From 85f6ac11db4a47eeb913d0b511c3831b21f38649 Mon Sep 17 00:00:00 2001
From: drowe67 <drowe67@01035d8c-6547-0410-b346-abe4f91aad63>
Date: Fri, 16 Oct 2015 03:10:48 +0000
Subject: [PATCH] exploring waveforms that can pass through legacy radios

git-svn-id: https://svn.code.sf.net/p/freetel/code@2449 01035d8c-6547-0410-b346-abe4f91aad63
---
 codec2-dev/octave/legacyfsk.m | 111 ++++++++++++++++++++++++++++++++++
 1 file changed, 111 insertions(+)
 create mode 100644 codec2-dev/octave/legacyfsk.m

diff --git a/codec2-dev/octave/legacyfsk.m b/codec2-dev/octave/legacyfsk.m
new file mode 100644
index 00000000..e955fdf2
--- /dev/null
+++ b/codec2-dev/octave/legacyfsk.m
@@ -0,0 +1,111 @@
+% legacyfsk.m
+% David Rowe October 2015
+%
+% Attempt at FSK waveform that can pass through legacy FM radios
+% but still be optimally demodulated by SDRs. It doesn't have to be
+% optimally demodulated by legacy radios.  Trick is getting it to
+% pass through 300-3000Hz audio filters in leagcy radios.
+%
+% [ ] code up modulator
+%     [ ] map to two bit symbols
+%     [ ] plot spectrum
+% [ ] can we just get away with a scrambler?
+
+1;
+
+function states = legacyfsk_init()
+  Fs = states.Fs = 96000;
+  Rs = states.Rs = 4800;          
+  Ts = states.Ts = Fs/Rs;
+endfunction
+
+
+% test modulator function
+
+function tx = legacyfsk_mod(states, tx_bits)
+    tx = zeros(states.Ts*length(tx_bits),1);
+    tx_phase = 0;
+    Ts = states.Ts;
+    Fs = states.Fs;
+    Rs = states.Rs
+    f1 = 24E3-Rs/2; f2 = 24E3+Rs/2;
+
+    for i=1:length(tx_bits)
+      if tx_bits(i) == 0
+        tx_phase_vec = tx_phase + (1:Ts)*2*pi*f1/Fs;
+      else
+        tx_phase_vec = tx_phase + (1:Ts)*2*pi*f2/Fs;
+      end
+      tx((i-1)*Ts+1:i*Ts) = 2.0*cos(tx_phase_vec);
+      tx_phase = tx_phase_vec(Ts) - floor(tx_phase_vec(Ts)/(2*pi))*2*pi;
+    end
+endfunction
+
+
+fm;
+
+states = legacyfsk_init();
+nbits = states.Rs;
+Fs= states.Fs;
+test_mode = 1;
+if test_mode == 1
+  tx_bits = round(rand(1, nbits/2));
+else
+  % ...10101... sequence
+  tx_bits = zeros(1, nbits/2);
+  tx_bits(1:2:length(tx_bits)) = 1;
+end
+
+tx_bits_mapped = zeros(1,nbits);
+j = 1;
+for i=1:2:nbits
+  if tx_bits(j)
+    tx_bits_mapped(i) = 1;
+    tx_bits_mapped(i+1) = 0;
+  else
+    tx_bits_mapped(i) = 0;
+    tx_bits_mapped(i+1) = 1;
+  end
+  j++;
+end
+
+tx = legacyfsk_mod(states, tx_bits_mapped);
+Tx=fft(tx);
+TxdB = 20*log10(abs(Tx(1:Fs/2)));
+figure(1)
+clf;
+plot(TxdB)
+axis([1 Fs/2 (max(TxdB)-100) max(TxdB)])
+
+fm_states.Fs = Fs;  
+fm_max = fm_states.fm_max = 3E3;
+fd = fm_states.fd = 5E3;
+fm_states.fc = 24E3;
+
+fm_states.pre_emp = 0;
+fm_states.de_emp  = 1;
+fm_states.Ts = 1;
+fm_states.output_filter = 0;
+fm_states = analog_fm_init(fm_states);
+
+[rx_out rx_bb] = analog_fm_demod(fm_states, tx');
+[b, a] = cheby1(4, 1, 300/Fs, 'high');
+rx_out_hp = filter(b,a,rx_out);
+
+figure(2)
+clf
+subplot(211)
+st = 1; en=40*states.Ts;
+plot(rx_out(st:en));
+subplot(212)
+plot(rx_out_hp(st:en) > 0);
+axis([1 en -0.5 1.5])
+
+figure(3);
+clf;
+subplot(211)
+h = freqz(b,a,Fs);
+plot(20*log10(abs(h(1:4000))))
+subplot(212)
+h = fft(rx_out);
+plot(20*log10(abs(h(1:4000))))
-- 
2.25.1