From 9fd4172b0212386cc9cbe69eaa5e535484b3df21 Mon Sep 17 00:00:00 2001
From: drowe67 <drowe67@01035d8c-6547-0410-b346-abe4f91aad63>
Date: Thu, 25 May 2017 02:31:55 +0000
Subject: [PATCH] making a start on HF noise cancellation problems

git-svn-id: https://svn.code.sf.net/p/freetel/code@3142 01035d8c-6547-0410-b346-abe4f91aad63
---
 codec2-dev/octave/impulse_noise.m | 122 ++++++++++++++++++++++++++++++
 1 file changed, 122 insertions(+)
 create mode 100644 codec2-dev/octave/impulse_noise.m

diff --git a/codec2-dev/octave/impulse_noise.m b/codec2-dev/octave/impulse_noise.m
new file mode 100644
index 00000000..dee5c5db
--- /dev/null
+++ b/codec2-dev/octave/impulse_noise.m
@@ -0,0 +1,122 @@
+% impulse_noise
+% David Rowe May 2017
+%
+% Experiments with impulsive noise and HF radio
+
+format;
+more off;
+rand('seed',1)
+
+% DFT function ------------------------------------------------
+% note k is on 0..K-1 format, unlike Octave fft() which is 1..K
+
+function H = calc_H(k, K, a, d)
+  L = length(d);
+  H = 0;
+  for i=1:L
+    H += a(i)*exp(-j*2*pi*k*d(i)/K);
+  end
+endfunction
+
+% -----------------------------------------
+% PWM noise simulation
+% -----------------------------------------
+
+function pwm_noise
+
+  Fs   = 10E6;   % sample rate of simulation
+  Fsig = 1E6;    % frequency of our wanted signal
+  Fpwm = 255E3;  % switcher PWM frequency
+  T    = 1;      % length of simulations in seconds
+  Nsam = T*Fs;  
+  Nsamplot = 200;
+  Apwm = 0.1;
+  Asig = -40;    % attenuation of wanted signal in dB
+
+  % generate an impulse train with jitter to simulate switcher noise
+
+  pwm = zeros(1,Fs);
+  Tpwm = floor(Fs/Fpwm);
+  pulse_positions_pwm = Tpwm*(1:T*Fpwm) + round(rand(1,T*Fpwm));
+
+  h_pwm = zeros(1,Nsam);
+  h_pwm(pulse_positions_pwm) = Apwm;
+  h_pwm = h_pwm(1:Nsam);
+ 
+  % add in wanted signal and computer amplitude spectrum
+
+  s = 10^(Asig/20)*cos(2*pi*Fsig*(1:Nsam)/Fs);
+
+  h = h_pwm+s;
+  H = fft(h);
+  Hdb = 20*log10(abs(H)) - 20*log10(Nsam/2);
+
+  figure(1); clf;
+  subplot(211)
+  plot(h(1:Nsamplot));
+  subplot(212)
+  plot(Hdb(1:Nsam/2));
+  axis([0 T*2E6 -120 0]); xlabel('Frequency Hz'); ylabel('Amplityude dBV'); grid;
+
+  printf("pwm rms: %f signal rms: %f noise rms\n", std(h_pwm), std(s));
+endfunction
+
+% -----------------------------------------
+% Single pulse noise simulation
+% -----------------------------------------
+
+function pulse_noise
+
+  % set up short pulse in wide window, consisting of two samples next
+  % to each other
+
+  K = 1024;
+  a(1) = a(2) = 1; d(1) = 10; d(2) = d(1)+1;
+  h = zeros(1,K);
+  h(d(1)) = a(1);
+  h(d(2)) = a(2);
+
+  % mag and phase spectrum, mag spectrum changes slowly
+
+  figure(2); clf;
+  Hfft = fft(h);
+  subplot(311)
+  stem(h(1:100));
+  axis([1 100 -0.2 1.2]);
+  subplot(312)  
+  plot(abs(Hfft(1:K/2)),'+');
+  title('Magnitude');
+  subplot(313)
+  plot(angle(Hfft(1:K/2)),'+');
+  title('Phase');
+
+  % simple test to estimate H(k+1) from H(k) --------------------
+
+  % brute force calculation
+
+  k = 300;
+  H = zeros(1,K);
+  H(k-1) = calc_H(k-1, K, a, d);
+  H(k)   = calc_H(k, K, a, d);
+  H(k+1) = calc_H(k+1, K, a, d);
+
+  % calculation of k+1 from k using approximation that {d(i)} are
+  % close together compared to M, i.e it's a narrow pulse (assumes we
+  % can estimate d using other means)
+
+  Hk1_ = exp(-j*2*pi*d(1)/K)*H(k);
+
+  % plot zoomed in version around k to compare
+
+  figure(3); clf;
+  plot(H(k-1:k+1),'b+','markersize', 10, 'linewidth', 2);
+  hold on; plot(Hk1_,'g+','markersize', 10, 'linewidth', 2); hold off;
+  title('H(k-1) .... H(k+1)');
+  printf("H(k+1) match: %f dB\n", 20*log10(abs(H(k+1) - Hk1_)));
+endfunction
+
+% Run various simulations here ---------------------------------------------
+
+%pwm_noise
+pulse_noise
+
-- 
2.25.1