From e215660257bcf11e720a5e50a870c59526832a91 Mon Sep 17 00:00:00 2001 From: rickb44 Date: Sun, 31 May 2015 03:10:31 +0000 Subject: [PATCH] Added jmpr mono ext speaker situation. Update SM1000-E-change-log file. RGB git-svn-id: https://svn.code.sf.net/p/freetel/code@2168 01035d8c-6547-0410-b346-abe4f91aad63 --- smartmic/SM1000-E/SM1000-E-change-log.txt | 143 ++++++----- smartmic/SM1000-E/SM1000-E.brd | 300 +++++++++++++++++----- smartmic/SM1000-E/SM1000-E.sch | 237 ++++++++++++----- smartmic/SM1000-E/eagle.epf | 2 +- 4 files changed, 485 insertions(+), 197 deletions(-) diff --git a/smartmic/SM1000-E/SM1000-E-change-log.txt b/smartmic/SM1000-E/SM1000-E-change-log.txt index 394aaf71..5cbe0d99 100644 --- a/smartmic/SM1000-E/SM1000-E-change-log.txt +++ b/smartmic/SM1000-E/SM1000-E-change-log.txt @@ -1,101 +1,110 @@ SM1000-E-CHANGE-LOG.TXT 03/30/15 RGB -1. [X] Change PTT sw. to e-switch LC2259OANP. +1. [X] R Change PTT sw. to e-switch LC2259OANP. -2. [X] Change POWER SW to e-switch LC2259EENP. +2. [X] R Change POWER SW to e-switch LC2259EENP. -3. [X] Change SPKR CONN J4 to CONN-BOOM-XH-2A. +3. [X] R+E Change SPKR CONN J4 to CONN-BOOM-XH-2A. + ***** Edwin needs to add mating connector to speaker assembly. -4. [X] Added part outlines to layer tDocu for documentation. - All pars have outline on tplace layer. +4. [X] R Added part outlines to layer tDocu for documentation. + All pars have outline on tplace layer. 05/18/15 -5. [X] Problem with SPKR OUT conn. Shorts output when stereo jack used. - + as per Josh Mesaline email, suggest resistors to tip and ring - so a short doesn't upset amp. Does this mean it will work with - mono and stereo plugs? If stereo only we should note this in UG. - Changed connector to low profile locking type RGB +5. [X] R Problem with SPKR OUT conn. Shorts output when stereo jack used. + + as per Josh Mesaline email, suggest resistors to tip and ring + so a short doesn't upset amp. Does this mean it will work with + mono and stereo plugs? If stereo only we should note this in UG. + ***** Add jmpr to ring terminal to provide ormally open circuit. Shunt must be + provided but only on 1 pin. Customer will place across both jmpr pins for + use with stereo speaker/headphones. -6. [ ] TrimPOT holes, location off by 1mm. +6. [ ] R TrimPOT holes, location off by 1mm. -7. [X] U1, CPU pins extend to the end of the pads. +7. [X] R U1, CPU pins extend to the end of the pads. Corrected RGB -8. [ ] Land pattern for LEDs too large. I will look into this. RGB - Land pattern size recommended by vendor. If too large, need suggestion. RGB +8. [ ] R+E Land pattern for LEDs too large. I will look into this. RGB + ***** Land pattern size recommended by vendor. If too large, need suggested pad size from Edwin. -9. [X] SW5 land pattern too wide. Check specification. +9. [X] R SW5 land pattern too wide. Check specification. Corrected package RGB -10. [X] C32, C59 footprint too short. - corrected package RGB +10. [X] R C32, C59 footprint too short. + corrected package RGB -11. [X] L1 Land pattern too wide. - Corrected package RGB +11. [X] R L1 Land pattern too wide. + Corrected package RGB -12 [X] CN4 Bubble after SMT(high temperature) - No action yet. Edwin, can you find an alternative to fit? If different footprint, let me know and send specification so - I can change it.(RGB) - ***** Edwin reports other vendors parts do same. Action? RGB +12 [X] R+E CN4 Bubble after SMT(high temperature) + No action yet. Edwin, can you find an alternative to fit? If different footprint, let me know and send specification so + Edwin reports other vendors parts do same. Action? RGB + ***** No Action at this time -13. [X] R46 Easy to break R46 with handling. - Add cement after production. - ***** Note, I accidently hit and moved pot removing PCB from case. Suggest applying cement prior to soldering RGB +13. [X] E R46 Easy to break R46 with handling. + Add cement after production. + ***** Note, I accidently hit and moved pot removing PCB from case. + Suggest applying cement prior to soldering RGB -14. [X] PCB Problem reflowing CN10 USB connector. - Make Breakaway 10mm (Edwin) - ***** Vendor problem. RGB +14. [X] E PCB Problem reflowing CN10 USB connector. + Make Breakaway 10mm (Edwin) + ***** Vendor problem. RGB -15 [X] PCB Stencil too small. - Make Stencil 52 x 52 cm(Edwin) - ***** Vendor problem. RGB +15 [X] E PCB Stencil too small. + Make Stencil 52 x 52 cm(Edwin) + ***** Vendor problem. RGB -16 [ ] Firmware Better debouncing software for push button switches (DR) - could be: more solid indication of in DV mode, like two beeps, two flashes +16 [ ] D Firmware Better debouncing software for push button switches (DR) + could be: more solid indication of in DV mode, like two beeps, two flashes -17 [ ] Enclosure Move "Speaker Volume" text lower to clear volume control knob +17 [ ] R Enclosure Move "Speaker Volume" text lower to clear volume control knob -18 [ ] Enclosure Some variablility in gap between lid and front panel, gap is - sometimes wider on one side than another (Edwin) +18 [ ] E Enclosure Some variablility in gap between lid and front panel, gap is + sometimes wider on one side than another (Edwin) -19 [X] PCB change power led from red to green, clip/error led from amber to red? - LED1 GRN, LED2 RED, LED3 GRN, LED4 RED - ***** DO we need new LED packages? +19 [X] R PCB change power led from red to green, clip/error led from amber to red? + LED1 GRN, LED2 RED, LED3 GRN, LED4 RED + ***** DO we need new LED packages? -20 [ ] ?? Mel reported ESD events at Dayton causing SM1000 to crash. - "Gerry and I did notice one thing... the SM1000 appears to be a little - sensitive to ESD events caused by "walking across the carpet in tennis - shoes in the booth and then touching the SM1000." It would stop - working and require toggling power, however it always came back - working ok." - ***** Looking for 0402 or 0603 TVS with 5VDC holding voltage. RGB - Need definition of where to put these. RGB - ***** Is action rqd here? Anything we can do? +20 [ ] R+D Mel reported ESD events at Dayton causing SM1000 to crash. + "Gerry and I did notice one thing... the SM1000 appears to be a little + sensitive to ESD events caused by "walking across the carpet in tennis + shoes in the booth and then touching the SM1000." It would stop + working and require toggling power, however it always came back + working ok." + ***** Will add pads for TVS device across DC power connector & 6 X 3.5mm connectors. + DNL status TBD. RGB -21 [X] From Mel: DNL LED5 and LED8 to save a little power. - DNL LED8, DNL R33, DNL LED5, DNL R17 +21 [X] R Mel: DNL LED5 and LED8 to save a little power. + ***** DNL LED8, DNL R33, DNL LED5, DNL R17 -22 [X] From Mel: Is R42 wired backwards? Higher output CCW vs CW? - Mirrored part, corrected problem. RGB +22 [X] R Mel: Is R42 wired backwards? Higher output CCW vs CW? + Mirrored part, corrected problem. RGB -23 [X] From Mel: Silk screen pin numbers on. Can e make CN12 larger for older Hams? - Added pin nos for 1,8,9,16 RGB +23 [X] R Mel: Silk screen pin numbers on. Can e make CN12 larger for older Hams? + ***** Added pin nos for 1,8,9,16 RGB -24 [ ] From Mel: green led too bright, increase R15 to 1500 ohms - ***** WE should try this on all LEDs and evaluate. RGB +24 [ ] D+E Mel: green led too bright, increase R15 to 1500 ohms + ***** WE should try this on all LEDs and evaluate. RGB -25 [ ] From Mel: different colour case options +25 [ ] NA Mel: different colour case options -26 [ ] From Mel: PTT being pulsed low on power up. +26 [ ] D Mel: PTT being pulsed low on power up. -27 [X] From Peter VK5APR, DC input connector hole offset down wrt to - enclosure on his unit. Is this true on any other - samples, or maybe a 1 off? RJ45 aperture in enclosure - also slightly offset to left. - - ***** RJ45 and Power connectors are almost perfectly aligned on the units I have. - Perhaps a problem when PCBs are assembled into case? RGB +27 [X] R+D Peter VK5APR, DC input connector hole offset down wrt to + enclosure on his unit. Is this true on any other + samples, or maybe a 1 off? RJ45 aperture in enclosure + also slightly offset to left. + ***** RJ45 and Power connectors are almost perfectly aligned on the units I have. + Perhaps a problem when PCBs are assembled into case? RGB + No Action -28 [ ] firmware Check analog speech level in digital mode. +28 [ ] D firmware Check analog speech level in digital mode. + +29. [ ] R Change enclosure side plate for new PTT switch siize & location. + +30 [ ] R Add shunt for #5 above to BOM + +31 [ ] R Add TVS diodes to 3,5mm connectors & DC power Connector diff --git a/smartmic/SM1000-E/SM1000-E.brd b/smartmic/SM1000-E/SM1000-E.brd index 2983d054..ac678065 100644 --- a/smartmic/SM1000-E/SM1000-E.brd +++ b/smartmic/SM1000-E/SM1000-E.brd @@ -8,8 +8,8 @@ - - + + @@ -26,7 +26,7 @@ - + @@ -59,7 +59,7 @@ - + @@ -1548,6 +1548,13 @@ Licensed under TAPR Open Hardware License + + + + + + + @@ -1634,6 +1641,14 @@ INFINEON, www.infineon.com/cmc_upload/0/000/010/257/eh_db_5b.pdf + + + + + + + + @@ -1695,6 +1710,11 @@ INFINEON, www.infineon.com/cmc_upload/0/000/010/257/eh_db_5b.pdf + + + + + @@ -1713,6 +1733,14 @@ INFINEON, www.infineon.com/cmc_upload/0/000/010/257/eh_db_5b.pdf + + + + + + + + @@ -1734,6 +1762,14 @@ INFINEON, www.infineon.com/cmc_upload/0/000/010/257/eh_db_5b.pdf + + + + + + + + @@ -1747,6 +1783,14 @@ INFINEON, www.infineon.com/cmc_upload/0/000/010/257/eh_db_5b.pdf + + + + + + + + <b>Small Outline Package 8</b><br> @@ -1801,6 +1845,10 @@ NS Package M08A >NAME + + + + @@ -1874,6 +1922,12 @@ NS Package M08A + + + + + + @@ -1934,6 +1988,15 @@ NS Package M08A + + + + + + + + + @@ -1965,6 +2028,14 @@ NS Package M08A 8 9 16 + + + + + + + + @@ -2008,6 +2079,14 @@ NS Package M08A >NAME + + + + + + + + @@ -2055,6 +2134,14 @@ NS Package M08A >NAME + + + + + + + + @@ -2072,17 +2159,18 @@ NS Package M08A - - - >NAME + + + + @@ -2229,6 +2317,12 @@ NS Package M08A + + + + + + @@ -2329,6 +2423,10 @@ NS Package M08A >NAME + + + + @@ -3655,6 +3753,8 @@ design rules under a new name. + + @@ -4209,9 +4309,6 @@ design rules under a new name. - - - @@ -4260,10 +4357,97 @@ design rules under a new name. + + + + + + + + + + + + + + + + - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -5117,16 +5301,16 @@ design rules under a new name. - - - - - + + + + + @@ -5432,34 +5616,6 @@ design rules under a new name. - - - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -5580,20 +5736,32 @@ design rules under a new name. - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -6266,10 +6434,10 @@ design rules under a new name. - - - + + + @@ -6323,6 +6491,16 @@ design rules under a new name. + + + + + + + + + + diff --git a/smartmic/SM1000-E/SM1000-E.sch b/smartmic/SM1000-E/SM1000-E.sch index 1cbe5ff5..90e0f3a9 100644 --- a/smartmic/SM1000-E/SM1000-E.sch +++ b/smartmic/SM1000-E/SM1000-E.sch @@ -231,6 +231,13 @@ + + + + + + + @@ -317,6 +324,14 @@ INFINEON, www.infineon.com/cmc_upload/0/000/010/257/eh_db_5b.pdf + + + + + + + + @@ -378,6 +393,11 @@ INFINEON, www.infineon.com/cmc_upload/0/000/010/257/eh_db_5b.pdf + + + + + @@ -396,6 +416,14 @@ INFINEON, www.infineon.com/cmc_upload/0/000/010/257/eh_db_5b.pdf + + + + + + + + @@ -417,6 +445,14 @@ INFINEON, www.infineon.com/cmc_upload/0/000/010/257/eh_db_5b.pdf + + + + + + + + @@ -430,6 +466,14 @@ INFINEON, www.infineon.com/cmc_upload/0/000/010/257/eh_db_5b.pdf + + + + + + + + <b>Dual In Line Package</b> @@ -543,6 +587,10 @@ Source: http://cache.national.com/ds/LM/LM386.pdf >NAME + + + + @@ -616,6 +664,12 @@ Source: http://cache.national.com/ds/LM/LM386.pdf + + + + + + @@ -676,6 +730,15 @@ Source: http://cache.national.com/ds/LM/LM386.pdf + + + + + + + + + @@ -707,6 +770,14 @@ Source: http://cache.national.com/ds/LM/LM386.pdf 8 9 16 + + + + + + + + @@ -750,6 +821,14 @@ Source: http://cache.national.com/ds/LM/LM386.pdf >NAME + + + + + + + + @@ -788,6 +867,14 @@ Source: http://cache.national.com/ds/LM/LM386.pdf >NAME + + + + + + + + @@ -805,17 +892,18 @@ Source: http://cache.national.com/ds/LM/LM386.pdf - - - >NAME + + + + @@ -962,6 +1050,12 @@ Source: http://cache.national.com/ds/LM/LM386.pdf + + + + + + @@ -2463,6 +2557,10 @@ Source: http://cache.national.com/ds/LM/LM386.pdf >NAME + + + + @@ -4195,7 +4293,6 @@ http://www.weartronics.com/ - @@ -4366,6 +4463,8 @@ http://www.weartronics.com/ + + @@ -6241,8 +6340,8 @@ http://www.weartronics.com/ - - + + @@ -6443,9 +6542,6 @@ http://www.weartronics.com/ - - - @@ -6704,9 +6800,9 @@ http://www.weartronics.com/ - - - + + + @@ -6722,20 +6818,27 @@ http://www.weartronics.com/ - - - + + + - - - + + + - - + + + + + + + + + @@ -6839,11 +6942,13 @@ http://www.weartronics.com/ - - + + - + + + @@ -6909,11 +7014,6 @@ http://www.weartronics.com/ - - - - - @@ -7047,13 +7147,13 @@ http://www.weartronics.com/ - - + + + - - + @@ -7144,24 +7244,22 @@ http://www.weartronics.com/ - - - + - - - + - + + - - - + + + + @@ -7440,19 +7538,6 @@ http://www.weartronics.com/ - - - - - - - - - - - - - @@ -7527,11 +7612,15 @@ http://www.weartronics.com/ - - - - - + + + + + + + + + @@ -7924,18 +8013,16 @@ http://www.weartronics.com/ - - + - - - - - - + + + + + @@ -7974,6 +8061,20 @@ http://www.weartronics.com/ + + + + + + + + + + + + + + diff --git a/smartmic/SM1000-E/eagle.epf b/smartmic/SM1000-E/eagle.epf index 84160ce0..d301e45a 100644 --- a/smartmic/SM1000-E/eagle.epf +++ b/smartmic/SM1000-E/eagle.epf @@ -394,7 +394,7 @@ UsedLibrary="C:/Users/rbarnich/My Projects/PIC32MZ/PIC32MZ.lbr" [Win_1] Type="Control Panel" -Loc="920 131 1519 530" +Loc="945 8 1544 407" State=2 Number=0 -- 2.25.1