Schematic & PCB changes RGB 09/24/14

author rickb44 <rickb44@01035d8c-6547-0410-b346-abe4f91aad63>

Wed, 24 Sep 2014 19:07:51 +0000 (19:07 +0000)

committer rickb44 <rickb44@01035d8c-6547-0410-b346-abe4f91aad63>

Wed, 24 Sep 2014 19:07:51 +0000 (19:07 +0000)
author rickb44 <rickb44@01035d8c-6547-0410-b346-abe4f91aad63>
Wed, 24 Sep 2014 19:07:51 +0000 (19:07 +0000)
committer rickb44 <rickb44@01035d8c-6547-0410-b346-abe4f91aad63>
Wed, 24 Sep 2014 19:07:51 +0000 (19:07 +0000)
diff --git a/smartmic/SM1000-C/Change-Log-C.txt b/smartmic/SM1000-C/Change-Log-C.txt

index 8cb0f90e3fe63c80668937bb3e5a7d868fe70d09..154dd649ba4c229cec70d7a83fa81089b19c86a4 100644 (file)
--- a/smartmic/SM1000-C/Change-Log-C.txt
+++ b/smartmic/SM1000-C/Change-Log-C.txt
@@ -1,4 +1,4 @@
-\r
+       \r
  Change Log for SM1000-REV-B2\r
  \r
  Changes 07/22/2014 Reformatted file to fit on Schematic.\r
@@ -6,32 +6,32 @@ Reformatted file to include Status: and status indicator.     RGB 09/15/14
  Status:        [ ] no action taken, [O] Resolved - PCB changes not made        [X] Complete, Schematic, PCb & BOM changes made, no firther action.\r
  ============================================================================================================================================\r
  \r
-1.  [O] SW3 holes not big enough.\r
+1.  [X] SW3 holes not big enough.\r
                 Hole is .5mm. Pin is .6mm. Hole should be 1.0mm per spec sheet.\r
         Status: Complete - Drill size changed to 1.0mm  9/1/14 RGB\r
  \r
-2.  [O] Is C26 rated at 25V in BOM? \r
+2.  [X] Is C26 rated at 25V in BOM? \r
                 C26 is 25V in schematic, 16V in BOM. \r
                 OOPS! C23, C26, C40 & C46 should all be 25V. Will change database & BOM.  \r
                 Murata # GRM188R71E104KA01D, Digikey # 490-1524-1-ND, Part Def: CAP CER 0.1UF 25V 10% X7R 0603\r
         Status: Complete - reflected in SM1000-C BOM    09/15/14 - RGB\r
                 \r
-3.  [O] LED8 takes up whole of pads so diff to solder \r
+3.  [X] LED8 takes up whole of pads so diff to solder \r
                 Corrected package for LED-LTST - LED5 & LED8.\r
         Status: Complete - new package in SM1000-C artwork.     09/15/14 - RGB\r
  \r
-4.  [O] Is CN3 a standard size?  My DC plugs don't fit in it   \r
+4.  [X] Is CN3 a standard size?  My DC plugs don't fit in it   \r
                 2.5mm ID, 5.5mm OD Plug. CONN PWR PLUG DC 2.5X5.5 8A MOD Digikey # \r
                 CP3-002BH-ND \r
                 Determined 2.1mm x 5.5mm most common size. \r
         Status: Complete - Changed CN3 to RASM722PX to accomodate 2.1mm x 5.5mm plug. In SM1000-C artwork.  RGB 09/14/14\r
  \r
-5.  [ ] couldn't solder bottom pad of U5 by hand      + hope it's OK \r
+5.  [X] couldn't solder bottom pad of U5 by hand      + hope it's OK \r
                 Attached to large gnd plane. Hard to solder. Designed for IR SMT \r
                 assembly. Try large iron on vias from bottom. \r
         Status: No Change. Part will solder in production. RGB 09/15/14\r
  \r
-6.  [ ] Can R6,R2,R5,R3,R4 be 10k to match R1? \r
+6.  [O] Can R6,R2,R5,R3,R4 be 10k to match R1? \r
                 Don't know if 10K will work for R6. Discovery has 680 or small value. \r
                 Try it. Can't hurt. \r
                 R2 & R5 Are I2C pins. Spec 4.7K\r
@@ -49,10 +49,10 @@ Status:     [ ] no action taken, [O] Resolved - PCB changes not made        [X] Complete, S
                 across PCB. \r
         Status: Complete. RGB 07/15/2014\r
  \r
-9.  [ ] What was Vin range meant to be? \r
+9.  [X] What was Vin range meant to be? \r
                 VIN is 1 diode drop lower than VEXT(6-16VDC) or approx 5.5 - 15.5VDC \r
                 Used to power LM386 to get more output swing.\r
-       Status: No Action Required - RGB 09/15/14\r
+       Status: cHANGED TO 2.1MM X 5.5MM - RGB 09/15/14\r
  \r
  10. [X] move R20 label close to R20     + I loaded R20 in the wrong place! \r
                 R20 designation moved adjacent to part.\r
@@ -91,20 +91,20 @@ Status:     [ ] no action taken, [O] Resolved - PCB changes not made        [X] Complete, S
                 tabs are plastic and don't extend thru the PCB, I am approving these 4 discrepancies.   \r
         Status: Complete        RGB 07/15.2014  \r
         \r
-16. [ ] Should R46 be described as a trimmer resistor (rather than POT?) on the BOM\r
+16. [X] Should R46 be described as a trimmer resistor (rather than POT?) on the BOM\r
                 R46 incorrectly specified on BOM. Corrected. Part s described as POT in DIGIKEY \r
                 description. \r
-       Status: No Action       RGB 07/15/2014\r
+       Status: POT     RGB 07/15/2014\r
         \r
  17. [X] Is label for R1 & R2 transposed? \r
                 Labels were transposed. Corrected. \r
         Status: Complete - RGB 07/15/2014\r
         \r
-18. [O] Add 100nF reset cap as per data sheet and discovery\r
+18. [X] Add 100nF reset cap as per data sheet and discovery\r
                 Added C48, 100nF cap across J5 to implement power up reset function. \r
         Status - Added to schematic & BOM, will implement on PCB        RGB 07/17/2014\r
         \r
-19. [O] replace J7 & J2 with 0805 0 ohm Rs\r
+19. [X] replace J7 & J2 with 0805 0 ohm Rs\r
                  Jumpers were originally inserted to permit bringing up SM1000 and protecting \r
                  circuitry from overvoltages and measuring currents. \r
                  Jumpers replaced with 0 OHM resistors. R18 & R21. \r
@@ -114,22 +114,22 @@ Status:   [ ] no action taken, [O] Resolved - PCB changes not made        [X] Complete, S
  \r
  ========= Latest change notes David 14 August ==========\r
  \r
-21. [O] R46 to 100k\r
+21. [X] R46 to 100k\r
                 [ ] add series R to prevent DAC distortion?\r
                 [ ] get to bottom on LM386 distortion?\r
         Status: Added to schematic & BOM. Will place on PCB RGB 09/15/14\r
         \r
-22. [O] Add 22k between DAC2 and ground\r
+22. [X] Add 22k between DAC2 and ground\r
                 + making R46 100k lead to some analog coupling between ADC2 and DAC2,\r
                 not qute sure why, this lowers Z of this net\r
         Status: Added to schematic & BOM. Will place on PCB RGB 09/15/14\r
                 \r
-23. [] R52 1k trimmer wasn't on my digikey order\r
+23. [X] R52 1k trimmer wasn't on my digikey order\r
                 + probably my mistake, but check BOM\r
                 Is in BOM \r
         Status: No Action       RGB 9/8/14\r
         \r
-24.    [O] C36 is along way away from U6\r
+24.    [X] C36 is along way away from U6\r
      + poss to move closer?     \r
    Status:       Cap moved to staging area. Will be moved closer during re-layout. RGB 9/8/14\r
    \r
@@ -138,17 +138,17 @@ Status:   [ ] no action taken, [O] Resolved - PCB changes not made        [X] Complete, S
         Data sheet calls for 2.2K, not 22.1K. Changed schematic & BOM. \r
         Status: Complete - Changed on schematic & BOM No PCB action necessary.  RGB 9/8/14\r
      \r
-26.    [O] Idea - clear labels next to each trimmers in large font\r
+26.    [X] Idea - clear labels next to each trimmers in large font\r
      + and connectors and TP, hard to see with naked eye\r
-       Status: Will enlarge during re-layout. RGB 9/8/14\r
+       Status: ENLARGED TO 1.016MM. RGB 9/8/14\r
      \r
-27.    [] foot print for a small reset button\r
+27.    [X] foot print for a small reset button\r
      + I press it a lot, gd for experimenting\r
         J25 was added for external reset switch. Do you still want on board sw?\r
-    Status No Action Taken Yet RGB 09/15/14\r
+    Status: HEADER PROVIDED RGB 09/15/14\r
      \r
-28.    [O] 1nF to filter noise across 500k R42 but very close to op-amp.\r
-       Status: Added to schematic & BOM,  will be placed in re-layout. RGB 9/8/14.\r
+28.    [X] 1nF to filter noise across 500k R42 but very close to op-amp.\r
+       Status: Added. Correct placement? RGB 9/8/14.\r
  \r
  29.    [O] highly senstive net between R53 and R42 should be shorter if possible, \r
      as we are getting a lot of noise pick up.\r
@@ -163,9 +163,9 @@ Status:     [ ] no action taken, [O] Resolved - PCB changes not made        [X] Complete, S
         Good idea. Will do in re-layout.\r
         Status: will reposition during re-layout RGB 09/15/14\r
         \r
-32.    [O] Idea - clear labels next to each trimmers in large font\r
+32.    [X] Idea - clear labels next to each trimmers in large font\r
      + and connectors\r
-       Status: WIll perform during re-layout  RGB 09/15/14\r
+       Status: Same as #26 RGB 09/15/14\r
         \r
  ================================================================\r
  renumber to correct for duplicate #31 RGB 9/8/14\r
@@ -206,16 +206,16 @@ renumber to correct for duplicate #31 RGB 9/8/14
         Your choice. Daryl felt 3D -> metal not good solution.\r
         Status: No Action TAken RGB 09/15/14\r
      \r
-41.    [] should square pad on Mic be gnd side?\r
+41.    [X] should square pad on Mic be gnd side?\r
         Mic data sheet referred to term 1(amp out) and term 2 GND. That's the way I laid it out.\r
         I see your point though, change would aid assembly.\r
-       Status: Will change part footprint & PCB.\r
+       Status: Footprint changed. \r
  \r
-42.    [] added 3.9nF between U8 p3 and ground \r
+42.    [X] added 3.9nF between U8 p3 and ground \r
      + removed some tonal noise and \r
      Status:    No action taken - What is 3n9?  Will add.\r
      \r
-43.    [] changed R39 to 2k2\r
+43.    [X] changed R39 to 2k2\r
      + mic bias now 2.8V\r
         Status: No Action Taken, Same as #25 RGB 09/10/14\r
      \r
@@ -237,12 +237,12 @@ renumber to correct for duplicate #31 RGB 9/8/14
                 WIll move at re-route time. \r
         Status: WIll move in PCB re-layout. RGB 09/10/14\r
         \r
-47.    [O] C40 should be 47nF\r
+47.    [X] C40 should be 47nF\r
      + David used wrong value on prototype\r
                 Changed to 47nF.   See Questions\r
      Status:    Schematic & BOM changed. NO effect on PCB.      RGB 9/10/14\r
      \r
-48.    [O] LD2 opto-isolator footprint wrong (or maybe I ordered wrong part) \r
+48.    [X] LD2 opto-isolator footprint wrong (or maybe I ordered wrong part) \r
                 My mistake. Part is 8mm pin to pin, not 6mm.\r
         Status: Will correct footprint & PCB RGB 9/10/14\r
                 \r
@@ -257,12 +257,12 @@ renumber to correct for duplicate #31 RGB 9/8/14
                 Location of PTT sw fits hand. Current sw is small. Might be able to use another switch. Do you really want push-push? Will look at larger pads pending question resolution. RGB 9/10/14\r
     Status:     esearching larger switch.       RGB 09/15/14\r
     \r
-51.    [O] CN12 is hard to solder manually, need larger mechanical pads\r
+51.    [X] CN12 is hard to solder manually, need larger mechanical pads\r
      + although this would increase the outline so maybe not a problem\r
-       Status: I'll extend pads, if I can.  RGB 9/10/14\r
+       Status: Changed  RGB 9/24/14\r
      \r
-52.    [O] CN2 difficult to hand solder, extend padds back towards outline\r
-       Status: I'll extend pads, if I can. RGB 9/10/14\r
+52.    [X] CN2 difficult to hand solder, extend padds back towards outline\r
+       Status: Extended  RGB 09/24/14\r
  \r
  53. [X] Replace R9 with a bead or inductor.\r
                 Replaced R9 with Taiyo Yuden CBC3225T101MR inductor. RGB 09/11/14\r
diff --git a/smartmic/SM1000-C/SM1000-C.brd b/smartmic/SM1000-C/SM1000-C.brd

index 7c2f7518809ddf2ba1ef3b0301ab08dca667d830..6969afa87a1cad27d6b62ce63f80893c1b9c46a8 100644 (file)
--- a/smartmic/SM1000-C/SM1000-C.brd
+++ b/smartmic/SM1000-C/SM1000-C.brd
@@ -23,17 +23,17 @@
  <layer number="13" name="Route13" color="4" fill="5" visible="no" active="no"/>
  <layer number="14" name="Route14" color="1" fill="6" visible="no" active="no"/>
  <layer number="15" name="VDD" color="6" fill="1" visible="no" active="yes"/>
-<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
+<layer number="16" name="Bottom" color="1" fill="1" visible="no" active="yes"/>
  <layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
  <layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
-<layer number="19" name="Unrouted" color="6" fill="1" visible="no" active="yes"/>
+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
  <layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
-<layer number="21" name="tPlace" color="7" fill="1" visible="no" active="yes"/>
-<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="23" name="tOrigins" color="15" fill="1" visible="no" active="yes"/>
-<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
-<layer number="25" name="tNames" color="7" fill="1" visible="no" active="yes"/>
-<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="22" name="bPlace" color="7" fill="1" visible="no" active="yes"/>
+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="24" name="bOrigins" color="15" fill="1" visible="no" active="yes"/>
+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="26" name="bNames" color="7" fill="1" visible="no" active="yes"/>
  <layer number="27" name="tValues" color="7" fill="1" visible="no" active="yes"/>
  <layer number="28" name="bValues" color="7" fill="1" visible="no" active="yes"/>
  <layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
@@ -1515,29 +1515,21 @@ INFINEON, www.infineon.com/cmc_upload/0/000/010/257/eh_db_5b.pdf</description>
  <wire x1="8.5" y1="-3" x2="-6" y2="-3" width="0" layer="39"/>
  <wire x1="-6" y1="-3" x2="-6" y2="3" width="0" layer="39"/>
  </package>
-<package name="SMD4">
-<description>&lt;b&gt;SMD 4&lt;/b&gt;&lt;p&gt;
-Source: http://www.vishay.com/docs/83673/sfh618.pdf</description>
-<wire x1="2.315" y1="1.98" x2="2.315" y2="-1.98" width="0.1524" layer="21"/>
-<wire x1="-2.315" y1="-0.585" x2="-2.315" y2="1.98" width="0.1524" layer="21"/>
-<wire x1="-2.315" y1="1.98" x2="2.315" y2="1.98" width="0.1524" layer="51"/>
-<wire x1="2.315" y1="-1.98" x2="-2.315" y2="-1.98" width="0.1524" layer="51"/>
-<wire x1="-2.315" y1="-1.63" x2="-2.315" y2="-0.585" width="0.1524" layer="21" curve="180"/>
-<wire x1="-2.315" y1="-1.98" x2="-2.315" y2="-1.63" width="0.1524" layer="21"/>
-<wire x1="-2.315" y1="-1.63" x2="-2.315" y2="-0.585" width="0.1524" layer="21"/>
-<smd name="1" x="-1.27" y="-3" dx="1.5" dy="1.3" layer="1"/>
-<smd name="2" x="1.27" y="-3" dx="1.5" dy="1.3" layer="1"/>
-<smd name="3" x="1.27" y="3" dx="1.5" dy="1.3" layer="1" rot="R180"/>
-<smd name="4" x="-1.27" y="3" dx="1.5" dy="1.3" layer="1" rot="R180"/>
-<text x="-3" y="-2.5" size="1" layer="25" ratio="10" rot="R90">&gt;NAME</text>
-<rectangle x1="-1.651" y1="-3.425" x2="-0.889" y2="-2.7" layer="51"/>
-<rectangle x1="0.889" y1="-3.425" x2="1.651" y2="-2.7" layer="51"/>
-<rectangle x1="0.889" y1="2.7" x2="1.651" y2="3.425" layer="51" rot="R180"/>
-<rectangle x1="-1.651" y1="2.7" x2="-0.889" y2="3.425" layer="51" rot="R180"/>
-<wire x1="-2.7" y1="4.3" x2="2.7" y2="4.3" width="0" layer="39"/>
-<wire x1="2.7" y1="4.3" x2="2.7" y2="-4.3" width="0" layer="39"/>
-<wire x1="2.7" y1="-4.3" x2="-2.7" y2="-4.3" width="0" layer="39"/>
-<wire x1="-2.7" y1="-4.3" x2="-2.7" y2="4.3" width="0" layer="39"/>
+<package name="LTV-817S">
+<smd name="4" x="-1.5" y="5" dx="2.5" dy="2" layer="1" rot="R90"/>
+<smd name="1" x="-1.5" y="-5" dx="2.5" dy="2" layer="1" rot="R90"/>
+<smd name="2" x="1.5" y="-5" dx="2.5" dy="2" layer="1" rot="R90"/>
+<smd name="3" x="1.5" y="5" dx="2.5" dy="2" layer="1" rot="R90"/>
+<wire x1="-2.5" y1="-3" x2="-2.5" y2="3" width="0.15" layer="21"/>
+<wire x1="-2.5" y1="3" x2="2.5" y2="3" width="0.15" layer="21"/>
+<wire x1="2.5" y1="3" x2="2.5" y2="-3" width="0.15" layer="21"/>
+<wire x1="2.5" y1="-3" x2="-2.5" y2="-3" width="0.15" layer="21"/>
+<circle x="-1.5" y="-2" radius="0.728009375" width="0" layer="21"/>
+<text x="-2.5" y="7" size="1" layer="21" ratio="10">&gt;NAME</text>
+<wire x1="-3" y1="7" x2="3" y2="7" width="0" layer="39"/>
+<wire x1="3" y1="7" x2="3" y2="-7" width="0" layer="39"/>
+<wire x1="3" y1="-7" x2="-3" y2="-7" width="0" layer="39"/>
+<wire x1="-3" y1="-7" x2="-3" y2="7" width="0" layer="39"/>
  </package>
  <package name="RASM722PX">
  <smd name="1" x="-7.19" y="-0.24" dx="6.35" dy="3.81" layer="1" rot="R90"/>
@@ -1690,8 +1682,8 @@ NS Package M08A</description>
  </package>
  <package name="CMA-4544PF-W">
  <circle x="0" y="0" radius="4.8" width="0.15" layer="21"/>
-<pad name="1" x="-2" y="1.27" drill="1.2" shape="square"/>
-<pad name="2" x="-2" y="-1.27" drill="1.2" diameter="1.9304"/>
+<pad name="2" x="-2" y="1.27" drill="1.2" shape="square"/>
+<pad name="1" x="-2" y="-1.27" drill="1.2" diameter="1.9304"/>
  <text x="-2.5" y="6" size="1" layer="25" ratio="10">&gt;NAME</text>
  <circle x="0" y="0" radius="5.59016875" width="0.01" layer="39"/>
  </package>
@@ -1978,11 +1970,11 @@ by exp-lbrs.ulp</description>
  <text x="-8.5" y="-10.5" size="1" layer="25" ratio="10">&gt;VALUE</text>
  </package>
  <package name="MOLEX-MINI-B-SMT">
-<smd name="1" x="-1.6" y="6.225" dx="2.25" dy="0.5" layer="1" rot="R90"/>
-<smd name="2" x="-0.8" y="6.225" dx="2.25" dy="0.5" layer="1" rot="R90"/>
-<smd name="3" x="0" y="6.225" dx="2.25" dy="0.5" layer="1" rot="R90"/>
-<smd name="4" x="0.8" y="6.225" dx="2.25" dy="0.5" layer="1" rot="R90"/>
-<smd name="5" x="1.6" y="6.225" dx="2.25" dy="0.5" layer="1" rot="R90"/>
+<smd name="1" x="-1.6" y="6.75" dx="3.25" dy="0.5" layer="1" rot="R90"/>
+<smd name="2" x="-0.8" y="6.75" dx="3.25" dy="0.5" layer="1" rot="R90"/>
+<smd name="3" x="0" y="6.75" dx="3.25" dy="0.5" layer="1" rot="R90"/>
+<smd name="4" x="0.8" y="6.75" dx="3.25" dy="0.5" layer="1" rot="R90"/>
+<smd name="5" x="1.6" y="6.75" dx="3.25" dy="0.5" layer="1" rot="R90"/>
  <smd name="6" x="-5.5" y="6.25" dx="3.5" dy="2.05" layer="1" rot="R90"/>
  <smd name="7" x="5.5" y="6.25" dx="3.5" dy="2.05" layer="1" rot="R90"/>
  <smd name="8" x="-5.5" y="2" dx="4" dy="2.05" layer="1" rot="R90"/>
@@ -2005,9 +1997,9 @@ by exp-lbrs.ulp</description>
  <wire x1="-4" y1="-0.5" x2="-7" y2="-0.5" width="0" layer="39"/>
  <wire x1="-7" y1="-0.5" x2="-7" y2="8.5" width="0" layer="39"/>
  <text x="-6.5" y="9" size="1" layer="21" ratio="10">&gt;NAME</text>
-<wire x1="-4" y1="0" x2="-4" y2="8.5" width="0.15" layer="21"/>
-<wire x1="-4" y1="8.5" x2="4" y2="8.5" width="0.15" layer="21"/>
-<wire x1="4" y1="8.5" x2="4" y2="0" width="0.15" layer="21"/>
+<wire x1="-4" y1="0" x2="-4" y2="9" width="0.15" layer="21"/>
+<wire x1="-4" y1="9" x2="4" y2="9" width="0.15" layer="21"/>
+<wire x1="4" y1="9" x2="4" y2="0" width="0.15" layer="21"/>
  </package>
  <package name="C1210">
  <wire x1="-2.35" y1="-1.6" x2="-2.35" y2="1.6" width="0" layer="39"/>
@@ -2028,22 +2020,22 @@ by exp-lbrs.ulp</description>
  <rectangle x1="1.095" y1="-1.25" x2="1.6" y2="1.25" layer="51"/>
  </package>
  <package name="HRS-DF11-16DS">
-<pad name="1" x="-1" y="7" drill="0.8" shape="square"/>
-<pad name="2" x="-1" y="5" drill="0.8"/>
-<pad name="3" x="-1" y="3" drill="0.8"/>
-<pad name="4" x="-1" y="1" drill="0.8"/>
-<pad name="5" x="-1" y="-1" drill="0.8"/>
-<pad name="6" x="-1" y="-3" drill="0.8"/>
-<pad name="7" x="-1" y="-5" drill="0.8"/>
-<pad name="8" x="-1" y="-7" drill="0.8"/>
-<pad name="9" x="1" y="-7" drill="0.8"/>
-<pad name="10" x="1" y="-5" drill="0.8"/>
-<pad name="11" x="1" y="-3" drill="0.8"/>
-<pad name="12" x="1" y="-1" drill="0.8"/>
-<pad name="13" x="1" y="1" drill="0.8"/>
-<pad name="14" x="1" y="3" drill="0.8"/>
-<pad name="15" x="1" y="5" drill="0.8"/>
-<pad name="16" x="1" y="7" drill="0.8"/>
+<pad name="1" x="-1" y="7" drill="0.8" diameter="1.4224" shape="square"/>
+<pad name="2" x="-1" y="5" drill="0.8" diameter="1.4224"/>
+<pad name="3" x="-1" y="3" drill="0.8" diameter="1.4224"/>
+<pad name="4" x="-1" y="1" drill="0.8" diameter="1.4224"/>
+<pad name="5" x="-1" y="-1" drill="0.8" diameter="1.4224"/>
+<pad name="6" x="-1" y="-3" drill="0.8" diameter="1.4224"/>
+<pad name="7" x="-1" y="-5" drill="0.8" diameter="1.4224"/>
+<pad name="8" x="-1" y="-7" drill="0.8" diameter="1.4224"/>
+<pad name="9" x="1" y="-7" drill="0.8" diameter="1.4224"/>
+<pad name="10" x="1" y="-5" drill="0.8" diameter="1.4224"/>
+<pad name="11" x="1" y="-3" drill="0.8" diameter="1.4224"/>
+<pad name="12" x="1" y="-1" drill="0.8" diameter="1.4224"/>
+<pad name="13" x="1" y="1" drill="0.8" diameter="1.4224"/>
+<pad name="14" x="1" y="3" drill="0.8" diameter="1.4224"/>
+<pad name="15" x="1" y="5" drill="0.8" diameter="1.4224"/>
+<pad name="16" x="1" y="7" drill="0.8" diameter="1.4224"/>
  <wire x1="-2.5" y1="9" x2="-2.5" y2="-9" width="0.15" layer="21"/>
  <wire x1="-2.5" y1="-9" x2="2.5" y2="-9" width="0.15" layer="21"/>
  <wire x1="2.5" y1="-9" x2="2.5" y2="9" width="0.15" layer="21"/>
@@ -2776,7 +2768,7 @@ design rules under a new name.</description>
  <attribute name="NAME" x="18.75" y="78.4" size="0.8128" layer="25" rot="R90"/>
  </element>
  <element name="R46" library="_RoweTel" package="POT-3310C" value="100K" x="55.43" y="88.99" locked="yes" smashed="yes" rot="R90">
-<attribute name="NAME" x="48.14" y="88.17" size="0.8128" layer="25" ratio="10"/>
+<attribute name="NAME" x="47.14" y="87.67" size="1.016" layer="25" ratio="10"/>
  </element>
  <element name="SW3" library="_RoweTel" package="SW-PWR" value="DPDT" x="6" y="71" locked="yes" smashed="yes" rot="R90">
  <attribute name="NAME" x="3.2" y="80.2" size="0.8128" layer="25" ratio="10"/>
@@ -2846,12 +2838,8 @@ design rules under a new name.</description>
  <element name="CN7" library="_RoweTel" package="MJ-3523-SMT" value="MJ-3523-SMT" x="61" y="8" smashed="yes" rot="MR270">
  <attribute name="NAME" x="56.5" y="5" size="1" layer="26" ratio="10" rot="MR90"/>
  </element>
-<element name="CN12" library="SM1000" package="HRS-DF11-16DS" value="DF11-16DS" x="27.49" y="23.87" locked="yes" smashed="yes" rot="R90">
-<attribute name="VALUE" x="28.125" y="17.52" size="1.27" layer="27" ratio="10" rot="R90"/>
-<attribute name="NAME" x="21.443" y="20.956" size="0.8128" layer="25" ratio="10" rot="R180"/>
-</element>
-<element name="LD2" library="_RoweTel" package="SMD4" value="LTV-817S" x="52" y="23" smashed="yes" rot="R270">
-<attribute name="NAME" x="53.6" y="20.3" size="0.8128" layer="25" ratio="10" rot="R180"/>
+<element name="LD2" library="_RoweTel" package="LTV-817S" value="LTV-817S" x="72.5" y="23" smashed="yes" rot="R270">
+<attribute name="NAME" x="74.1" y="20.3" size="0.8128" layer="25" ratio="10" rot="R180"/>
  </element>
  <element name="R51" library="AA-ipc-7351-resistor" package="RESC1608X55N" value="390,1%" x="50.5" y="27.5" locked="yes" smashed="yes">
  <attribute name="NAME" x="49" y="28.5" size="0.8128" layer="25"/>
@@ -2904,15 +2892,15 @@ design rules under a new name.</description>
  <element name="C36" library="SM1000" package="C1210" value="100uF,10V" x="67.6" y="58" smashed="yes" rot="R270">
  <attribute name="NAME" x="66.3" y="60.95" size="0.8128" layer="25" ratio="10"/>
  </element>
-<element name="CN2" library="SM1000" package="MOLEX-MINI-B-SMT" value="MOLEX-MINI-B-SMT" x="39.5" y="89.5" locked="yes" smashed="yes" rot="MR180">
+<element name="CN2" library="SM1000" package="MOLEX-MINI-B-SMT" value="MOLEX-MINI-B-SMT" x="39.5" y="89.5" smashed="yes" rot="MR180">
  <attribute name="NAME" x="44" y="80.75" size="1" layer="26" ratio="10" rot="MR180"/>
  </element>
  <element name="PCB1" library="_Coherix" package="NOPACKAGE" value="SM1000A" x="2.5" y="-0.5" locked="yes" smashed="yes"/>
  <element name="R47" library="_RoweTel" package="TRIMPOT91" value="500" x="59" y="34" locked="yes" smashed="yes">
-<attribute name="NAME" x="62" y="38.5" size="0.8128" layer="25" ratio="10"/>
+<attribute name="NAME" x="58" y="39" size="1.016" layer="25" ratio="10"/>
  </element>
  <element name="R52" library="_RoweTel" package="TRIMPOT91" value="1K" x="59" y="57" locked="yes" smashed="yes">
-<attribute name="NAME" x="62.5" y="61.5" size="0.8128" layer="25" ratio="10"/>
+<attribute name="NAME" x="58" y="62" size="1.016" layer="25" ratio="10"/>
  </element>
  <element name="C22" library="AA-ipc-7351-capacitor" package="CAPC1608X92N" value="100nF,16V" x="49.5" y="47.75" locked="yes" smashed="yes" rot="R90">
  <attribute name="NAME" x="48.45" y="46.5" size="0.8128" layer="25" ratio="10" rot="R90"/>
@@ -3004,7 +2992,7 @@ design rules under a new name.</description>
  <attribute name="NAME" x="40.45" y="50.55" size="0.8128" layer="25" rot="R90"/>
  </element>
  <element name="R42" library="_RoweTel" package="TRIMPOT91" value="500K" x="59" y="45.5" locked="yes" smashed="yes">
-<attribute name="NAME" x="62" y="50" size="0.8128" layer="21" ratio="10"/>
+<attribute name="NAME" x="57.5" y="50.5" size="1.016" layer="21" ratio="10"/>
  </element>
  <element name="R53" library="AA-ipc-7351-resistor" package="RESC1608X55N" value="2.2K,1%" x="38.5" y="47.75" locked="yes" smashed="yes" rot="R270">
  <attribute name="NAME" x="37.611" y="46.611" size="0.8128" layer="25" rot="R90"/>
@@ -3163,10 +3151,16 @@ design rules under a new name.</description>
  <element name="CN6" library="_RoweTel" package="SJ-3524-SMT" value="SJ-3524-SMT" x="43" y="7" smashed="yes" rot="MR270">
  <attribute name="NAME" x="39" y="7.5" size="1" layer="26" ratio="10" rot="MR270"/>
  </element>
-<element name="P21" library="_Coherix" package="PAD070-035" value="PAD070-035" x="-29" y="-47"/>
-<element name="P22" library="_Coherix" package="PAD070-035" value="PAD070-035" x="-29" y="-51.5"/>
-<element name="P23" library="_Coherix" package="PAD070-035" value="PAD070-035" x="-29" y="-56"/>
-<element name="P24" library="_Coherix" package="PAD070-035" value="PAD070-035" x="-29" y="-60.5"/>
+<element name="P21" library="_Coherix" package="PAD070-035" value="PAD070-035" x="-13.5" y="35"/>
+<element name="P22" library="_Coherix" package="PAD070-035" value="PAD070-035" x="-13.5" y="30.5"/>
+<element name="P23" library="_Coherix" package="PAD070-035" value="PAD070-035" x="-13.5" y="26"/>
+<element name="P24" library="_Coherix" package="PAD070-035" value="PAD070-035" x="-13.5" y="21.5"/>
+<element name="C55" library="AA-ipc-7351-capacitor" package="CAPC1608X92N" value="1nF,16V" x="-14" y="18"/>
+<element name="C56" library="AA-ipc-7351-capacitor" package="CAPC1608X92N" value="1nF,16V" x="-14" y="14.5"/>
+<element name="R9" library="AA-ipc-7351-resistor" package="RESC1608X55N" value="1.5K,1%" x="-14" y="9.5"/>
+<element name="R29" library="AA-ipc-7351-resistor" package="RESC1608X55N" value="1.5K,1%" x="-14" y="4.5"/>
+<element name="C57" library="AA-ipc-7351-capacitor" package="CAPC1608X92N" value="" x="-29.5" y="-45.5"/>
+<element name="CN12" library="SM1000" package="HRS-DF11-16DS" value="HRS-DF11-16DS" x="27.49" y="23.87" rot="R270"/>
  </elements>
  <signals>
  <signal name="N$2">
@@ -3358,10 +3352,10 @@ design rules under a new name.</description>
  <wire x1="60.58" y1="8" x2="63" y2="6" width="0.2" layer="2"/>
  <contactref element="R18" pad="2"/>
  <contactref element="P21" pad="1"/>
-<wire x1="-6" y1="44.2" x2="-29" y2="-47" width="0" layer="19" extent="1-1"/>
-<wire x1="-2.5" y1="44.05" x2="-6" y2="44.2" width="0" layer="19" extent="1-1"/>
-<wire x1="1.34" y1="62.27" x2="-2.5" y2="44.05" width="0" layer="19" extent="1-1"/>
-<wire x1="24.13" y1="44.45" x2="22.2" y2="51.7" width="0" layer="19" extent="1-2"/>
+<wire x1="22.2" y1="51.7" x2="24.13" y2="44.45" width="0" layer="19" extent="1-2"/>
+<wire x1="-2.5" y1="44.05" x2="1.34" y2="62.27" width="0" layer="19" extent="1-1"/>
+<wire x1="-6" y1="44.2" x2="-2.5" y2="44.05" width="0" layer="19" extent="1-1"/>
+<wire x1="-13.5" y1="35" x2="-6" y2="44.2" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="BOOT1">
  <contactref element="R6" pad="2"/>
@@ -3458,8 +3452,8 @@ design rules under a new name.</description>
  <wire x1="45" y1="83.25" x2="43.75" y2="83.25" width="0.6" layer="16"/>
  <wire x1="43.75" y1="83.25" x2="42.5" y2="82" width="0.6" layer="16"/>
  <via x="42.5" y="82" extent="1-16" drill="0.7" diameter="1.27"/>
-<wire x1="41.1" y1="83.275" x2="41.725" y2="83.275" width="0.4" layer="16"/>
-<wire x1="41.725" y1="83.275" x2="42.5" y2="82.5" width="0.4" layer="16"/>
+<wire x1="41.1" y1="82.75" x2="41.725" y2="83.275" width="0" layer="19" extent="1-16"/>
+<wire x1="41.725" y1="83.275" x2="42.5" y2="82.5" width="0" layer="19" extent="1-16"/>
  <wire x1="42.5" y1="82.5" x2="42.5" y2="82" width="0.4" layer="16"/>
  <contactref element="XTAL1" pad="4"/>
  <contactref element="XTAL1" pad="2"/>
@@ -3665,13 +3659,13 @@ design rules under a new name.</description>
  <wire x1="40.4" y1="59.8" x2="43.1" y2="59.8" width="1" layer="16"/>
  <contactref element="C49" pad="2"/>
  <contactref element="P22" pad="1"/>
-<wire x1="3.07" y1="6.26" x2="-29" y2="-51.5" width="0" layer="19" extent="1-1"/>
+<wire x1="19.2" y1="56.25" x2="15.2" y2="55.8" width="0" layer="19" extent="1-1"/>
+<wire x1="-5.7" y1="58" x2="2.5" y2="49.75" width="0" layer="19" extent="1-1"/>
+<wire x1="-13.5" y1="30.5" x2="1.9" y2="39.5" width="0" layer="19" extent="1-1"/>
+<wire x1="3" y1="10.7" x2="12.25" y2="31.25" width="0" layer="19" extent="1-1"/>
  <wire x1="2.31" y1="7.26" x2="3" y2="6.33" width="0" layer="19" extent="1-1"/>
  <wire x1="15.6" y1="7.26" x2="16.36" y2="6.26" width="0" layer="19" extent="1-1"/>
  <wire x1="12.4" y1="2.4" x2="11" y2="6" width="0" layer="19" extent="1-16"/>
-<wire x1="12.25" y1="31.25" x2="3" y2="10.7" width="0" layer="19" extent="1-1"/>
-<wire x1="15.2" y1="55.8" x2="19.2" y2="56.25" width="0" layer="19" extent="1-1"/>
-<wire x1="-5.7" y1="58" x2="2.5" y2="49.75" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="NRST">
  <contactref element="U1" pad="14"/>
@@ -3781,34 +3775,17 @@ design rules under a new name.</description>
  </signal>
  <signal name="AIN1">
  <contactref element="U1" pad="24"/>
-<contactref element="U6" pad="4"/>
-<wire x1="51.05" y1="64.3" x2="51" y2="64.25" width="0.2" layer="1"/>
-<wire x1="51" y1="64.25" x2="51" y2="63" width="0.2" layer="1"/>
-<contactref element="P1" pad="1"/>
  <wire x1="34" y1="58.25" x2="34" y2="59" width="0.2" layer="1"/>
  <wire x1="34" y1="59" x2="33.8" y2="59.2" width="0.2" layer="1"/>
-<wire x1="48.5" y1="57.5" x2="50.5" y2="57.5" width="0.2" layer="1"/>
-<wire x1="50.5" y1="57.5" x2="51" y2="58" width="0.2" layer="1"/>
-<wire x1="51" y1="58" x2="51" y2="59.5" width="0.2" layer="1"/>
-<wire x1="51" y1="59.5" x2="51" y2="63" width="0.2" layer="1"/>
-<wire x1="31.5" y1="60.5" x2="32.6" y2="59.4" width="0.2" layer="16"/>
-<wire x1="32.6" y1="59.4" x2="34.4" y2="59.4" width="0.2" layer="16"/>
-<via x="46.1" y="58.5" extent="1-16" drill="0.4" diameter="0.8"/>
-<wire x1="48" y1="57.5" x2="48.5" y2="57.5" width="0.2" layer="1"/>
-<wire x1="34.4" y1="59.4" x2="35.3" y2="58.5" width="0.2" layer="16"/>
  <wire x1="33.8" y1="59.2" x2="33.6" y2="59.4" width="0.2" layer="1"/>
  <wire x1="33.6" y1="59.4" x2="32.9" y2="59.4" width="0.2" layer="1"/>
  <wire x1="32.9" y1="59.4" x2="32.6" y2="59.4" width="0.2" layer="1"/>
-<wire x1="32.6" y1="59.4" x2="31.5" y2="60.5" width="0.2" layer="1"/>
-<wire x1="48" y1="57.5" x2="47.1" y2="57.5" width="0.2" layer="1"/>
-<wire x1="47.1" y1="57.5" x2="46.1" y2="58.5" width="0.2" layer="1"/>
-<wire x1="39.7" y1="58.1" x2="45" y2="58.1" width="0.2" layer="16"/>
-<wire x1="45" y1="58.1" x2="45.7" y2="58.1" width="0.2" layer="16"/>
-<wire x1="45.7" y1="58.1" x2="46.1" y2="58.5" width="0.2" layer="16"/>
-<wire x1="35.3" y1="58.5" x2="35.7" y2="58.1" width="0.2" layer="16"/>
-<wire x1="35.7" y1="58.1" x2="39.7" y2="58.1" width="0.2" layer="16"/>
-<contactref element="R23" pad="1"/>
-<wire x1="51.05" y1="64.3" x2="70.7" y2="64" width="0" layer="19" extent="1-1"/>
+<contactref element="C56" pad="1"/>
+<contactref element="R9" pad="1"/>
+<contactref element="P1" pad="1"/>
+<wire x1="31.5" y1="60.5" x2="32.6" y2="59.4" width="0" layer="19" extent="1-1"/>
+<wire x1="-14.8" y1="14.5" x2="31.5" y2="60.5" width="0" layer="19" extent="1-1"/>
+<wire x1="-14.8" y1="9.5" x2="-14.8" y2="14.5" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="+3.3V">
  <contactref element="U2" pad="5"/>
@@ -4021,7 +3998,7 @@ design rules under a new name.</description>
  <wire x1="38.75" y1="78.75" x2="38.5" y2="79" width="0.2" layer="1"/>
  <via x="38.5" y="79" extent="1-16" drill="0.4" diameter="0.5"/>
  <wire x1="38.5" y1="79" x2="39.5" y2="80" width="0.2" layer="16"/>
-<wire x1="39.5" y1="80" x2="39.5" y2="83.275" width="0.2" layer="16"/>
+<wire x1="39.5" y1="80" x2="39.5" y2="82.75" width="0.2" layer="16"/>
  <via x="24.5" y="79.5" extent="1-16" drill="0.4" diameter="0.8"/>
  <wire x1="38.5" y1="79" x2="38.5" y2="78" width="0.2" layer="16"/>
  <wire x1="38.5" y1="78" x2="38" y2="77.5" width="0.2" layer="16"/>
@@ -4039,7 +4016,7 @@ design rules under a new name.</description>
  <contactref element="CN2" pad="2"/>
  <wire x1="39.75" y1="78.25" x2="38.75" y2="78.25" width="0.2" layer="1"/>
  <via x="37.7" y="78.2" extent="1-16" drill="0.4" diameter="0.5"/>
-<wire x1="38.7" y1="83.275" x2="38.7" y2="80.7" width="0.2" layer="16"/>
+<wire x1="38.7" y1="82.75" x2="38.7" y2="80.7" width="0.2" layer="16"/>
  <wire x1="37.5" y1="79.5" x2="37.5" y2="78.5" width="0.2" layer="16"/>
  <via x="26.7" y="79.4" extent="1-16" drill="0.4" diameter="0.8"/>
  <wire x1="26" y1="79" x2="26" y2="78.3" width="0.2" layer="1"/>
@@ -4061,7 +4038,7 @@ design rules under a new name.</description>
  <contactref element="U4" pad="B3"/>
  <via x="36.5" y="83.5" extent="1-16" drill="0.4"/>
  <wire x1="36.5" y1="83.5" x2="36.725" y2="83.275" width="0.2" layer="16"/>
-<wire x1="36.725" y1="83.275" x2="37.9" y2="83.275" width="0.2" layer="16"/>
+<wire x1="36.725" y1="83.275" x2="37.9" y2="82.75" width="0" layer="19" extent="1-16"/>
  <wire x1="40.75" y1="79.25" x2="42.75" y2="79.25" width="0.2" layer="1"/>
  <via x="43" y="79.5" extent="1-16" drill="0.4" diameter="0.5"/>
  <wire x1="30.75" y1="83.85" x2="36.15" y2="83.85" width="0.2" layer="1"/>
@@ -4094,9 +4071,9 @@ design rules under a new name.</description>
  <wire x1="40.75" y1="79.75" x2="41.75" y2="79.75" width="0.2" layer="1"/>
  <wire x1="41.75" y1="79.75" x2="42" y2="80" width="0.2" layer="1"/>
  <via x="42" y="80" extent="1-16" drill="0.4" diameter="0.5"/>
-<wire x1="40.3" y1="83.275" x2="40.3" y2="81.7" width="0.2" layer="16"/>
-<wire x1="40.3" y1="81.7" x2="42" y2="80" width="0.2" layer="16"/>
-<wire x1="40.3" y1="83.275" x2="40.3" y2="85.05" width="0.2" layer="16"/>
+<wire x1="40.3" y1="82.75" x2="40.3" y2="81.7" width="0.2" layer="16"/>
+<wire x1="40.3" y1="81.7" x2="42" y2="80" width="0" layer="19" extent="1-16"/>
+<wire x1="40.3" y1="82.75" x2="40.3" y2="85.05" width="0.2" layer="16"/>
  <via x="27" y="83" extent="1-16" drill="0.4" diameter="0.8"/>
  <wire x1="27" y1="83" x2="28.8" y2="84.8" width="0.2" layer="16"/>
  <wire x1="28.8" y1="84.8" x2="32.1" y2="84.8" width="0.2" layer="16"/>
@@ -4273,38 +4250,13 @@ design rules under a new name.</description>
  </signal>
  <signal name="AIN2">
  <contactref element="U1" pad="25"/>
-<contactref element="U9" pad="4"/>
-<wire x1="41.55" y1="46.05" x2="41.55" y2="44.95" width="0.2" layer="1"/>
-<wire x1="41.55" y1="44.95" x2="42" y2="44.5" width="0.2" layer="1"/>
-<via x="36" y="46" extent="1-16" drill="0.4" diameter="0.8"/>
-<wire x1="41.55" y1="46.05" x2="40.5" y2="46.05" width="0.2" layer="1"/>
-<wire x1="40.5" y1="46.05" x2="40.5" y2="46" width="0.2" layer="1"/>
-<via x="40.5" y="46" extent="1-16" drill="0.4"/>
-<wire x1="36" y1="46" x2="40.5" y2="46" width="0.2" layer="16"/>
-<contactref element="P4" pad="1"/>
-<wire x1="42" y1="44.5" x2="60" y2="44.5" width="0.2" layer="1"/>
-<wire x1="36" y1="46" x2="36.5" y2="46.5" width="0.2" layer="1"/>
-<wire x1="36.5" y1="46.5" x2="36.5" y2="52.5" width="0.2" layer="1"/>
-<wire x1="36.5" y1="52.5" x2="36.5" y2="52.8" width="0.2" layer="1"/>
-<wire x1="36.5" y1="52.8" x2="38.2" y2="54.5" width="0.2" layer="1"/>
-<wire x1="38.2" y1="54.5" x2="41.3" y2="54.5" width="0.2" layer="1"/>
-<wire x1="41.3" y1="54.5" x2="43.1" y2="56.3" width="0.2" layer="1"/>
  <wire x1="34.5" y1="58.25" x2="34.5" y2="59.5" width="0.2" layer="1"/>
-<via x="44.6" y="59" extent="1-16" drill="0.4" diameter="0.8"/>
-<wire x1="43.1" y1="56.3" x2="43.5" y2="56.7" width="0.2" layer="1"/>
-<wire x1="34.5" y1="59.5" x2="33.5" y2="60.5" width="0.2" layer="1"/>
-<wire x1="33.5" y1="60.5" x2="38" y2="60.5" width="0.2" layer="16"/>
-<wire x1="38" y1="60.5" x2="39" y2="59.5" width="0.2" layer="16"/>
-<wire x1="39" y1="59.5" x2="39.9" y2="58.6" width="0.2" layer="16"/>
-<wire x1="43.5" y1="56.7" x2="44.6" y2="57.8" width="0.2" layer="1"/>
-<wire x1="44.6" y1="57.8" x2="44.6" y2="59" width="0.2" layer="1"/>
-<wire x1="39.9" y1="58.6" x2="43.8" y2="58.6" width="0.2" layer="16"/>
-<wire x1="43.8" y1="58.6" x2="44.2" y2="58.6" width="0.2" layer="16"/>
-<wire x1="44.2" y1="58.6" x2="44.6" y2="59" width="0.2" layer="16"/>
-<contactref element="C54" pad="2"/>
-<contactref element="R42" pad="1"/>
-<wire x1="60" y1="44.5" x2="56.46" y2="42.96" width="0" layer="19" extent="1-1"/>
-<wire x1="-4.7" y1="25" x2="36" y2="46" width="0" layer="19" extent="1-16"/>
+<contactref element="C55" pad="1"/>
+<contactref element="R29" pad="2"/>
+<contactref element="P4" pad="1"/>
+<wire x1="34.5" y1="59.5" x2="33.5" y2="60.5" width="0" layer="19" extent="1-1"/>
+<wire x1="-14.8" y1="18" x2="34.5" y2="58.25" width="0" layer="19" extent="1-1"/>
+<wire x1="-13.2" y1="4.5" x2="-14.8" y2="18" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="DAC2_OUT">
  <contactref element="U1" pad="30"/>
@@ -4371,7 +4323,7 @@ design rules under a new name.</description>
  <wire x1="36.95" y1="61.25" x2="38.25" y2="61.25" width="0.2" layer="1"/>
  <wire x1="38.25" y1="61.25" x2="38.8" y2="61.8" width="0.2" layer="1"/>
  </signal>
-<signal name="!CPPT!">
+<signal name="!CPTT!">
  <contactref element="U1" pad="57"/>
  <contactref element="LD2" pad="2"/>
  <wire x1="31.5" y1="73.25" x2="31.5" y2="70" width="0.2" layer="1"/>
@@ -4403,7 +4355,7 @@ design rules under a new name.</description>
  <wire x1="45.3" y1="57.8" x2="45.3" y2="59.7" width="0.2" layer="1"/>
  <wire x1="45.3" y1="59.7" x2="45.3" y2="61.8" width="0.2" layer="1"/>
  <wire x1="45.3" y1="61.8" x2="43" y2="64.1" width="0.2" layer="1"/>
-<wire x1="49" y1="21.73" x2="46" y2="31.5" width="0" layer="19" extent="1-1"/>
+<wire x1="46" y1="31.5" x2="67.5" y2="21.5" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="!TEST!">
  <contactref element="R4" pad="2"/>
@@ -4654,6 +4606,8 @@ design rules under a new name.</description>
  <wire x1="56.5" y1="78" x2="56.5" y2="79" width="0.2" layer="1"/>
  <wire x1="56.5" y1="79" x2="59.5" y2="82" width="0.2" layer="1"/>
  <wire x1="59.5" y1="82" x2="59.5" y2="83.5" width="0.2" layer="1"/>
+<contactref element="C57" pad="1"/>
+<wire x1="-30.3" y1="-45.5" x2="50" y2="69.5" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="N$45">
  <contactref element="R39" pad="2"/>
@@ -4672,123 +4626,93 @@ design rules under a new name.</description>
  <wire x1="2.55" y1="47.2" x2="5" y2="47.2" width="0.25" layer="1"/>
  </signal>
  <signal name="N$51">
-<contactref element="CN12" pad="8"/>
  <contactref element="CN4" pad="8"/>
  <wire x1="31.945" y1="18" x2="31.945" y2="19.445" width="0.2" layer="1"/>
  <wire x1="31.945" y1="19.445" x2="34.5" y2="22" width="0.2" layer="1"/>
  <wire x1="34.5" y1="22" x2="34.5" y2="22.86" width="0.2" layer="1"/>
-<wire x1="34.5" y1="22.86" x2="34.49" y2="22.87" width="0.2" layer="1"/>
+<contactref element="CN12" pad="16"/>
+<wire x1="34.5" y1="22.86" x2="34.49" y2="22.87" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="N$52">
-<contactref element="CN12" pad="7"/>
  <contactref element="CN4" pad="7"/>
  <wire x1="30.675" y1="18" x2="30.675" y2="19.675" width="0.2" layer="1"/>
  <wire x1="30.675" y1="19.675" x2="32.5" y2="21.5" width="0.2" layer="1"/>
  <wire x1="32.5" y1="21.5" x2="32.5" y2="22.86" width="0.2" layer="1"/>
-<wire x1="32.5" y1="22.86" x2="32.49" y2="22.87" width="0.2" layer="1"/>
+<contactref element="CN12" pad="15"/>
+<wire x1="32.5" y1="22.86" x2="32.49" y2="22.87" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="N$53">
-<contactref element="CN12" pad="6"/>
  <contactref element="CN4" pad="6"/>
  <wire x1="29.405" y1="18" x2="29.405" y2="19.905" width="0.2" layer="1"/>
  <wire x1="29.405" y1="19.905" x2="30.5" y2="21" width="0.2" layer="1"/>
  <wire x1="30.5" y1="21" x2="30.5" y2="22.86" width="0.2" layer="1"/>
-<wire x1="30.5" y1="22.86" x2="30.49" y2="22.87" width="0.2" layer="1"/>
+<contactref element="CN12" pad="14"/>
+<wire x1="30.5" y1="22.86" x2="30.49" y2="22.87" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="N$54">
-<contactref element="CN12" pad="5"/>
  <contactref element="CN4" pad="5"/>
  <wire x1="28.135" y1="18" x2="28.135" y2="20.635" width="0.2" layer="1"/>
  <wire x1="28.135" y1="20.635" x2="28.5" y2="21" width="0.2" layer="1"/>
  <wire x1="28.5" y1="21" x2="28.5" y2="22.86" width="0.2" layer="1"/>
-<wire x1="28.5" y1="22.86" x2="28.49" y2="22.87" width="0.2" layer="1"/>
+<contactref element="CN12" pad="13"/>
+<wire x1="28.5" y1="22.86" x2="28.49" y2="22.87" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="N$55">
-<contactref element="CN12" pad="4"/>
  <contactref element="CN4" pad="4"/>
  <wire x1="26.865" y1="18" x2="26.865" y2="20.635" width="0.2" layer="1"/>
  <wire x1="26.865" y1="20.635" x2="26.5" y2="21" width="0.2" layer="1"/>
  <wire x1="26.5" y1="21" x2="26.5" y2="22.86" width="0.2" layer="1"/>
-<wire x1="26.5" y1="22.86" x2="26.49" y2="22.87" width="0.2" layer="1"/>
+<contactref element="CN12" pad="12"/>
+<wire x1="26.5" y1="22.86" x2="26.49" y2="22.87" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="N$56">
-<contactref element="CN12" pad="3"/>
  <contactref element="CN4" pad="3"/>
  <wire x1="25.595" y1="18" x2="25.595" y2="19.905" width="0.2" layer="1"/>
  <wire x1="25.595" y1="19.905" x2="24.5" y2="21" width="0.2" layer="1"/>
  <wire x1="24.5" y1="21" x2="24.5" y2="22.86" width="0.2" layer="1"/>
-<wire x1="24.5" y1="22.86" x2="24.49" y2="22.87" width="0.2" layer="1"/>
+<contactref element="CN12" pad="11"/>
+<wire x1="24.5" y1="22.86" x2="24.49" y2="22.87" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="N$57">
-<contactref element="CN12" pad="2"/>
  <contactref element="CN4" pad="2"/>
  <wire x1="24.325" y1="18" x2="24.325" y2="19.675" width="0.2" layer="1"/>
  <wire x1="24.325" y1="19.675" x2="22.5" y2="21.5" width="0.2" layer="1"/>
  <wire x1="22.5" y1="21.5" x2="22.5" y2="22.86" width="0.2" layer="1"/>
-<wire x1="22.5" y1="22.86" x2="22.49" y2="22.87" width="0.2" layer="1"/>
+<contactref element="CN12" pad="10"/>
+<wire x1="22.5" y1="22.86" x2="22.49" y2="22.87" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="N$58">
-<contactref element="CN12" pad="1"/>
  <contactref element="CN4" pad="1"/>
  <wire x1="23.055" y1="18" x2="23" y2="18" width="0.2" layer="1"/>
  <wire x1="23" y1="18" x2="23" y2="19.5" width="0.2" layer="1"/>
  <wire x1="23" y1="19.5" x2="20.49" y2="22.01" width="0.2" layer="1"/>
-<wire x1="20.49" y1="22.01" x2="20.49" y2="22.87" width="0.2" layer="1"/>
+<contactref element="CN12" pad="9"/>
+<wire x1="20.49" y1="22.01" x2="20.49" y2="22.87" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="MIC">
  <contactref element="CN7" pad="10"/>
-<contactref element="CN12" pad="15"/>
  <contactref element="C44" pad="1"/>
-<via x="18.55" y="27.4" extent="1-16" drill="0.4"/>
-<wire x1="18" y1="26.5" x2="18" y2="21" width="0.2" layer="1"/>
-<wire x1="18" y1="21" x2="18.4" y2="20.6" width="0.2" layer="1"/>
-<wire x1="18.4" y1="20.6" x2="18.4" y2="19.6" width="0.2" layer="1"/>
-<wire x1="18.4" y1="19.6" x2="18.4" y2="10.9" width="0.2" layer="1"/>
-<wire x1="18.4" y1="10.9" x2="18" y2="10.5" width="0.2" layer="1"/>
  <wire x1="23.5" y1="26.37" x2="23.5" y2="27.5" width="0.2" layer="1"/>
  <wire x1="23.5" y1="27.5" x2="23.5" y2="28.7" width="0.2" layer="1"/>
-<wire x1="18" y1="26.5" x2="18" y2="26.8" width="0.2" layer="1"/>
-<wire x1="21" y1="25.9" x2="20.1" y2="25.9" width="0.2" layer="16"/>
-<wire x1="18.55" y1="27.4" x2="18" y2="26.85" width="0.2" layer="1"/>
-<wire x1="18" y1="26.85" x2="18" y2="26.8" width="0.2" layer="1"/>
-<wire x1="20.1" y1="25.9" x2="20.05" y2="25.9" width="0.2" layer="16"/>
-<wire x1="20.05" y1="25.9" x2="18.55" y2="27.4" width="0.2" layer="16"/>
-<wire x1="21" y1="25.9" x2="21.46" y2="25.9" width="0.2" layer="16"/>
-<wire x1="21.46" y1="25.9" x2="22.49" y2="24.87" width="0.2" layer="16"/>
-<wire x1="22.49" y1="24.87" x2="23.5" y2="25.88" width="0.2" layer="1"/>
  <wire x1="23.5" y1="25.88" x2="23.5" y2="26.37" width="0.2" layer="1"/>
+<contactref element="CN12" pad="7"/>
  <wire x1="23.5" y1="25.88" x2="61.75" y2="15.8" width="0" layer="19" extent="1-16"/>
+<wire x1="22.49" y1="24.87" x2="23.5" y2="25.88" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="SPKR">
-<contactref element="CN12" pad="16"/>
  <contactref element="C43" pad="1"/>
-<wire x1="19.5" y1="23.88" x2="19.5" y2="23.87" width="0.2" layer="1"/>
-<wire x1="19.5" y1="23.87" x2="19.5" y2="21.7" width="0.2" layer="1"/>
-<wire x1="19.5" y1="21.7" x2="22" y2="19.2" width="0.2" layer="1"/>
-<wire x1="22" y1="19.2" x2="22" y2="15.5" width="0.2" layer="1"/>
  <wire x1="21" y1="25.87" x2="21" y2="27.5" width="0.2" layer="1"/>
  <wire x1="21" y1="27.5" x2="21" y2="28.7" width="0.2" layer="1"/>
-<wire x1="19.5" y1="23.87" x2="19.5" y2="23.88" width="0.2" layer="1"/>
-<wire x1="20.49" y1="24.87" x2="21" y2="25.38" width="0.2" layer="1"/>
  <wire x1="21" y1="25.38" x2="21" y2="25.87" width="0.2" layer="1"/>
-<wire x1="19.5" y1="23.87" x2="20.49" y2="24.86" width="0.2" layer="1"/>
-<wire x1="20.49" y1="24.86" x2="20.49" y2="24.87" width="0.2" layer="1"/>
-<wire x1="22" y1="15.5" x2="23.5" y2="14" width="0.2" layer="1"/>
-<wire x1="23.5" y1="14" x2="25.4" y2="14" width="0.2" layer="1"/>
-<wire x1="25.4" y1="14" x2="26" y2="14" width="0.2" layer="1"/>
-<wire x1="26" y1="14" x2="27.5" y2="12.5" width="0.2" layer="1"/>
-<wire x1="27.5" y1="12.5" x2="27.5" y2="11.5" width="0.2" layer="1"/>
-<wire x1="27.5" y1="11.5" x2="27.5" y2="10" width="0.2" layer="1"/>
-<wire x1="26.5" y1="8" x2="27.5" y2="9" width="0.2" layer="1"/>
-<wire x1="27.5" y1="9" x2="27.5" y2="10" width="0.2" layer="1"/>
-<wire x1="25.4" y1="13.97" x2="25.4" y2="14" width="0.2" layer="1"/>
  <contactref element="CN6" pad="4"/>
-<wire x1="27.5" y1="12.5" x2="43.75" y2="15.8" width="0" layer="19" extent="1-16"/>
+<contactref element="CN12" pad="8"/>
+<wire x1="21" y1="25.38" x2="43.75" y2="15.8" width="0" layer="19" extent="1-16"/>
+<wire x1="20.49" y1="24.87" x2="21" y2="25.38" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="N$49">
  <contactref element="LD2" pad="1"/>
  <contactref element="R51" pad="1"/>
-<wire x1="49" y1="24.27" x2="49.7" y2="27.5" width="0" layer="19" extent="1-1"/>
+<wire x1="49.7" y1="27.5" x2="67.5" y2="24.5" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="RF">
  <contactref element="CN9" pad="1"/>
@@ -4833,15 +4757,11 @@ design rules under a new name.</description>
  <wire x1="19.4" y1="25.5" x2="19.4" y2="29.6" width="0.5" layer="1"/>
  <wire x1="19.4" y1="29.6" x2="20.1" y2="30.3" width="0.5" layer="1"/>
  <wire x1="21" y1="30.3" x2="20.1" y2="30.3" width="0.4" layer="1"/>
-<contactref element="CN12" pad="13"/>
-<contactref element="CN12" pad="12"/>
  <wire x1="26" y1="30.3" x2="26.7" y2="30.3" width="0.4" layer="1"/>
  <wire x1="26.7" y1="30.3" x2="27" y2="30" width="0.4" layer="1"/>
  <wire x1="27" y1="30" x2="27" y2="26.5" width="0.4" layer="1"/>
  <wire x1="27" y1="26.5" x2="26.5" y2="26" width="0.4" layer="1"/>
  <wire x1="26.5" y1="26" x2="26.5" y2="24.88" width="0.4" layer="1"/>
-<wire x1="26.5" y1="24.88" x2="26.49" y2="24.87" width="0.4" layer="1"/>
-<wire x1="26.49" y1="24.87" x2="28.49" y2="24.87" width="0.4" layer="1"/>
  <polygon width="0.2" layer="2" isolate="0.3">
  <vertex x="19" y="1"/>
  <vertex x="19" y="9.5"/>
@@ -4849,9 +4769,12 @@ design rules under a new name.</description>
  <vertex x="64" y="1"/>
  </polygon>
  <contactref element="CN6" pad="1"/>
-<wire x1="55" y1="21.73" x2="56.5" y2="26.3" width="0" layer="19" extent="1-1"/>
-<wire x1="59.5" y1="17.5" x2="55" y2="21.73" width="0" layer="19" extent="1-1"/>
-<wire x1="39.4" y1="2.4" x2="33.85" y2="6.21" width="0" layer="19" extent="1-16"/>
+<contactref element="CN12" pad="4"/>
+<contactref element="CN12" pad="5"/>
+<wire x1="59.5" y1="17.5" x2="77.5" y2="21.5" width="0" layer="19" extent="1-1"/>
+<wire x1="26.49" y1="24.87" x2="26.5" y2="24.88" width="0" layer="19" extent="1-1"/>
+<wire x1="28.49" y1="24.87" x2="26.5" y2="24.88" width="0" layer="19" extent="1-1"/>
+<wire x1="56.5" y1="26.3" x2="59.5" y2="17.5" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="N$59">
  <contactref element="U6" pad="1"/>
@@ -4905,15 +4828,16 @@ design rules under a new name.</description>
  <wire x1="33" y1="16" x2="33" y2="18.5" width="0.2" layer="1"/>
  <wire x1="34.5" y1="26.3" x2="33.5" y2="26.3" width="0.2" layer="1"/>
  <wire x1="33.5" y1="26.3" x2="33" y2="26.8" width="0.2" layer="1"/>
-<wire x1="33" y1="26.8" x2="33" y2="35.23" width="0.2" layer="1"/>
-<wire x1="31.73" y1="36.5" x2="33" y2="35.23" width="0.2" layer="1"/>
+<wire x1="33" y1="26.8" x2="33" y2="34.23" width="0.2" layer="1"/>
  <wire x1="33" y1="18.5" x2="33" y2="19.5" width="0.2" layer="1"/>
  <wire x1="33" y1="19.5" x2="35.5" y2="22" width="0.2" layer="1"/>
  <wire x1="35.5" y1="22" x2="35.5" y2="25.5" width="0.2" layer="1"/>
  <wire x1="35.5" y1="25.5" x2="34.7" y2="26.3" width="0.2" layer="1"/>
  <wire x1="34.7" y1="26.3" x2="34.5" y2="26.3" width="0.2" layer="1"/>
  <contactref element="CN5" pad="10"/>
-<wire x1="34.75" y1="15.8" x2="32.5" y2="15.5" width="0" layer="19" extent="1-16"/>
+<wire x1="33" y1="34.23" x2="34.27" y2="35.5" width="0.2" layer="1"/>
+<wire x1="34.27" y1="35.5" x2="34.27" y2="36.5" width="0.2" layer="1"/>
+<wire x1="33" y1="16" x2="34.75" y2="15.8" width="0" layer="19" extent="1-16"/>
  </signal>
  <signal name="N$33">
  <contactref element="FB1" pad="1"/>
@@ -4928,8 +4852,7 @@ design rules under a new name.</description>
  <signal name="N$72">
  <contactref element="FB2" pad="2"/>
  <contactref element="CN7" pad="2"/>
-<wire x1="57.4" y1="11.8" x2="48.2" y2="12" width="0" layer="19" extent="1-16"/>
-<wire x1="48.2" y1="12" x2="42.5" y2="22.525" width="0" layer="19" extent="1-16"/>
+<wire x1="42.5" y1="22.525" x2="57.4" y2="11.8" width="0" layer="19" extent="1-16"/>
  </signal>
  <signal name="N$73">
  <contactref element="FB6" pad="2"/>
@@ -4940,8 +4863,8 @@ design rules under a new name.</description>
  <contactref element="FB6" pad="1"/>
  <contactref element="LD2" pad="4"/>
  <via x="38.5" y="25.5" extent="1-16" drill="0.4"/>
-<wire x1="38.5" y1="23.975" x2="55" y2="24.27" width="0" layer="19" extent="1-1"/>
-<wire x1="38.5" y1="25.5" x2="38.5" y2="23.975" width="0" layer="19" extent="1-1"/>
+<wire x1="38.5" y1="25.5" x2="77.5" y2="24.5" width="0" layer="19" extent="1-1"/>
+<wire x1="38.5" y1="23.975" x2="38.5" y2="25.5" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="N$44">
  <contactref element="FB3" pad="1"/>
@@ -4967,8 +4890,8 @@ design rules under a new name.</description>
  <wire x1="35.5" y1="18" x2="35.5" y2="12.5" width="0.2" layer="1"/>
  <contactref element="CN8" pad="3"/>
  <contactref element="CN8" pad="2"/>
+<wire x1="28.6" y1="5.4" x2="35.5" y2="12.5" width="0" layer="19" extent="1-16"/>
  <wire x1="21.4" y1="11.8" x2="28.6" y2="5.4" width="0" layer="19" extent="16-16"/>
-<wire x1="35.5" y1="12.5" x2="21.4" y2="11.8" width="0" layer="19" extent="1-16"/>
  </signal>
  <signal name="N$76">
  <contactref element="CN5" pad="2"/>
@@ -5067,7 +4990,7 @@ design rules under a new name.</description>
  <wire x1="34.75" y1="18.25" x2="36" y2="19.5" width="0.2" layer="16"/>
  <wire x1="36" y1="19.5" x2="36" y2="20.5" width="0.2" layer="16"/>
  <contactref element="CN8" pad="4"/>
-<wire x1="36" y1="19.5" x2="25.75" y2="15.8" width="0" layer="19" extent="16-16"/>
+<wire x1="25.75" y1="15.8" x2="34.75" y2="18.25" width="0" layer="19" extent="16-16"/>
  </signal>
  <signal name="N$41">
  <contactref element="R53" pad="2"/>
@@ -5168,7 +5091,6 @@ design rules under a new name.</description>
  </signal>
  <signal name="APTT">
  <contactref element="CN9" pad="10"/>
-<contactref element="CN12" pad="14"/>
  <contactref element="C45" pad="1"/>
  <via x="26" y="27.5" extent="1-16" drill="0.4"/>
  <via x="36.5" y="30" extent="1-16" drill="0.4"/>
@@ -5180,13 +5102,14 @@ design rules under a new name.</description>
  <wire x1="26" y1="27.5" x2="26" y2="28" width="0.2" layer="16"/>
  <wire x1="26" y1="28" x2="28" y2="30" width="0.2" layer="16"/>
  <wire x1="28" y1="30" x2="36.5" y2="30" width="0.2" layer="16"/>
-<wire x1="24.49" y1="24.87" x2="26" y2="26.38" width="0.2" layer="1"/>
  <wire x1="26" y1="26.38" x2="26" y2="26.87" width="0.2" layer="1"/>
  <wire x1="37" y1="26.4" x2="37" y2="21.8" width="0.2" layer="1"/>
  <wire x1="37" y1="21.8" x2="37.3" y2="21.5" width="0.2" layer="1"/>
  <wire x1="37.3" y1="21.5" x2="37.3" y2="18.8" width="0.2" layer="1"/>
  <wire x1="37.3" y1="18.8" x2="36.5" y2="18" width="0.2" layer="1"/>
+<contactref element="CN12" pad="6"/>
  <wire x1="37.3" y1="18.8" x2="52.75" y2="15.8" width="0" layer="19" extent="1-16"/>
+<wire x1="24.49" y1="24.87" x2="26" y2="26.38" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="N$6">
  <contactref element="R20" pad="2"/>
@@ -5544,6 +5467,9 @@ design rules under a new name.</description>
  <via x="31" y="56.5" extent="1-16" drill="0.4" diameter="0.8"/>
  <wire x1="32" y1="58.25" x2="32" y2="57.5" width="0.2" layer="1"/>
  <wire x1="32" y1="57.5" x2="31" y2="56.5" width="0.2" layer="1"/>
+<contactref element="C55" pad="2"/>
+<contactref element="C56" pad="2"/>
+<contactref element="C57" pad="2"/>
  <wire x1="53.25" y1="82.75" x2="53.25" y2="81.8" width="0" layer="19" extent="1-1"/>
  <wire x1="52.3" y1="81.8" x2="53.25" y2="81.8" width="0" layer="19" extent="1-1"/>
  <wire x1="51" y1="73.3" x2="50.75" y2="80.2" width="0" layer="19" extent="1-1"/>
@@ -5562,18 +5488,21 @@ design rules under a new name.</description>
  <wire x1="44.5" y1="50.7" x2="47.5" y2="50.7" width="0" layer="19" extent="1-1"/>
  <wire x1="43.7" y1="50.7" x2="44.5" y2="50.7" width="0" layer="19" extent="1-1"/>
  <wire x1="32" y1="57.5" x2="42.5" y2="49.5" width="0" layer="19" extent="1-1"/>
-<wire x1="34.27" y1="36.5" x2="42.5" y2="48.45" width="0" layer="19" extent="1-1"/>
-<wire x1="29" y1="31.27" x2="34.27" y2="36.5" width="0" layer="19" extent="1-1"/>
+<wire x1="31.73" y1="36.5" x2="42.5" y2="48.45" width="0" layer="19" extent="1-1"/>
+<wire x1="29" y1="31.27" x2="31.73" y2="36.5" width="0" layer="19" extent="1-1"/>
  <wire x1="39.96" y1="18.25" x2="29" y2="31.27" width="0" layer="19" extent="1-1"/>
  <wire x1="51.96" y1="18.25" x2="39.96" y2="18.25" width="0" layer="19" extent="1-1"/>
-<wire x1="21.4" y1="2.4" x2="51.96" y2="18.25" width="0" layer="19" extent="1-16"/>
  <wire x1="30.4" y1="2.4" x2="39.96" y2="18.25" width="0" layer="19" extent="1-16"/>
+<wire x1="21.4" y1="2.4" x2="30.4" y2="2.4" width="0" layer="19" extent="16-16"/>
  <wire x1="-5.8" y1="29.5" x2="29" y2="31.27" width="0" layer="19" extent="1-1"/>
+<wire x1="-13.5" y1="26" x2="-5.8" y2="29.5" width="0" layer="19" extent="1-1"/>
+<wire x1="-13.2" y1="18" x2="-13.5" y2="26" width="0" layer="19" extent="1-1"/>
+<wire x1="-13.2" y1="14.5" x2="-13.2" y2="18" width="0" layer="19" extent="1-1"/>
  <wire x1="-8.8" y1="44.2" x2="-5.8" y2="29.5" width="0" layer="19" extent="1-1"/>
  <wire x1="-11.75" y1="44.1" x2="-8.8" y2="44.2" width="0" layer="19" extent="1-1"/>
  <wire x1="-17.7" y1="44.2" x2="-11.75" y2="44.1" width="0" layer="19" extent="1-1"/>
  <wire x1="-20.4" y1="44.2" x2="-17.7" y2="44.2" width="0" layer="19" extent="1-1"/>
-<wire x1="-29" y1="-56" x2="30.4" y2="2.4" width="0" layer="19" extent="16-16"/>
+<wire x1="-28.7" y1="-45.5" x2="-13.2" y2="14.5" width="0" layer="19" extent="1-1"/>
  </signal>
  <signal name="AVDD">
  <contactref element="J3" pad="2"/>
@@ -5619,7 +5548,23 @@ design rules under a new name.</description>
  <wire x1="49.5" y1="46.95" x2="52.5" y2="46.95" width="0" layer="19" extent="1-1"/>
  <wire x1="46.5" y1="46.95" x2="49.5" y2="46.95" width="0" layer="19" extent="1-1"/>
  <wire x1="42.5" y1="46.05" x2="46.5" y2="46.95" width="0" layer="19" extent="1-1"/>
-<wire x1="-29" y1="-60.5" x2="42.5" y2="46.05" width="0" layer="19" extent="1-1"/>
+<wire x1="-13.5" y1="21.5" x2="42.5" y2="46.05" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="N$27">
+<contactref element="R9" pad="2"/>
+<contactref element="U6" pad="4"/>
+<contactref element="R23" pad="1"/>
+<wire x1="51.05" y1="64.3" x2="70.7" y2="64" width="0" layer="19" extent="1-1"/>
+<wire x1="-13.2" y1="9.5" x2="51.05" y2="64.3" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="N$32">
+<contactref element="U9" pad="4"/>
+<contactref element="R29" pad="1"/>
+<contactref element="C54" pad="2"/>
+<contactref element="R42" pad="1"/>
+<wire x1="41.55" y1="46.05" x2="56.46" y2="42.96" width="0" layer="19" extent="1-1"/>
+<wire x1="-4.7" y1="25" x2="41.55" y2="46.05" width="0" layer="19" extent="1-1"/>
+<wire x1="-14.8" y1="4.5" x2="-4.7" y2="25" width="0" layer="19" extent="1-1"/>
  </signal>
  </signals>
  <errors>
diff --git a/smartmic/SM1000-C/SM1000-C.pdf b/smartmic/SM1000-C/SM1000-C.pdf

new file mode 100644 (file)

index 0000000..9912936

Binary files /dev/null and b/smartmic/SM1000-C/SM1000-C.pdf differ
diff --git a/smartmic/SM1000-C/SM1000-C.sch b/smartmic/SM1000-C/SM1000-C.sch

index 4f06785bd52856b7ccd0077e7da3f00a1046d60e..472f58324451d593e4271ed10d1605c1bfd99d31 100644 (file)
--- a/smartmic/SM1000-C/SM1000-C.sch
+++ b/smartmic/SM1000-C/SM1000-C.sch
@@ -479,29 +479,21 @@ INFINEON, www.infineon.com/cmc_upload/0/000/010/257/eh_db_5b.pdf</description>
  <wire x1="8.5" y1="-3" x2="-6" y2="-3" width="0" layer="39"/>
  <wire x1="-6" y1="-3" x2="-6" y2="3" width="0" layer="39"/>
  </package>
-<package name="SMD4">
-<description>&lt;b&gt;SMD 4&lt;/b&gt;&lt;p&gt;
-Source: http://www.vishay.com/docs/83673/sfh618.pdf</description>
-<wire x1="2.315" y1="1.98" x2="2.315" y2="-1.98" width="0.1524" layer="21"/>
-<wire x1="-2.315" y1="-0.585" x2="-2.315" y2="1.98" width="0.1524" layer="21"/>
-<wire x1="-2.315" y1="1.98" x2="2.315" y2="1.98" width="0.1524" layer="51"/>
-<wire x1="2.315" y1="-1.98" x2="-2.315" y2="-1.98" width="0.1524" layer="51"/>
-<wire x1="-2.315" y1="-1.63" x2="-2.315" y2="-0.585" width="0.1524" layer="21" curve="180"/>
-<wire x1="-2.315" y1="-1.98" x2="-2.315" y2="-1.63" width="0.1524" layer="21"/>
-<wire x1="-2.315" y1="-1.63" x2="-2.315" y2="-0.585" width="0.1524" layer="21"/>
-<smd name="1" x="-1.27" y="-3" dx="1.5" dy="1.3" layer="1"/>
-<smd name="2" x="1.27" y="-3" dx="1.5" dy="1.3" layer="1"/>
-<smd name="3" x="1.27" y="3" dx="1.5" dy="1.3" layer="1" rot="R180"/>
-<smd name="4" x="-1.27" y="3" dx="1.5" dy="1.3" layer="1" rot="R180"/>
-<text x="-3" y="-2.5" size="1" layer="25" ratio="10" rot="R90">&gt;NAME</text>
-<rectangle x1="-1.651" y1="-3.425" x2="-0.889" y2="-2.7" layer="51"/>
-<rectangle x1="0.889" y1="-3.425" x2="1.651" y2="-2.7" layer="51"/>
-<rectangle x1="0.889" y1="2.7" x2="1.651" y2="3.425" layer="51" rot="R180"/>
-<rectangle x1="-1.651" y1="2.7" x2="-0.889" y2="3.425" layer="51" rot="R180"/>
-<wire x1="-2.7" y1="4.3" x2="2.7" y2="4.3" width="0" layer="39"/>
-<wire x1="2.7" y1="4.3" x2="2.7" y2="-4.3" width="0" layer="39"/>
-<wire x1="2.7" y1="-4.3" x2="-2.7" y2="-4.3" width="0" layer="39"/>
-<wire x1="-2.7" y1="-4.3" x2="-2.7" y2="4.3" width="0" layer="39"/>
+<package name="LTV-817S">
+<smd name="4" x="-1.5" y="5" dx="2.5" dy="2" layer="1" rot="R90"/>
+<smd name="1" x="-1.5" y="-5" dx="2.5" dy="2" layer="1" rot="R90"/>
+<smd name="2" x="1.5" y="-5" dx="2.5" dy="2" layer="1" rot="R90"/>
+<smd name="3" x="1.5" y="5" dx="2.5" dy="2" layer="1" rot="R90"/>
+<wire x1="-2.5" y1="-3" x2="-2.5" y2="3" width="0.15" layer="21"/>
+<wire x1="-2.5" y1="3" x2="2.5" y2="3" width="0.15" layer="21"/>
+<wire x1="2.5" y1="3" x2="2.5" y2="-3" width="0.15" layer="21"/>
+<wire x1="2.5" y1="-3" x2="-2.5" y2="-3" width="0.15" layer="21"/>
+<circle x="-1.5" y="-2" radius="0.728009375" width="0" layer="21"/>
+<text x="-2.5" y="7" size="1" layer="21" ratio="10">&gt;NAME</text>
+<wire x1="-3" y1="7" x2="3" y2="7" width="0" layer="39"/>
+<wire x1="3" y1="7" x2="3" y2="-7" width="0" layer="39"/>
+<wire x1="3" y1="-7" x2="-3" y2="-7" width="0" layer="39"/>
+<wire x1="-3" y1="-7" x2="-3" y2="7" width="0" layer="39"/>
  </package>
  <package name="RASM722PX">
  <smd name="1" x="-7.19" y="-0.24" dx="6.35" dy="3.81" layer="1" rot="R90"/>
@@ -713,8 +705,8 @@ Source: http://cache.national.com/ds/LM/LM386.pdf</description>
  </package>
  <package name="CMA-4544PF-W">
  <circle x="0" y="0" radius="4.8" width="0.15" layer="21"/>
-<pad name="1" x="-2" y="1.27" drill="1.2" shape="square"/>
-<pad name="2" x="-2" y="-1.27" drill="1.2" diameter="1.9304"/>
+<pad name="2" x="-2" y="1.27" drill="1.2" shape="square"/>
+<pad name="1" x="-2" y="-1.27" drill="1.2" diameter="1.9304"/>
  <text x="-2.5" y="6" size="1" layer="25" ratio="10">&gt;NAME</text>
  <circle x="0" y="0" radius="5.59016875" width="0.01" layer="39"/>
  </package>
@@ -1491,7 +1483,7 @@ chip</description>
  <gate name="G$1" symbol="OK" x="0" y="0"/>
  </gates>
  <devices>
-<device name="" package="SMD4">
+<device name="" package="LTV-817S">
  <connects>
  <connect gate="G$1" pin="A" pad="1"/>
  <connect gate="G$1" pin="C" pad="2"/>
@@ -2419,11 +2411,11 @@ by exp-lbrs.ulp</description>
  <text x="-8.5" y="-10.5" size="1" layer="25" ratio="10">&gt;VALUE</text>
  </package>
  <package name="MOLEX-MINI-B-SMT">
-<smd name="1" x="-1.6" y="6.225" dx="2.25" dy="0.5" layer="1" rot="R90"/>
-<smd name="2" x="-0.8" y="6.225" dx="2.25" dy="0.5" layer="1" rot="R90"/>
-<smd name="3" x="0" y="6.225" dx="2.25" dy="0.5" layer="1" rot="R90"/>
-<smd name="4" x="0.8" y="6.225" dx="2.25" dy="0.5" layer="1" rot="R90"/>
-<smd name="5" x="1.6" y="6.225" dx="2.25" dy="0.5" layer="1" rot="R90"/>
+<smd name="1" x="-1.6" y="6.75" dx="3.25" dy="0.5" layer="1" rot="R90"/>
+<smd name="2" x="-0.8" y="6.75" dx="3.25" dy="0.5" layer="1" rot="R90"/>
+<smd name="3" x="0" y="6.75" dx="3.25" dy="0.5" layer="1" rot="R90"/>
+<smd name="4" x="0.8" y="6.75" dx="3.25" dy="0.5" layer="1" rot="R90"/>
+<smd name="5" x="1.6" y="6.75" dx="3.25" dy="0.5" layer="1" rot="R90"/>
  <smd name="6" x="-5.5" y="6.25" dx="3.5" dy="2.05" layer="1" rot="R90"/>
  <smd name="7" x="5.5" y="6.25" dx="3.5" dy="2.05" layer="1" rot="R90"/>
  <smd name="8" x="-5.5" y="2" dx="4" dy="2.05" layer="1" rot="R90"/>
@@ -2446,9 +2438,9 @@ by exp-lbrs.ulp</description>
  <wire x1="-4" y1="-0.5" x2="-7" y2="-0.5" width="0" layer="39"/>
  <wire x1="-7" y1="-0.5" x2="-7" y2="8.5" width="0" layer="39"/>
  <text x="-6.5" y="9" size="1" layer="21" ratio="10">&gt;NAME</text>
-<wire x1="-4" y1="0" x2="-4" y2="8.5" width="0.15" layer="21"/>
-<wire x1="-4" y1="8.5" x2="4" y2="8.5" width="0.15" layer="21"/>
-<wire x1="4" y1="8.5" x2="4" y2="0" width="0.15" layer="21"/>
+<wire x1="-4" y1="0" x2="-4" y2="9" width="0.15" layer="21"/>
+<wire x1="-4" y1="9" x2="4" y2="9" width="0.15" layer="21"/>
+<wire x1="4" y1="9" x2="4" y2="0" width="0.15" layer="21"/>
  </package>
  <package name="C1210">
  <wire x1="-2.35" y1="-1.6" x2="-2.35" y2="1.6" width="0" layer="39"/>
@@ -2469,22 +2461,22 @@ by exp-lbrs.ulp</description>
  <rectangle x1="1.095" y1="-1.25" x2="1.6" y2="1.25" layer="51"/>
  </package>
  <package name="HRS-DF11-16DS">
-<pad name="1" x="-1" y="7" drill="0.8" shape="square"/>
-<pad name="2" x="-1" y="5" drill="0.8"/>
-<pad name="3" x="-1" y="3" drill="0.8"/>
-<pad name="4" x="-1" y="1" drill="0.8"/>
-<pad name="5" x="-1" y="-1" drill="0.8"/>
-<pad name="6" x="-1" y="-3" drill="0.8"/>
-<pad name="7" x="-1" y="-5" drill="0.8"/>
-<pad name="8" x="-1" y="-7" drill="0.8"/>
-<pad name="9" x="1" y="-7" drill="0.8"/>
-<pad name="10" x="1" y="-5" drill="0.8"/>
-<pad name="11" x="1" y="-3" drill="0.8"/>
-<pad name="12" x="1" y="-1" drill="0.8"/>
-<pad name="13" x="1" y="1" drill="0.8"/>
-<pad name="14" x="1" y="3" drill="0.8"/>
-<pad name="15" x="1" y="5" drill="0.8"/>
-<pad name="16" x="1" y="7" drill="0.8"/>
+<pad name="1" x="-1" y="7" drill="0.8" diameter="1.4224" shape="square"/>
+<pad name="2" x="-1" y="5" drill="0.8" diameter="1.4224"/>
+<pad name="3" x="-1" y="3" drill="0.8" diameter="1.4224"/>
+<pad name="4" x="-1" y="1" drill="0.8" diameter="1.4224"/>
+<pad name="5" x="-1" y="-1" drill="0.8" diameter="1.4224"/>
+<pad name="6" x="-1" y="-3" drill="0.8" diameter="1.4224"/>
+<pad name="7" x="-1" y="-5" drill="0.8" diameter="1.4224"/>
+<pad name="8" x="-1" y="-7" drill="0.8" diameter="1.4224"/>
+<pad name="9" x="1" y="-7" drill="0.8" diameter="1.4224"/>
+<pad name="10" x="1" y="-5" drill="0.8" diameter="1.4224"/>
+<pad name="11" x="1" y="-3" drill="0.8" diameter="1.4224"/>
+<pad name="12" x="1" y="-1" drill="0.8" diameter="1.4224"/>
+<pad name="13" x="1" y="1" drill="0.8" diameter="1.4224"/>
+<pad name="14" x="1" y="3" drill="0.8" diameter="1.4224"/>
+<pad name="15" x="1" y="5" drill="0.8" diameter="1.4224"/>
+<pad name="16" x="1" y="7" drill="0.8" diameter="1.4224"/>
  <wire x1="-2.5" y1="9" x2="-2.5" y2="-9" width="0.15" layer="21"/>
  <wire x1="-2.5" y1="-9" x2="2.5" y2="-9" width="0.15" layer="21"/>
  <wire x1="2.5" y1="-9" x2="2.5" y2="9" width="0.15" layer="21"/>
@@ -4077,7 +4069,6 @@ http://www.weartronics.com/</description>
  <part name="CN9" library="_RoweTel" deviceset="MJ-3523-SMT" device=""/>
  <part name="V68" library="A-SUPPLY2" deviceset="RF" device=""/>
  <part name="CN7" library="_RoweTel" deviceset="MJ-3523-SMT" device=""/>
-<part name="CN12" library="SM1000" deviceset="HRS-DF11-16DS" device="" value="DF11-16DS"/>
  <part name="V70" library="A-SUPPLY2" deviceset="RF" device=""/>
  <part name="V69" library="A-SUPPLY2" deviceset="RF" device=""/>
  <part name="V72" library="A-SUPPLY2" deviceset="RF" device=""/>
@@ -4280,6 +4271,15 @@ http://www.weartronics.com/</description>
  <part name="V6" library="A-SUPPLY2" deviceset="GND" device=""/>
  <part name="U$46" library="A-SUPPLY2" deviceset="AVSS" device=""/>
  <part name="U$47" library="A-SUPPLY2" deviceset="AVSS" device=""/>
+<part name="C55" library="AA-ipc-7351-capacitor" deviceset="CAPACITOR_" device="0603" value="1nF,16V"/>
+<part name="C56" library="AA-ipc-7351-capacitor" deviceset="CAPACITOR_" device="0603" value="1nF,16V"/>
+<part name="U$48" library="A-SUPPLY2" deviceset="AVSS" device=""/>
+<part name="U$49" library="A-SUPPLY2" deviceset="AVSS" device=""/>
+<part name="R9" library="AA-ipc-7351-resistor" deviceset="RESISTOR_" device="0603" value="1.5K,1%"/>
+<part name="R29" library="AA-ipc-7351-resistor" deviceset="RESISTOR_" device="0603" value="1.5K,1%"/>
+<part name="C57" library="AA-ipc-7351-capacitor" deviceset="CAPACITOR_" device="0603"/>
+<part name="U$50" library="A-SUPPLY2" deviceset="AVSS" device=""/>
+<part name="CN12" library="SM1000" deviceset="HRS-DF11-16DS" device=""/>
  </parts>
  <sheets>
  <sheet>
@@ -4308,7 +4308,7 @@ http://www.weartronics.com/</description>
  <text x="187.96" y="205.74" size="2.54" layer="94" ratio="10">OSCILLATOR CRYSTAL</text>
  <text x="193.04" y="165.1" size="2.54" layer="94" ratio="10">5.0V -&gt; 3.3V PS</text>
  <text x="208.28" y="106.68" size="2.54" layer="94" ratio="10">OTG USB INTERFACE</text>
-<text x="73.66" y="220.98" size="2.54" layer="94" ratio="10">STM32F405 CPU</text>
+<text x="101.6" y="231.14" size="2.54" layer="94" ratio="10">STM32F405 CPU</text>
  <text x="137.16" y="73.66" size="2.54" layer="94" ratio="10">STM32F407 PWR CIRCUIT</text>
  <text x="347.472" y="17.272" size="3.81" layer="94" ratio="10">SmartMic Circuit Board</text>
  <text x="420.624" y="6.35" size="3.81" layer="94" ratio="10">B</text>
@@ -4349,6 +4349,8 @@ http://www.weartronics.com/</description>
  <text x="370.84" y="266.7" size="1.4224" layer="94" ratio="10">Release for Prototype</text>
  <text x="421.64" y="266.7" size="1.4224" layer="94" ratio="10">B</text>
  <text x="426.72" y="266.7" size="1.4224" layer="94" ratio="10">RGB</text>
+<text x="78.74" y="223.52" size="1.4224" layer="94" ratio="10">DNL</text>
+<text x="88.9" y="223.52" size="1.4224" layer="94" ratio="10">DNL</text>
  </plain>
  <instances>
  <instance part="U4" gate="G$1" x="254" y="25.4"/>
@@ -4721,6 +4723,10 @@ http://www.weartronics.com/</description>
  <instance part="V124" gate="GND" x="38.1" y="88.9"/>
  <instance part="U$46" gate="G$1" x="86.36" y="45.72"/>
  <instance part="U$47" gate="G$1" x="177.8" y="35.56"/>
+<instance part="C55" gate="G$1" x="76.2" y="218.44" rot="R270"/>
+<instance part="C56" gate="G$1" x="86.36" y="218.44" rot="R270"/>
+<instance part="U$48" gate="G$1" x="76.2" y="210.82"/>
+<instance part="U$49" gate="G$1" x="86.36" y="210.82"/>
  </instances>
  <busses>
  </busses>
@@ -5303,9 +5309,15 @@ http://www.weartronics.com/</description>
  </net>
  <net name="AIN1" class="0">
  <segment>
-<wire x1="104.14" y1="208.28" x2="88.9" y2="208.28" width="0.1524" layer="91"/>
-<label x="91.44" y="208.788" size="1.4224" layer="95" ratio="10"/>
+<wire x1="104.14" y1="208.28" x2="96.52" y2="208.28" width="0.1524" layer="91"/>
+<label x="71.12" y="229.108" size="1.4224" layer="95" ratio="10"/>
  <pinref part="U1" gate="A" pin="PA1"/>
+<wire x1="68.58" y1="228.6" x2="86.36" y2="228.6" width="0.1524" layer="91"/>
+<wire x1="86.36" y1="228.6" x2="96.52" y2="228.6" width="0.1524" layer="91"/>
+<wire x1="96.52" y1="228.6" x2="96.52" y2="208.28" width="0.1524" layer="91"/>
+<pinref part="C56" gate="G$1" pin="1"/>
+<wire x1="86.36" y1="223.52" x2="86.36" y2="228.6" width="0.1524" layer="91"/>
+<junction x="86.36" y="228.6"/>
  </segment>
  </net>
  <net name="+3.3V" class="0">
@@ -5606,9 +5618,16 @@ http://www.weartronics.com/</description>
  </net>
  <net name="AIN2" class="0">
  <segment>
-<wire x1="104.14" y1="205.74" x2="88.9" y2="205.74" width="0.1524" layer="91"/>
-<label x="91.44" y="206.248" size="1.4224" layer="95" ratio="10"/>
+<wire x1="104.14" y1="205.74" x2="93.98" y2="205.74" width="0.1524" layer="91"/>
+<label x="71.12" y="226.568" size="1.4224" layer="95" ratio="10"/>
  <pinref part="U1" gate="A" pin="PA2"/>
+<wire x1="86.36" y1="226.06" x2="76.2" y2="226.06" width="0.1524" layer="91"/>
+<wire x1="76.2" y1="226.06" x2="68.58" y2="226.06" width="0.1524" layer="91"/>
+<wire x1="86.36" y1="226.06" x2="93.98" y2="226.06" width="0.1524" layer="91"/>
+<wire x1="93.98" y1="226.06" x2="93.98" y2="205.74" width="0.1524" layer="91"/>
+<pinref part="C55" gate="G$1" pin="1"/>
+<wire x1="76.2" y1="223.52" x2="76.2" y2="226.06" width="0.1524" layer="91"/>
+<junction x="76.2" y="226.06"/>
  </segment>
  </net>
  <net name="DAC2_OUT" class="0">
@@ -5625,7 +5644,7 @@ http://www.weartronics.com/</description>
  <label x="91.44" y="201.168" size="1.4224" layer="95" ratio="10"/>
  </segment>
  </net>
-<net name="!CPPT!" class="0">
+<net name="!CPTT!" class="0">
  <segment>
  <pinref part="U1" gate="A" pin="PD10"/>
  <wire x1="139.7" y1="142.24" x2="157.48" y2="142.24" width="0.1524" layer="91"/>
@@ -5859,6 +5878,16 @@ http://www.weartronics.com/</description>
  <pinref part="U1" gate="B" pin="VSSA"/>
  <pinref part="U$47" gate="G$1" pin="AVSS"/>
  </segment>
+<segment>
+<pinref part="C55" gate="G$1" pin="2"/>
+<wire x1="76.2" y1="213.36" x2="76.2" y2="210.82" width="0.1524" layer="91"/>
+<pinref part="U$48" gate="G$1" pin="AVSS"/>
+</segment>
+<segment>
+<pinref part="C56" gate="G$1" pin="2"/>
+<wire x1="86.36" y1="213.36" x2="86.36" y2="210.82" width="0.1524" layer="91"/>
+<pinref part="U$49" gate="G$1" pin="AVSS"/>
+</segment>
  </net>
  </nets>
  </sheet>
@@ -5937,9 +5966,9 @@ http://www.weartronics.com/</description>
  <attribute name="NAME" x="147.32" y="264.16" size="1.4224" layer="95" ratio="10"/>
  <attribute name="VALUE" x="160.02" y="264.16" size="1.4224" layer="96" ratio="10"/>
  </instance>
-<instance part="R46" gate="G$1" x="43.18" y="58.42" smashed="yes" rot="MR180">
-<attribute name="NAME" x="38.1" y="60.96" size="1.4224" layer="95" ratio="9" rot="MR270"/>
-<attribute name="VALUE" x="40.64" y="60.96" size="1.4224" layer="96" ratio="9" rot="MR270"/>
+<instance part="R46" gate="G$1" x="35.56" y="58.42" smashed="yes" rot="MR180">
+<attribute name="NAME" x="30.48" y="60.96" size="1.4224" layer="95" ratio="9" rot="MR270"/>
+<attribute name="VALUE" x="33.02" y="60.96" size="1.4224" layer="96" ratio="9" rot="MR270"/>
  </instance>
  <instance part="SW3" gate="G$1" x="76.2" y="248.92" smashed="yes" rot="MR0">
  <attribute name="NAME" x="71.12" y="264.16" size="1.4224" layer="95" ratio="10"/>
@@ -6016,9 +6045,9 @@ http://www.weartronics.com/</description>
  <attribute name="NAME" x="101.6" y="121.92" size="1.4224" layer="95" ratio="9"/>
  <attribute name="VALUE" x="102.616" y="128.778" size="1.4224" layer="96" ratio="9"/>
  </instance>
-<instance part="C37" gate="G$1" x="35.56" y="68.58" smashed="yes">
-<attribute name="NAME" x="38.1" y="73.66" size="1.4224" layer="95" ratio="9"/>
-<attribute name="VALUE" x="38.1" y="71.12" size="1.4224" layer="96" ratio="9"/>
+<instance part="C37" gate="G$1" x="27.94" y="68.58" smashed="yes">
+<attribute name="NAME" x="30.48" y="73.66" size="1.4224" layer="95" ratio="9"/>
+<attribute name="VALUE" x="30.48" y="71.12" size="1.4224" layer="96" ratio="9"/>
  </instance>
  <instance part="U$8" gate="G$1" x="60.96" y="68.58" smashed="yes">
  <attribute name="VALUE" x="58.42" y="69.088" size="1.4224" layer="95" ratio="9"/>
@@ -6060,10 +6089,6 @@ http://www.weartronics.com/</description>
  <attribute name="NAME" x="289.56" y="91.44" size="1.778" layer="95" ratio="10"/>
  <attribute name="VALUE" x="297.18" y="91.44" size="1.778" layer="95" ratio="10"/>
  </instance>
-<instance part="CN12" gate="G$1" x="279.4" y="170.18" smashed="yes" rot="R180">
-<attribute name="NAME" x="284.48" y="157.48" size="1.4224" layer="95" ratio="10" rot="R180"/>
-<attribute name="VALUE" x="284.48" y="185.42" size="1.4224" layer="96" ratio="10" rot="R180"/>
-</instance>
  <instance part="V70" gate="G$1" x="299.72" y="149.86" smashed="yes">
  <attribute name="VALUE" x="297.4975" y="147.32" size="1.4224" layer="96" ratio="12"/>
  </instance>
@@ -6107,8 +6132,8 @@ http://www.weartronics.com/</description>
  <attribute name="VALUE" x="185.42" y="83.82" size="1.4224" layer="96" ratio="9"/>
  </instance>
  <instance part="U6" gate="G$1" x="185.42" y="129.54" smashed="yes" rot="MR0">
-<attribute name="NAME" x="175.26" y="137.16" size="1.4224" layer="95" ratio="9"/>
-<attribute name="VALUE" x="175.26" y="134.62" size="1.4224" layer="96" ratio="9"/>
+<attribute name="NAME" x="177.8" y="137.16" size="1.4224" layer="95" ratio="9"/>
+<attribute name="VALUE" x="177.8" y="134.62" size="1.4224" layer="96" ratio="9"/>
  </instance>
  <instance part="R44" gate="G$1" x="203.2" y="119.38" smashed="yes" rot="R270">
  <attribute name="NAME" x="205.74" y="124.46" size="1.4224" layer="95" ratio="9" rot="R270"/>
@@ -6157,9 +6182,9 @@ http://www.weartronics.com/</description>
  <attribute name="NAME" x="109.22" y="170.18" size="1.4224" layer="95"/>
  <attribute name="VALUE" x="109.22" y="167.64" size="1.4224" layer="96"/>
  </instance>
-<instance part="C23" gate="G$1" x="17.78" y="45.72" smashed="yes" rot="R270">
-<attribute name="NAME" x="20.32" y="40.64" size="1.4224" layer="95" ratio="9"/>
-<attribute name="VALUE" x="20.32" y="38.1" size="1.4224" layer="96" ratio="9"/>
+<instance part="C23" gate="G$1" x="10.16" y="45.72" smashed="yes" rot="R270">
+<attribute name="NAME" x="12.7" y="40.64" size="1.4224" layer="95" ratio="9"/>
+<attribute name="VALUE" x="12.7" y="38.1" size="1.4224" layer="96" ratio="9"/>
  </instance>
  <instance part="C41" gate="G$1" x="162.56" y="162.56" smashed="yes" rot="R270">
  <attribute name="NAME" x="165.1" y="160.02" size="1.4224" layer="95" ratio="9"/>
@@ -6169,8 +6194,8 @@ http://www.weartronics.com/</description>
  <attribute name="NAME" x="165.1" y="66.04" size="1.4224" layer="95" ratio="9"/>
  <attribute name="VALUE" x="165.1" y="63.5" size="1.4224" layer="96" ratio="9"/>
  </instance>
-<instance part="U$12" gate="G$1" x="17.78" y="53.34" smashed="yes">
-<attribute name="VALUE" x="15.24" y="53.848" size="1.4224" layer="95" ratio="9"/>
+<instance part="U$12" gate="G$1" x="10.16" y="53.34" smashed="yes">
+<attribute name="VALUE" x="7.62" y="53.848" size="1.4224" layer="95" ratio="9"/>
  </instance>
  <instance part="FB1" gate="G$1" x="274.32" y="134.62" smashed="yes">
  <attribute name="NAME" x="271.78" y="137.16" size="1.4224" layer="95" ratio="10"/>
@@ -6325,10 +6350,10 @@ http://www.weartronics.com/</description>
  <instance part="V92" gate="G$1" x="269.24" y="154.94" smashed="yes">
  <attribute name="VALUE" x="267.0175" y="152.4" size="1.4224" layer="96" ratio="12"/>
  </instance>
-<instance part="P1" gate="G$1" x="170.18" y="127" rot="R180"/>
+<instance part="P1" gate="G$1" x="160.02" y="127" rot="R180"/>
  <instance part="P2" gate="G$1" x="170.18" y="83.82" rot="R180"/>
-<instance part="P3" gate="G$1" x="27.94" y="71.12"/>
-<instance part="P4" gate="G$1" x="132.08" y="127" rot="R180"/>
+<instance part="P3" gate="G$1" x="20.32" y="71.12"/>
+<instance part="P4" gate="G$1" x="142.24" y="127" rot="R180"/>
  <instance part="C1" gate="G$1" x="101.6" y="251.46" smashed="yes" rot="R90">
  <attribute name="NAME" x="96.52" y="266.7" size="1.4224" layer="95"/>
  <attribute name="VALUE" x="96.52" y="264.16" size="1.4224" layer="96"/>
@@ -6348,9 +6373,9 @@ http://www.weartronics.com/</description>
  <attribute name="VALUE" x="63.5" y="128.778" size="1.4224" layer="96"/>
  </instance>
  <instance part="R21" gate="G$1" x="93.98" y="259.08"/>
-<instance part="R22" gate="G$1" x="27.94" y="60.96" smashed="yes" rot="R90">
-<attribute name="NAME" x="22.86" y="58.42" size="1.4224" layer="95" ratio="9" rot="R90"/>
-<attribute name="VALUE" x="25.4" y="58.42" size="1.4224" layer="96" ratio="9" rot="R90"/>
+<instance part="R22" gate="G$1" x="20.32" y="60.96" smashed="yes" rot="R90">
+<attribute name="NAME" x="15.24" y="58.42" size="1.4224" layer="95" ratio="9" rot="R90"/>
+<attribute name="VALUE" x="17.78" y="58.42" size="1.4224" layer="96" ratio="9" rot="R90"/>
  </instance>
  <instance part="C54" gate="G$1" x="124.46" y="154.94" smashed="yes">
  <attribute name="NAME" x="127" y="157.48" size="1.4224" layer="95"/>
@@ -6379,9 +6404,9 @@ http://www.weartronics.com/</description>
  <instance part="U$16" gate="G$1" x="119.38" y="106.68" rot="R180"/>
  <instance part="U$17" gate="G$1" x="124.46" y="185.42"/>
  <instance part="U$18" gate="G$1" x="137.16" y="185.42"/>
-<instance part="U$19" gate="G$1" x="17.78" y="38.1"/>
-<instance part="U$20" gate="G$1" x="27.94" y="53.34"/>
-<instance part="U$21" gate="G$1" x="43.18" y="48.26"/>
+<instance part="U$19" gate="G$1" x="10.16" y="38.1"/>
+<instance part="U$20" gate="G$1" x="20.32" y="53.34"/>
+<instance part="U$21" gate="G$1" x="35.56" y="48.26"/>
  <instance part="U$22" gate="G$1" x="53.34" y="50.8"/>
  <instance part="U$23" gate="G$1" x="60.96" y="45.72"/>
  <instance part="U$24" gate="G$1" x="76.2" y="27.94"/>
@@ -6420,6 +6445,17 @@ http://www.weartronics.com/</description>
  <instance part="U$45" gate="G$1" x="381" y="127"/>
  <instance part="V2" gate="G$1" x="360.68" y="139.7"/>
  <instance part="V6" gate="GND" x="360.68" y="124.46"/>
+<instance part="R9" gate="G$1" x="167.64" y="129.54" smashed="yes">
+<attribute name="NAME" x="165.1" y="134.62" size="1.4224" layer="95" ratio="9"/>
+<attribute name="VALUE" x="165.1" y="132.08" size="1.4224" layer="96" ratio="9"/>
+</instance>
+<instance part="R29" gate="G$1" x="134.62" y="129.54" smashed="yes">
+<attribute name="NAME" x="132.08" y="134.62" size="1.4224" layer="95" ratio="9"/>
+<attribute name="VALUE" x="132.08" y="132.08" size="1.4224" layer="96" ratio="9"/>
+</instance>
+<instance part="C57" gate="G$1" x="45.72" y="50.8" rot="R270"/>
+<instance part="U$50" gate="G$1" x="45.72" y="43.18"/>
+<instance part="CN12" gate="G$1" x="279.4" y="172.72"/>
  </instances>
  <busses>
  </busses>
@@ -6611,20 +6647,13 @@ http://www.weartronics.com/</description>
  </net>
  <net name="AIN2" class="0">
  <segment>
-<label x="132.588" y="130.302" size="1.4224" layer="95" ratio="10"/>
-<wire x1="132.08" y1="129.54" x2="137.16" y2="129.54" width="0.1524" layer="91"/>
-<pinref part="U9" gate="G$1" pin="OUT"/>
-<wire x1="124.46" y1="129.54" x2="132.08" y2="129.54" width="0.1524" layer="91"/>
-<wire x1="132.08" y1="147.32" x2="132.08" y2="129.54" width="0.1524" layer="91"/>
-<wire x1="132.08" y1="127" x2="132.08" y2="129.54" width="0.1524" layer="91"/>
+<pinref part="R29" gate="G$1" pin="2"/>
+<wire x1="139.7" y1="129.54" x2="142.24" y2="129.54" width="0.1524" layer="91"/>
+<label x="145.796" y="130.048" size="1.4224" layer="95" ratio="10"/>
  <pinref part="P4" gate="G$1" pin="1"/>
-<junction x="132.08" y="129.54"/>
-<pinref part="C54" gate="G$1" pin="2"/>
-<wire x1="129.54" y1="154.94" x2="132.08" y2="154.94" width="0.1524" layer="91"/>
-<wire x1="132.08" y1="154.94" x2="132.08" y2="147.32" width="0.1524" layer="91"/>
-<pinref part="R42" gate="G$1" pin="1"/>
-<wire x1="124.46" y1="147.32" x2="132.08" y2="147.32" width="0.1524" layer="91"/>
-<junction x="132.08" y="147.32"/>
+<wire x1="142.24" y1="129.54" x2="149.86" y2="129.54" width="0.1524" layer="91"/>
+<wire x1="142.24" y1="127" x2="142.24" y2="129.54" width="0.1524" layer="91"/>
+<junction x="142.24" y="129.54"/>
  </segment>
  </net>
  <net name="N$35" class="0">
@@ -6637,9 +6666,9 @@ http://www.weartronics.com/</description>
  <net name="N$34" class="0">
  <segment>
  <pinref part="C37" gate="G$1" pin="2"/>
-<wire x1="40.64" y1="68.58" x2="43.18" y2="68.58" width="0.1524" layer="91"/>
+<wire x1="33.02" y1="68.58" x2="35.56" y2="68.58" width="0.1524" layer="91"/>
  <pinref part="R46" gate="G$1" pin="3"/>
-<wire x1="43.18" y1="66.04" x2="43.18" y2="68.58" width="0.1524" layer="91"/>
+<wire x1="35.56" y1="66.04" x2="35.56" y2="68.58" width="0.1524" layer="91"/>
  </segment>
  </net>
  <net name="+VIN" class="0">
@@ -6688,8 +6717,12 @@ http://www.weartronics.com/</description>
  <net name="N$39" class="0">
  <segment>
  <pinref part="R46" gate="G$1" pin="2"/>
-<wire x1="48.26" y1="58.42" x2="55.88" y2="58.42" width="0.1524" layer="91"/>
+<wire x1="40.64" y1="58.42" x2="45.72" y2="58.42" width="0.1524" layer="91"/>
  <pinref part="U8" gate="G$1" pin="+IN"/>
+<pinref part="C57" gate="G$1" pin="1"/>
+<wire x1="45.72" y1="58.42" x2="55.88" y2="58.42" width="0.1524" layer="91"/>
+<wire x1="45.72" y1="55.88" x2="45.72" y2="58.42" width="0.1524" layer="91"/>
+<junction x="45.72" y="58.42"/>
  </segment>
  </net>
  <net name="N$45" class="0">
@@ -6710,70 +6743,70 @@ http://www.weartronics.com/</description>
  <net name="DAC2_OUT" class="0">
  <segment>
  <pinref part="C37" gate="G$1" pin="1"/>
-<wire x1="30.48" y1="68.58" x2="27.94" y2="68.58" width="0.1524" layer="91"/>
-<wire x1="27.94" y1="68.58" x2="27.94" y2="71.12" width="0.1524" layer="91"/>
-<label x="17.78" y="69.088" size="1.4224" layer="95" ratio="10"/>
+<wire x1="22.86" y1="68.58" x2="20.32" y2="68.58" width="0.1524" layer="91"/>
+<wire x1="20.32" y1="68.58" x2="20.32" y2="71.12" width="0.1524" layer="91"/>
+<label x="10.16" y="69.088" size="1.4224" layer="95" ratio="10"/>
  <pinref part="P3" gate="G$1" pin="1"/>
-<wire x1="27.94" y1="68.58" x2="15.24" y2="68.58" width="0.1524" layer="91"/>
-<junction x="27.94" y="68.58"/>
+<wire x1="20.32" y1="68.58" x2="7.62" y2="68.58" width="0.1524" layer="91"/>
+<junction x="20.32" y="68.58"/>
  <pinref part="R22" gate="G$1" pin="2"/>
-<wire x1="27.94" y1="66.04" x2="27.94" y2="68.58" width="0.1524" layer="91"/>
+<wire x1="20.32" y1="66.04" x2="20.32" y2="68.58" width="0.1524" layer="91"/>
  </segment>
  </net>
  <net name="N$51" class="0">
  <segment>
-<pinref part="CN12" gate="G$1" pin="8"/>
  <pinref part="CN4" gate="G$1" pin="8"/>
  <wire x1="289.56" y1="180.34" x2="287.02" y2="180.34" width="0.1524" layer="91"/>
+<pinref part="CN12" gate="G$1" pin="16"/>
  </segment>
  </net>
  <net name="N$52" class="0">
  <segment>
-<pinref part="CN12" gate="G$1" pin="7"/>
  <pinref part="CN4" gate="G$1" pin="7"/>
  <wire x1="289.56" y1="177.8" x2="287.02" y2="177.8" width="0.1524" layer="91"/>
+<pinref part="CN12" gate="G$1" pin="15"/>
  </segment>
  </net>
  <net name="N$53" class="0">
  <segment>
-<pinref part="CN12" gate="G$1" pin="6"/>
  <pinref part="CN4" gate="G$1" pin="6"/>
  <wire x1="289.56" y1="175.26" x2="287.02" y2="175.26" width="0.1524" layer="91"/>
+<pinref part="CN12" gate="G$1" pin="14"/>
  </segment>
  </net>
  <net name="N$54" class="0">
  <segment>
-<pinref part="CN12" gate="G$1" pin="5"/>
  <pinref part="CN4" gate="G$1" pin="5"/>
  <wire x1="289.56" y1="172.72" x2="287.02" y2="172.72" width="0.1524" layer="91"/>
+<pinref part="CN12" gate="G$1" pin="13"/>
  </segment>
  </net>
  <net name="N$55" class="0">
  <segment>
-<pinref part="CN12" gate="G$1" pin="4"/>
  <pinref part="CN4" gate="G$1" pin="4"/>
  <wire x1="289.56" y1="170.18" x2="287.02" y2="170.18" width="0.1524" layer="91"/>
+<pinref part="CN12" gate="G$1" pin="12"/>
  </segment>
  </net>
  <net name="N$56" class="0">
  <segment>
-<pinref part="CN12" gate="G$1" pin="3"/>
  <pinref part="CN4" gate="G$1" pin="3"/>
  <wire x1="289.56" y1="167.64" x2="287.02" y2="167.64" width="0.1524" layer="91"/>
+<pinref part="CN12" gate="G$1" pin="11"/>
  </segment>
  </net>
  <net name="N$57" class="0">
  <segment>
-<pinref part="CN12" gate="G$1" pin="2"/>
  <pinref part="CN4" gate="G$1" pin="2"/>
  <wire x1="289.56" y1="165.1" x2="287.02" y2="165.1" width="0.1524" layer="91"/>
+<pinref part="CN12" gate="G$1" pin="10"/>
  </segment>
  </net>
  <net name="N$58" class="0">
  <segment>
-<pinref part="CN12" gate="G$1" pin="1"/>
  <pinref part="CN4" gate="G$1" pin="1"/>
  <wire x1="289.56" y1="162.56" x2="287.02" y2="162.56" width="0.1524" layer="91"/>
+<pinref part="CN12" gate="G$1" pin="9"/>
  </segment>
  </net>
  <net name="MIC" class="0">
@@ -6784,12 +6817,12 @@ http://www.weartronics.com/</description>
  <wire x1="259.08" y1="144.78" x2="256.54" y2="144.78" width="0.1524" layer="91"/>
  <wire x1="256.54" y1="144.78" x2="256.54" y2="147.32" width="0.1524" layer="91"/>
  <wire x1="256.54" y1="147.32" x2="256.54" y2="165.1" width="0.1524" layer="91"/>
-<pinref part="CN12" gate="G$1" pin="15"/>
  <wire x1="256.54" y1="165.1" x2="271.78" y2="165.1" width="0.1524" layer="91"/>
  <pinref part="C44" gate="G$1" pin="1"/>
  <wire x1="231.14" y1="162.56" x2="231.14" y2="165.1" width="0.1524" layer="91"/>
  <wire x1="231.14" y1="165.1" x2="256.54" y2="165.1" width="0.1524" layer="91"/>
  <junction x="256.54" y="165.1"/>
+<pinref part="CN12" gate="G$1" pin="7"/>
  </segment>
  </net>
  <net name="SPKR" class="0">
@@ -6798,7 +6831,6 @@ http://www.weartronics.com/</description>
  <wire x1="261.62" y1="147.32" x2="261.62" y2="129.54" width="0.1524" layer="91"/>
  <wire x1="261.62" y1="147.32" x2="259.08" y2="147.32" width="0.1524" layer="91"/>
  <wire x1="259.08" y1="147.32" x2="259.08" y2="162.56" width="0.1524" layer="91"/>
-<pinref part="CN12" gate="G$1" pin="16"/>
  <wire x1="271.78" y1="162.56" x2="264.16" y2="162.56" width="0.1524" layer="91"/>
  <wire x1="259.08" y1="162.56" x2="264.16" y2="162.56" width="0.1524" layer="91"/>
  <junction x="259.08" y="162.56"/>
@@ -6807,6 +6839,7 @@ http://www.weartronics.com/</description>
  <wire x1="243.84" y1="162.56" x2="243.84" y2="160.02" width="0.1524" layer="91"/>
  <pinref part="CN6" gate="G$1" pin="4"/>
  <wire x1="284.48" y1="129.54" x2="287.02" y2="129.54" width="0.1524" layer="91"/>
+<pinref part="CN12" gate="G$1" pin="8"/>
  </segment>
  </net>
  <net name="N$49" class="0">
@@ -6907,14 +6940,14 @@ http://www.weartronics.com/</description>
  <wire x1="243.84" y1="147.32" x2="243.84" y2="149.86" width="0.1524" layer="91"/>
  </segment>
  <segment>
-<pinref part="CN12" gate="G$1" pin="13"/>
  <wire x1="271.78" y1="170.18" x2="269.24" y2="170.18" width="0.1524" layer="91"/>
  <wire x1="269.24" y1="170.18" x2="269.24" y2="157.48" width="0.1524" layer="91"/>
-<pinref part="CN12" gate="G$1" pin="12"/>
  <wire x1="271.78" y1="172.72" x2="269.24" y2="172.72" width="0.1524" layer="91"/>
  <wire x1="269.24" y1="172.72" x2="269.24" y2="170.18" width="0.1524" layer="91"/>
  <junction x="269.24" y="170.18"/>
  <pinref part="V92" gate="G$1" pin="RF"/>
+<pinref part="CN12" gate="G$1" pin="4"/>
+<pinref part="CN12" gate="G$1" pin="5"/>
  </segment>
  </net>
  <net name="N$59" class="0">
@@ -6929,7 +6962,7 @@ http://www.weartronics.com/</description>
  <junction x="195.58" y="127"/>
  </segment>
  </net>
-<net name="!CPPT!" class="0">
+<net name="!CPTT!" class="0">
  <segment>
  <pinref part="LD2" gate="G$1" pin="C"/>
  <wire x1="223.52" y1="48.26" x2="231.14" y2="48.26" width="0.1524" layer="91"/>
@@ -7063,16 +7096,13 @@ http://www.weartronics.com/</description>
  </net>
  <net name="AIN1" class="0">
  <segment>
-<wire x1="170.18" y1="129.54" x2="160.02" y2="129.54" width="0.1524" layer="91"/>
-<label x="162.56" y="130.048" size="1.4224" layer="95" ratio="10"/>
-<pinref part="U6" gate="G$1" pin="OUT"/>
-<wire x1="177.8" y1="129.54" x2="170.18" y2="129.54" width="0.1524" layer="91"/>
-<wire x1="170.18" y1="127" x2="170.18" y2="129.54" width="0.1524" layer="91"/>
-<wire x1="170.18" y1="129.54" x2="170.18" y2="147.32" width="0.1524" layer="91"/>
+<pinref part="R9" gate="G$1" pin="1"/>
+<wire x1="162.56" y1="129.54" x2="160.02" y2="129.54" width="0.1524" layer="91"/>
+<label x="158.75" y="130.302" size="1.4224" layer="95" ratio="10"/>
  <pinref part="P1" gate="G$1" pin="1"/>
-<junction x="170.18" y="129.54"/>
-<pinref part="R23" gate="G$1" pin="1"/>
-<wire x1="170.18" y1="147.32" x2="182.88" y2="147.32" width="0.1524" layer="91"/>
+<wire x1="160.02" y1="129.54" x2="157.48" y2="129.54" width="0.1524" layer="91"/>
+<wire x1="160.02" y1="127" x2="160.02" y2="129.54" width="0.1524" layer="91"/>
+<junction x="160.02" y="129.54"/>
  </segment>
  </net>
  <net name="DAC1_OUT" class="0">
@@ -7205,7 +7235,6 @@ http://www.weartronics.com/</description>
  <pinref part="CN9" gate="G$1" pin="10"/>
  <wire x1="256.54" y1="48.26" x2="284.48" y2="48.26" width="0.1524" layer="91"/>
  <wire x1="256.54" y1="142.24" x2="254" y2="142.24" width="0.1524" layer="91"/>
-<pinref part="CN12" gate="G$1" pin="14"/>
  <wire x1="256.54" y1="167.64" x2="271.78" y2="167.64" width="0.1524" layer="91"/>
  <wire x1="218.44" y1="167.64" x2="254" y2="167.64" width="0.1524" layer="91"/>
  <pinref part="C45" gate="G$1" pin="1"/>
@@ -7213,6 +7242,7 @@ http://www.weartronics.com/</description>
  <wire x1="218.44" y1="162.56" x2="218.44" y2="167.64" width="0.1524" layer="91"/>
  <wire x1="254" y1="142.24" x2="254" y2="167.64" width="0.1524" layer="91"/>
  <junction x="254" y="167.64"/>
+<pinref part="CN12" gate="G$1" pin="6"/>
  </segment>
  </net>
  <net name="N$8" class="0">
@@ -7326,17 +7356,17 @@ http://www.weartronics.com/</description>
  </segment>
  <segment>
  <pinref part="C23" gate="G$1" pin="2"/>
-<wire x1="17.78" y1="40.64" x2="17.78" y2="38.1" width="0.1524" layer="91"/>
+<wire x1="10.16" y1="40.64" x2="10.16" y2="38.1" width="0.1524" layer="91"/>
  <pinref part="U$19" gate="G$1" pin="AVSS"/>
  </segment>
  <segment>
  <pinref part="R22" gate="G$1" pin="1"/>
-<wire x1="27.94" y1="55.88" x2="27.94" y2="53.34" width="0.1524" layer="91"/>
+<wire x1="20.32" y1="55.88" x2="20.32" y2="53.34" width="0.1524" layer="91"/>
  <pinref part="U$20" gate="G$1" pin="AVSS"/>
  </segment>
  <segment>
  <pinref part="R46" gate="G$1" pin="1"/>
-<wire x1="43.18" y1="48.26" x2="43.18" y2="50.8" width="0.1524" layer="91"/>
+<wire x1="35.56" y1="48.26" x2="35.56" y2="50.8" width="0.1524" layer="91"/>
  <pinref part="U$21" gate="G$1" pin="AVSS"/>
  </segment>
  <segment>
@@ -7418,6 +7448,11 @@ http://www.weartronics.com/</description>
  <wire x1="381" y1="129.54" x2="381" y2="127" width="0.1524" layer="91"/>
  <pinref part="U$45" gate="G$1" pin="AVSS"/>
  </segment>
+<segment>
+<pinref part="C57" gate="G$1" pin="2"/>
+<wire x1="45.72" y1="45.72" x2="45.72" y2="43.18" width="0.1524" layer="91"/>
+<pinref part="U$50" gate="G$1" pin="AVSS"/>
+</segment>
  </net>
  <net name="AVDD" class="0">
  <segment>
@@ -7499,11 +7534,42 @@ http://www.weartronics.com/</description>
  <pinref part="U$44" gate="G$1" pin="AVDD"/>
  </segment>
  </net>
+<net name="N$27" class="0">
+<segment>
+<pinref part="U6" gate="G$1" pin="OUT"/>
+<wire x1="177.8" y1="129.54" x2="175.26" y2="129.54" width="0.1524" layer="91"/>
+<pinref part="R9" gate="G$1" pin="2"/>
+<wire x1="172.72" y1="129.54" x2="175.26" y2="129.54" width="0.1524" layer="91"/>
+<pinref part="R23" gate="G$1" pin="1"/>
+<wire x1="182.88" y1="147.32" x2="175.26" y2="147.32" width="0.1524" layer="91"/>
+<wire x1="175.26" y1="147.32" x2="175.26" y2="129.54" width="0.1524" layer="91"/>
+<junction x="175.26" y="129.54"/>
+</segment>
+</net>
+<net name="N$32" class="0">
+<segment>
+<pinref part="U9" gate="G$1" pin="OUT"/>
+<pinref part="R29" gate="G$1" pin="1"/>
+<wire x1="124.46" y1="129.54" x2="127" y2="129.54" width="0.1524" layer="91"/>
+<pinref part="C54" gate="G$1" pin="2"/>
+<wire x1="127" y1="129.54" x2="129.54" y2="129.54" width="0.1524" layer="91"/>
+<wire x1="129.54" y1="154.94" x2="132.08" y2="154.94" width="0.1524" layer="91"/>
+<wire x1="132.08" y1="154.94" x2="132.08" y2="147.32" width="0.1524" layer="91"/>
+<pinref part="R42" gate="G$1" pin="1"/>
+<wire x1="132.08" y1="147.32" x2="127" y2="147.32" width="0.1524" layer="91"/>
+<wire x1="127" y1="147.32" x2="124.46" y2="147.32" width="0.1524" layer="91"/>
+<wire x1="127" y1="129.54" x2="127" y2="147.32" width="0.1524" layer="91"/>
+<junction x="127" y="147.32"/>
+<junction x="127" y="129.54"/>
+</segment>
+</net>
  </nets>
  </sheet>
  </sheets>
  <errors>
  <approved hash="104,2,60.96,48.26,U8,GND,AVSS,,,"/>
+<approved hash="110,1,86.36,226.06,AIN1,AIN2,,,,"/>
+<approved hash="110,1,86.36,226.06,AIN1,AIN2,,,,"/>
  </errors>
  </schematic>
  </drawing>
diff --git a/smartmic/SM1000-C/eagle.epf b/smartmic/SM1000-C/eagle.epf

index 97bd6e2f4131e7b6e8e45e5f291273a30f9ebd02..9ea41304923b93c3277d6c1236043729acee3380 100644 (file)
--- a/smartmic/SM1000-C/eagle.epf
+++ b/smartmic/SM1000-C/eagle.epf
@@ -393,7 +393,7 @@ UsedLibrary="C:/Users/rbarnich/My Projects/PIC32MZ/PIC32MZ.lbr"
  \r
  [Win_1]\r
  Type="Control Panel"\r
-Loc="718 128 1317 450"\r
+Loc="877 245 1476 567"\r
  State=2\r
  Number=0\r
  \r
author	rickb44 <rickb44@01035d8c-6547-0410-b346-abe4f91aad63>
	Wed, 24 Sep 2014 19:07:51 +0000 (19:07 +0000)
committer	rickb44 <rickb44@01035d8c-6547-0410-b346-abe4f91aad63>
	Wed, 24 Sep 2014 19:07:51 +0000 (19:07 +0000)
smartmic/SM1000-C/Change-Log-C.txt		patch \| blob \| history
smartmic/SM1000-C/SM1000-C.brd		patch \| blob \| history
smartmic/SM1000-C/SM1000-C.pdf	[new file with mode: 0644]	patch \| blob
smartmic/SM1000-C/SM1000-C.sch		patch \| blob \| history
smartmic/SM1000-C/eagle.epf		patch \| blob \| history