="VALUE" x="88.9" y="230.378" size="1.4224" layer="96" ratio="9"/>
+<instance part="V121" gate="GND" x="91.44" y="231.14" smashed="yes">
+<attribute name="VALUE" x="88.9" y="227.838" size="1.4224" layer="96" ratio="9"/>
 </instance>
 <instance part="V141" gate="GND" x="71.12" y="233.68" smashed="yes">
 <attribute name="VALUE" x="68.58" y="230.378" size="1.4224" layer="96" ratio="9"/>
@@ -7047,7 +7047,7 @@ http://www.weartronics.com/</description>
 </segment>
 <segment>
 <pinref part="SW3" gate="G$1" pin="7"/>
-<wire x1="91.44" y1="241.3" x2="91.44" y2="236.22" width="0.1524" layer="91"/>
+<wire x1="91.44" y1="241.3" x2="91.44" y2="233.68" width="0.1524" layer="91"/>
 <pinref part="V121" gate="GND" pin="GND"/>
 </segment>
 <segment>
@@ -7144,7 +7144,7 @@ http://www.weartronics.com/</description>
 <wire x1="45.72" y1="76.2" x2="45.72" y2="78.74" width="0.1524" layer="91"/>
 </segment>
 <segment>
-<wire x1="86.36" y1="259.08" x2="96.52" y2="259.08" width="0.1524" layer="91"/>
+<wire x1="96.52" y1="261.62" x2="96.52" y2="259.08" width="0.1524" layer="91"/>
 <pinref part="R21" gate="G$1" pin="1"/>
 <pinref part="C63" gate="G$1" pin="1"/>
 <wire x1="96.52" y1="259.08" x2="106.68" y2="259.08" width="0.1524" layer="91"/>
@@ -7153,13 +7153,15 @@ http://www.weartronics.com/</description>
 <junction x="106.68" y="259.08"/>
 <pinref part="U$1" gate="G$1" pin="+VIN"/>
 <wire x1="106.68" y1="261.62" x2="106.68" y2="259.08" width="0.1524" layer="91"/>
-<pinref part="SW3" gate="G$1" pin="4"/>
-<wire x1="86.36" y1="259.08" x2="86.36" y2="256.54" width="0.1524" layer="91"/>
 <junction x="96.52" y="259.08"/>
-<pinref part="SW3" gate="G$1" pin="1"/>
-<wire x1="86.36" y1="241.3" x2="86.36" y2="238.76" width="0.1524" layer="91"/>
-<wire x1="86.36" y1="238.76" x2="96.52" y2="238.76" width="0.1524" layer="91"/>
 <wire x1="96.52" y1="238.76" x2="96.52" y2="259.08" width="0.1524" layer="91"/>
+<wire x1="96.52" y1="261.62" x2="81.28" y2="261.62" width="0.1524" layer="91"/>
+<pinref part="SW3" gate="G$1" pin="5"/>
+<wire x1="81.28" y1="261.62" x2="81.28" y2="256.54" width="0.1524" layer="91"/>
+<pinref part="SW3" gate="G$1" pin="2"/>
+<wire x1="81.28" y1="241.3" x2="81.28" y2="236.22" width="0.1524" layer="91"/>
+<wire x1="81.28" y1="236.22" x2="96.52" y2="236.22" width="0.1524" layer="91"/>
+<wire x1="96.52" y1="236.22" x2="96.52" y2="238.76" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$43" class="0">
@@ -7923,15 +7925,17 @@ http://www.weartronics.com/</description>
 <net name="N$81" class="0">
 <segment>
 <wire x1="81.28" y1="238.76" x2="66.04" y2="238.76" width="0.1524" layer="91"/>
-<pinref part="SW3" gate="G$1" pin="2"/>
-<wire x1="81.28" y1="241.3" x2="81.28" y2="238.76" width="0.1524" layer="91"/>
-<pinref part="SW3" gate="G$1" pin="5"/>
-<wire x1="81.28" y1="259.08" x2="81.28" y2="256.54" width="0.1524" layer="91"/>
 <wire x1="66.04" y1="259.08" x2="81.28" y2="259.08" width="0.1524" layer="91"/>
 <pinref part="D2" gate="G$1" pin="C"/>
 <wire x1="63.5" y1="259.08" x2="66.04" y2="259.08" width="0.1524" layer="91"/>
 <wire x1="66.04" y1="238.76" x2="66.04" y2="259.08" width="0.1524" layer="91"/>
 <junction x="66.04" y="259.08"/>
+<pinref part="SW3" gate="G$1" pin="4"/>
+<wire x1="81.28" y1="259.08" x2="86.36" y2="259.08" width="0.1524" layer="91"/>
+<wire x1="86.36" y1="259.08" x2="86.36" y2="256.54" width="0.1524" layer="91"/>
+<wire x1="81.28" y1="238.76" x2="86.36" y2="238.76" width="0.1524" layer="91"/>
+<pinref part="SW3" gate="G$1" pin="1"/>
+<wire x1="86.36" y1="238.76" x2="86.36" y2="241.3" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$36" class="0">

diff --git a/smartmic/SM1000-E/eagle.epf b/smartmic/SM1000-E/eagle.epf
index c894794fdc81a6bc24a6191931689deb0bd13721..84160ce00f140195691e1c8e7ea7aac006be50ab 100644 (file)
--- a/smartmic/SM1000-E/eagle.epf
+++ b/smartmic/SM1000-E/eagle.epf
@@ -394,7 +394,7 @@ UsedLibrary="C:/Users/rbarnich/My Projects/PIC32MZ/PIC32MZ.lbr"
 \r
 [Win_1]\r
 Type="Control Panel"\r
-Loc="939 45 1538 444"\r
+Loc="920 131 1519 530"\r
 State=2\r
 Number=0\r
 \r