drowe67 [Thu, 19 Mar 2015 09:37:06 +0000 (09:37 +0000)]
most rx filtering working in C, next step add coarse timing (frame snyc) in C
git-svn-id: https://svn.code.sf.net/p/freetel/code@2083
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Wed, 18 Mar 2015 21:32:56 +0000 (21:32 +0000)]
rate Fs tx and rx filtering working, a preliminary frame sync (coarse timing) and BER measurment working in Octave. next step, set up C side to match that
git-svn-id: https://svn.code.sf.net/p/freetel/code@2082
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Wed, 18 Mar 2015 19:49:08 +0000 (19:49 +0000)]
README changes thats Eric for the patch
git-svn-id: https://svn.code.sf.net/p/freetel/code@2081
01035d8c-6547-0410-b346-
abe4f91aad63
hobbes1069 [Tue, 17 Mar 2015 13:12:40 +0000 (13:12 +0000)]
Updates to documentation
git-svn-id: https://svn.code.sf.net/p/freetel/code@2080
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Tue, 17 Mar 2015 04:17:49 +0000 (04:17 +0000)]
tx filtering and up conversion working in Octave
git-svn-id: https://svn.code.sf.net/p/freetel/code@2079
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Mon, 16 Mar 2015 23:18:36 +0000 (23:18 +0000)]
coherent modem C and Octave code giving the same results with AWGN noise at rate Rs.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2078
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Mon, 16 Mar 2015 23:05:59 +0000 (23:05 +0000)]
some in progress octave scripts
git-svn-id: https://svn.code.sf.net/p/freetel/code@2077
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Sun, 15 Mar 2015 21:05:37 +0000 (21:05 +0000)]
longer test frame and 1Hz freq offset, tests passing OK
git-svn-id: https://svn.code.sf.net/p/freetel/code@2076
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Sun, 15 Mar 2015 03:05:26 +0000 (03:05 +0000)]
rx symbols in C and octave match
git-svn-id: https://svn.code.sf.net/p/freetel/code@2075
01035d8c-6547-0410-b346-
abe4f91aad63
baobrien [Sat, 14 Mar 2015 23:48:55 +0000 (23:48 +0000)]
Further work on cic interpolator, some stm32 testing
git-svn-id: https://svn.code.sf.net/p/freetel/code@2074
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Sat, 14 Mar 2015 06:40:03 +0000 (06:40 +0000)]
coh psk demod phase correction starting to do something sensible, still to complete testing
git-svn-id: https://svn.code.sf.net/p/freetel/code@2073
01035d8c-6547-0410-b346-
abe4f91aad63
baobrien [Fri, 13 Mar 2015 18:28:35 +0000 (18:28 +0000)]
cleaned up upconverter, optimized into single loop, optimized out some temp memory
git-svn-id: https://svn.code.sf.net/p/freetel/code@2072
01035d8c-6547-0410-b346-
abe4f91aad63
baobrien [Fri, 13 Mar 2015 05:35:54 +0000 (05:35 +0000)]
fir/cic 10x comp->real converter now works. cleanup still needed.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2071
01035d8c-6547-0410-b346-
abe4f91aad63
baobrien [Fri, 13 Mar 2015 01:12:05 +0000 (01:12 +0000)]
cic 8k complex to 80k real converter confirmed in C. More work still needed.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2070
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Thu, 12 Mar 2015 06:34:52 +0000 (06:34 +0000)]
first test of coh pdsk modem passes, tets framework started
git-svn-id: https://svn.code.sf.net/p/freetel/code@2069
01035d8c-6547-0410-b346-
abe4f91aad63
baobrien [Wed, 11 Mar 2015 22:06:01 +0000 (22:06 +0000)]
reverting changes to iir_duc.m
git-svn-id: https://svn.code.sf.net/p/freetel/code@2068
01035d8c-6547-0410-b346-
abe4f91aad63
baobrien [Wed, 11 Mar 2015 21:19:13 +0000 (21:19 +0000)]
Removed file left over by octave
git-svn-id: https://svn.code.sf.net/p/freetel/code@2067
01035d8c-6547-0410-b346-
abe4f91aad63
baobrien [Wed, 11 Mar 2015 20:22:50 +0000 (20:22 +0000)]
Work on 8Ksps->80Ksps upconversion and CIC filter
git-svn-id: https://svn.code.sf.net/p/freetel/code@2066
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Wed, 11 Mar 2015 06:46:22 +0000 (06:46 +0000)]
starting coherent PSK C port and test framework, compiles OK but not tested
git-svn-id: https://svn.code.sf.net/p/freetel/code@2065
01035d8c-6547-0410-b346-
abe4f91aad63
hobbes1069 [Mon, 9 Mar 2015 16:10:58 +0000 (16:10 +0000)]
Update dependencies and pass needed agruments to static Codec2 build since it also depends on Speex.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2064
01035d8c-6547-0410-b346-
abe4f91aad63
hobbes1069 [Mon, 9 Mar 2015 15:42:58 +0000 (15:42 +0000)]
Merge dependency scanner from codec2 to codec2-dev.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2063
01035d8c-6547-0410-b346-
abe4f91aad63
hobbes1069 [Mon, 9 Mar 2015 14:59:12 +0000 (14:59 +0000)]
Initial build speex cmake module.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2062
01035d8c-6547-0410-b346-
abe4f91aad63
baobrien [Mon, 9 Mar 2015 02:54:54 +0000 (02:54 +0000)]
Verified IIR upconverter, modified fast_dac_ut.c to run upconverter
git-svn-id: https://svn.code.sf.net/p/freetel/code@2061
01035d8c-6547-0410-b346-
abe4f91aad63
baobrien [Sat, 7 Mar 2015 06:51:55 +0000 (06:51 +0000)]
Rolling back accidental changes from first commit
git-svn-id: https://svn.code.sf.net/p/freetel/code@2060
01035d8c-6547-0410-b346-
abe4f91aad63
baobrien [Sat, 7 Mar 2015 06:45:43 +0000 (06:45 +0000)]
Brady's first commit
-IIR tner is fixed point
-IIR tuner center changed to 700Khz
-IIR Upconverter simulated in octave
-STM32F4 DAC code copied and modified to support high sample rate on DAC1 (2Mhz)
-Got a start on the C IIR Upconverter. Not tested yet.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2059
01035d8c-6547-0410-b346-
abe4f91aad63
hobbes1069 [Fri, 6 Mar 2015 21:07:08 +0000 (21:07 +0000)]
Updates to allow static speex building.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2058
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Fri, 6 Mar 2015 07:17:07 +0000 (07:17 +0000)]
protected against overflow error in 3200 mode
git-svn-id: https://svn.code.sf.net/p/freetel/code@2057
01035d8c-6547-0410-b346-
abe4f91aad63
hobbes1069 [Thu, 5 Mar 2015 22:10:37 +0000 (22:10 +0000)]
Merge build system updates from fdmdv2 to fdmdv2-dev.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2056
01035d8c-6547-0410-b346-
abe4f91aad63
hobbes1069 [Thu, 5 Mar 2015 22:05:54 +0000 (22:05 +0000)]
Fix linking order of libsndfile to be after sox to make static build of sox happy. Tweak Bootstrapping of wxWidgets, still needs work though.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2055
01035d8c-6547-0410-b346-
abe4f91aad63
hobbes1069 [Thu, 5 Mar 2015 20:57:14 +0000 (20:57 +0000)]
Update wxWidgets bootstrap to 3.0.2 and other tweaks.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2054
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Thu, 5 Mar 2015 20:26:46 +0000 (20:26 +0000)]
Change silkscree to fit Rwoetel logo on front & rear panel.
Increased size of logos.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2053
01035d8c-6547-0410-b346-
abe4f91aad63
hobbes1069 [Tue, 3 Mar 2015 20:45:27 +0000 (20:45 +0000)]
More svn cleanup.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2052
01035d8c-6547-0410-b346-
abe4f91aad63
hobbes1069 [Tue, 3 Mar 2015 20:34:19 +0000 (20:34 +0000)]
Removing old manual makefiles and automake files.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2051
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Tue, 3 Mar 2015 18:16:29 +0000 (18:16 +0000)]
Changed text legends to fit, SPKR VOLUME, rear panel logo.
Ready for final review & release to manufacturing - RGB
git-svn-id: https://svn.code.sf.net/p/freetel/code@2050
01035d8c-6547-0410-b346-
abe4f91aad63
hobbes1069 [Tue, 3 Mar 2015 16:03:57 +0000 (16:03 +0000)]
Fix static builds of sox and libsndfile.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2049
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Fri, 27 Feb 2015 20:56:21 +0000 (20:56 +0000)]
added FM demod
git-svn-id: https://svn.code.sf.net/p/freetel/code@2048
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Tue, 24 Feb 2015 15:30:43 +0000 (15:30 +0000)]
Used Foxit markup coments(red rectangles)to indicate changes from Rev B.
Most changes are as result of moving origins to improve part fit.
Corrected geometric constructions that resulted in errors.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2047
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Tue, 24 Feb 2015 04:49:56 +0000 (04:49 +0000)]
tweaks to tuner to get ISR freq right
git-svn-id: https://svn.code.sf.net/p/freetel/code@2046
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Tue, 24 Feb 2015 00:48:48 +0000 (00:48 +0000)]
first pass FM demod working in C
git-svn-id: https://svn.code.sf.net/p/freetel/code@2045
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Mon, 23 Feb 2015 19:34:35 +0000 (19:34 +0000)]
lATEST Latest ENCL-SM1000-C drawings for Review only - RGB
git-svn-id: https://svn.code.sf.net/p/freetel/code@2044
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Sat, 21 Feb 2015 10:54:44 +0000 (10:54 +0000)]
tuner code for downsampling to 10 kHz working OK, ready for tetsing on real signals
git-svn-id: https://svn.code.sf.net/p/freetel/code@2043
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Fri, 20 Feb 2015 21:34:54 +0000 (21:34 +0000)]
tuner ISR running in about 13% of CPU
git-svn-id: https://svn.code.sf.net/p/freetel/code@2042
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Fri, 20 Feb 2015 06:35:11 +0000 (06:35 +0000)]
first pass at tuner UT, some building issues
git-svn-id: https://svn.code.sf.net/p/freetel/code@2041
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Fri, 20 Feb 2015 03:09:32 +0000 (03:09 +0000)]
STM32 tuner unit test looking good
git-svn-id: https://svn.code.sf.net/p/freetel/code@2040
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Thu, 19 Feb 2015 01:45:50 +0000 (01:45 +0000)]
Octave simulation of ADC decimation
git-svn-id: https://svn.code.sf.net/p/freetel/code@2039
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Fri, 6 Feb 2015 04:20:49 +0000 (04:20 +0000)]
code for estimating C/No
git-svn-id: https://svn.code.sf.net/p/freetel/code@2038
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Fri, 6 Feb 2015 00:54:28 +0000 (00:54 +0000)]
messed with a few plots
git-svn-id: https://svn.code.sf.net/p/freetel/code@2037
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Tue, 3 Feb 2015 02:34:23 +0000 (02:34 +0000)]
plotting FM signal noise power, fixed noise BW issue, ouputting error pattern file
git-svn-id: https://svn.code.sf.net/p/freetel/code@2036
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Mon, 2 Feb 2015 00:09:24 +0000 (00:09 +0000)]
improved analog FM demod, less clicks in output now, comparable results to HSPDR demod
git-svn-id: https://svn.code.sf.net/p/freetel/code@2035
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Fri, 30 Jan 2015 00:01:01 +0000 (00:01 +0000)]
improved SNR estimation, about half a dB off
git-svn-id: https://svn.code.sf.net/p/freetel/code@2034
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Wed, 28 Jan 2015 23:56:23 +0000 (23:56 +0000)]
add some lower bound error checking for noise calcs
git-svn-id: https://svn.code.sf.net/p/freetel/code@2033
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Wed, 28 Jan 2015 23:35:03 +0000 (23:35 +0000)]
first pass at SNR est
git-svn-id: https://svn.code.sf.net/p/freetel/code@2032
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Wed, 28 Jan 2015 22:00:26 +0000 (22:00 +0000)]
progressing SNR estimation
git-svn-id: https://svn.code.sf.net/p/freetel/code@2031
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Wed, 28 Jan 2015 20:41:57 +0000 (20:41 +0000)]
test report after testing OTA by Matt, VK5ZM
git-svn-id: https://svn.code.sf.net/p/freetel/code@2030
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Wed, 28 Jan 2015 04:50:51 +0000 (04:50 +0000)]
tweaked a few plots, works Ok, more to come
git-svn-id: https://svn.code.sf.net/p/freetel/code@2029
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Mon, 26 Jan 2015 21:53:31 +0000 (21:53 +0000)]
curve and non-coh working again
git-svn-id: https://svn.code.sf.net/p/freetel/code@2028
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Sun, 25 Jan 2015 08:14:48 +0000 (08:14 +0000)]
file based GMSK routines
git-svn-id: https://svn.code.sf.net/p/freetel/code@2027
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Fri, 23 Jan 2015 17:37:53 +0000 (17:37 +0000)]
config file for Eagle
git-svn-id: https://svn.code.sf.net/p/freetel/code@2026
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Fri, 23 Jan 2015 17:34:48 +0000 (17:34 +0000)]
Production Release of SM1000-D PCB files
git-svn-id: https://svn.code.sf.net/p/freetel/code@2025
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Fri, 23 Jan 2015 01:15:51 +0000 (01:15 +0000)]
redundant files
git-svn-id: https://svn.code.sf.net/p/freetel/code@2024
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Fri, 23 Jan 2015 01:15:11 +0000 (01:15 +0000)]
redundant file
git-svn-id: https://svn.code.sf.net/p/freetel/code@2023
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Fri, 23 Jan 2015 01:14:17 +0000 (01:14 +0000)]
redundant file
git-svn-id: https://svn.code.sf.net/p/freetel/code@2022
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Fri, 23 Jan 2015 01:11:10 +0000 (01:11 +0000)]
Added sensible labels to plots, scaled DCO BW with Rs, near ideal perf now with multipel channel impairments
git-svn-id: https://svn.code.sf.net/p/freetel/code@2021
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Fri, 23 Jan 2015 01:02:21 +0000 (01:02 +0000)]
Post release drawings for SM1000 enclosure RGB
git-svn-id: https://svn.code.sf.net/p/freetel/code@2020
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Fri, 23 Jan 2015 00:49:49 +0000 (00:49 +0000)]
can now run at 1200 bit/s, impl loss a little poorer than 4800, not sure why, PLL BW?
git-svn-id: https://svn.code.sf.net/p/freetel/code@2019
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Wed, 21 Jan 2015 19:20:27 +0000 (19:20 +0000)]
Separate top assembly folder & files
git-svn-id: https://svn.code.sf.net/p/freetel/code@2018
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Wed, 21 Jan 2015 19:19:10 +0000 (19:19 +0000)]
Move Top Assembly items to separate drawing
git-svn-id: https://svn.code.sf.net/p/freetel/code@2017
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Wed, 21 Jan 2015 02:40:28 +0000 (02:40 +0000)]
Added preliminary PDFs of enclosure drawings.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2016
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Mon, 19 Jan 2015 19:36:09 +0000 (19:36 +0000)]
works for a range of sample clock offsets, +/- 500ppm
git-svn-id: https://svn.code.sf.net/p/freetel/code@2015
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Mon, 19 Jan 2015 19:14:56 +0000 (19:14 +0000)]
works for a range of timing offsets
git-svn-id: https://svn.code.sf.net/p/freetel/code@2014
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Sun, 18 Jan 2015 23:55:12 +0000 (23:55 +0000)]
timing estimator doing something sensible
git-svn-id: https://svn.code.sf.net/p/freetel/code@2013
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Sun, 18 Jan 2015 03:30:13 +0000 (03:30 +0000)]
Update Change Log file.
git-svn-id: https://svn.code.sf.net/p/freetel/code@2012
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Sat, 17 Jan 2015 16:05:45 +0000 (16:05 +0000)]
Update "PCB Documentation Check List"
git-svn-id: https://svn.code.sf.net/p/freetel/code@2011
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Fri, 16 Jan 2015 21:15:04 +0000 (21:15 +0000)]
All files for SM1000-D PCB
Gerber Folder Files for PCB fabrication
MFG Folder Files for assembling PCB Documentation Check List.pdf
git-svn-id: https://svn.code.sf.net/p/freetel/code@2010
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Fri, 16 Jan 2015 17:20:17 +0000 (17:20 +0000)]
Davis notes from review meeting
git-svn-id: https://svn.code.sf.net/p/freetel/code@2009
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Fri, 16 Jan 2015 15:22:37 +0000 (15:22 +0000)]
Use PCB Documentation Check List.PDF instead
git-svn-id: https://svn.code.sf.net/p/freetel/code@2008
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Mon, 12 Jan 2015 22:40:38 +0000 (22:40 +0000)]
Incorporated new PTT SW & TrimPOTs
git-svn-id: https://svn.code.sf.net/p/freetel/code@2007
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Mon, 12 Jan 2015 06:36:22 +0000 (06:36 +0000)]
freq offset est and preamble det first pass working, more tesing reqd
git-svn-id: https://svn.code.sf.net/p/freetel/code@2006
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Fri, 9 Jan 2015 01:20:27 +0000 (01:20 +0000)]
added some items to check
git-svn-id: https://svn.code.sf.net/p/freetel/code@2005
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Thu, 8 Jan 2015 03:09:12 +0000 (03:09 +0000)]
Update silk screen .JPG
git-svn-id: https://svn.code.sf.net/p/freetel/code@2004
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Thu, 8 Jan 2015 03:08:23 +0000 (03:08 +0000)]
Update SM1000 Enclosure top, bottom & SIDE PLATE.CAD.
Produce prelim .JPGs
git-svn-id: https://svn.code.sf.net/p/freetel/code@2003
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Thu, 8 Jan 2015 03:06:25 +0000 (03:06 +0000)]
git-svn-id: https://svn.code.sf.net/p/freetel/code@2002
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Thu, 8 Jan 2015 03:06:08 +0000 (03:06 +0000)]
Changed USB con position,
Changed SW 1,2,4 footprint
CHanged MIC footprint
git-svn-id: https://svn.code.sf.net/p/freetel/code@2001
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Wed, 7 Jan 2015 22:04:51 +0000 (22:04 +0000)]
note about checking power switch
git-svn-id: https://svn.code.sf.net/p/freetel/code@2000
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Sun, 4 Jan 2015 02:42:13 +0000 (02:42 +0000)]
notes on testing SM1000 with laptop
git-svn-id: https://svn.code.sf.net/p/freetel/code@1999
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Fri, 2 Jan 2015 17:47:47 +0000 (17:47 +0000)]
Cleanup folder
git-svn-id: https://svn.code.sf.net/p/freetel/code@1998
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Fri, 2 Jan 2015 17:46:33 +0000 (17:46 +0000)]
git-svn-id: https://svn.code.sf.net/p/freetel/code@1997
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Fri, 2 Jan 2015 17:45:30 +0000 (17:45 +0000)]
MOve ENCL folders to smartmic
git-svn-id: https://svn.code.sf.net/p/freetel/code@1996
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Fri, 2 Jan 2015 17:43:50 +0000 (17:43 +0000)]
git-svn-id: https://svn.code.sf.net/p/freetel/code@1995
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Fri, 2 Jan 2015 17:43:20 +0000 (17:43 +0000)]
git-svn-id: https://svn.code.sf.net/p/freetel/code@1994
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Fri, 2 Jan 2015 17:41:17 +0000 (17:41 +0000)]
Update files
git-svn-id: https://svn.code.sf.net/p/freetel/code@1993
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Thu, 1 Jan 2015 22:13:12 +0000 (22:13 +0000)]
few BOM issues to changelog
git-svn-id: https://svn.code.sf.net/p/freetel/code@1992
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Thu, 1 Jan 2015 16:03:53 +0000 (16:03 +0000)]
Renamed folder to reflect A Revision
Should have originated in separate folder, not in SM1000-X. - RGB
git-svn-id: https://svn.code.sf.net/p/freetel/code@1991
01035d8c-6547-0410-b346-
abe4f91aad63
rickb44 [Thu, 1 Jan 2015 16:00:34 +0000 (16:00 +0000)]
Rename folder & files to reflect A Revision - RGB
git-svn-id: https://svn.code.sf.net/p/freetel/code@1990
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Wed, 31 Dec 2014 06:34:06 +0000 (06:34 +0000)]
first pass at coarse frame sync, working OK even for large freq offsets like +/-50Hz
git-svn-id: https://svn.code.sf.net/p/freetel/code@1989
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Tue, 30 Dec 2014 04:44:00 +0000 (04:44 +0000)]
thoughts on using headphones to change log
git-svn-id: https://svn.code.sf.net/p/freetel/code@1988
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Tue, 30 Dec 2014 01:59:15 +0000 (01:59 +0000)]
test plan and change log updates
git-svn-id: https://svn.code.sf.net/p/freetel/code@1987
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Tue, 30 Dec 2014 01:06:24 +0000 (01:06 +0000)]
added a few change log iterms
git-svn-id: https://svn.code.sf.net/p/freetel/code@1986
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Mon, 29 Dec 2014 11:02:06 +0000 (11:02 +0000)]
finally have phase/freq tracking and timing running with zero impl loss at Eb/No=6dB
git-svn-id: https://svn.code.sf.net/p/freetel/code@1985
01035d8c-6547-0410-b346-
abe4f91aad63
drowe67 [Mon, 29 Dec 2014 09:50:57 +0000 (09:50 +0000)]
few more test plan ideas
git-svn-id: https://svn.code.sf.net/p/freetel/code@1984
01035d8c-6547-0410-b346-
abe4f91aad63