From f0ee35e263b2caca86cbc7b1b267257768b1cac0 Mon Sep 17 00:00:00 2001 From: drowe67 Date: Thu, 2 Jun 2016 04:39:48 +0000 Subject: [PATCH] initial check on of change log for rev B based on Rev A loading git-svn-id: https://svn.code.sf.net/p/freetel/code@2813 01035d8c-6547-0410-b346-abe4f91aad63 --- sm2000/SM2000-B/change_log.txt | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 sm2000/SM2000-B/change_log.txt diff --git a/sm2000/SM2000-B/change_log.txt b/sm2000/SM2000-B/change_log.txt new file mode 100644 index 00000000..dd43aa01 --- /dev/null +++ b/sm2000/SM2000-B/change_log.txt @@ -0,0 +1,13 @@ +[ ] DR Place C7 much closer to U1. Similar distance to C6 p22. Maybe move C6 and C7 closer if possible. Reduce total area of loop through which power supply currents must flow. + +[ ] DR swap postions of C1 and C2, C3 and C5, C8 and C9. 10n closer to U1 than 100n as smaller cap deals with higher freq currents. C14 & C15 OK. + +[ ] DR C22 4.7uF footprint small for the tant I hand loaded. Pls make larger. + +[ ] DR C114 overlay rotate 180 deg + +[ ] DR Indication on overlay on pin 1 of XTAL1 and XTAL2. Two of the pins + on xtals are connected together (ground pins), I worked out + orientation using a multimeter + +[ ] DR hole size on all (3 pin, 4 pin, etc) 0.1 inch headers too small. -- 2.25.1